 |
 |
 |
|
 |
|
MBD-PDSML-LN2+-O |
- PDSML-LN2+ (Standard Retail
Pack)
|
|
MBD-PDSML-LN2+-B |
|
| |
|
|
|
Form Factor |
|
|
Dimensions |
- 9.6" width x 9.6 " length ,
(24.4cm x 24.4cm), 6 layers
|
| |
|
|
|
CPU |
- Single LGA775 ZIF Socket
- Supports a Quad-Core
Intel® Xeon® 3200 series
processor
- Supports a Dual-Core
Intel® Xeon® 3000 series
processor
- Supports a Quad-Core
Intel® Core™2 Extreme series
processor
- Supports an Intel®
Core™2 Quad series processor
- Supports an Intel®
Core™2 Duo series processor
- Supports an Intel®
Pentium® processor E2000 series
- Supports a Dual-Core
Intel® Pentium® D processor
- Supports an Intel®
Pentium® Extreme Edition processor
- Supports an Intel®
Pentium® 4 processor
- Supports an Intel®
Celeron® processor E1000 series
- Supports an Intel®
Celeron® processor 400 series
- NOTE: This board
DOES NOT support Q9000, E8000, E7000, E5000
series or 45nm processor
|
|
System Bus |
- 1066 / 800 / 533 MHz system
bus
|
| |
|
|
| Memory
Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB of
unbuffered ECC / non-ECC DDR2 667/533MHz
memory (Dual Channel)
|
|
Memory Type |
- DDR2 667/533MHz unbuffered
ECC / non-ECC SDRAM, 240-pin gold-plated
DIMMs
|
|
DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2GB
|
|
Memory Voltage |
|
| |
|
|
|
Chipset |
- Intel 3000 (Mukilteo-2)
chipset
- ICH7R + Intel® 82573V +
Intel® 82573L
|
|
Serial ATA |
- Intel® ICH7R SATA2 (3 Gbps)
controller built-in
- Intel:
RAID 0, 1, 5, 10 support (Windows Only)
|
|
IPMI |
|
|
Network Controllers |
- 1x Intel® 82573V Gigabit
PCI-Express Ethernet
- 1x Intel® 82573L Gigabit
PCI-Express Ethernet
- Supports 10Base-T,
100Base-TX, 1000BASE-TX, RJ45 output
|
|
VGA |
- On-board XGI Volari Z7
graphics
|
|
Super I/O |
|
|
Clock Generator |
|
| |
|
|
|
Serial ATA |
- Four Serial ATA ports (3
Gbps performance)
- Four SATA hard drives
supported
|
|
IDE |
- One EIDE channel supports
up to two UDMA IDE devices
|
|
Floppy |
- 1 Floppy controller; 1.44
MB
|
|
LAN |
|
|
USB |
- 6x USB 2.0 compliant / 1.1
compatible
- 4x internal USB headers
- 2x rear ports
|
|
VGA |
|
|
Keyboard / Mouse |
- PS/2 keyboard and mouse
ports
|
|
Serial Ports |
- 1x Fast UART 16550 serial
port
- 1x Header
|
|
|
 |
|
|
|
1U Chassis |
|
|
2U Chassis |
|
|
Mid-Tower |
|
|
Tower / 4U Rackmount |
|
|
Important Note |
- To ensure system stability,
a 300W (minimum) ATX power supply [4-pin
+12V AND (20 or 24-pin)] is recommended.
|
| |
|
|
|
Universal Slot |
- 1 (x8) PCI-Express Slot OR
- 1x 32-bit 33MHz PCI Slot
|
|
PCI-Express |
- 1 (x4) PCI-e (using x8)
slot
|
|
PCI |
- 1x 32-bit 33MHz PCI (5V)
slot
|
| |
|
|
|
BIOS Type |
- 8Mb Flash EEPROM with
Phoenix BIOS®
|
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- ACPI 1.0 (limited)
- USB Keyboard support
- SMBIOS 2.3
|
| |
|
|
|
Software |
- Optional IPMI (Intelligent
Platform Management Interface) 2.0
-
SuperDoctor® III
- Watch Dog
- NMI
- W83793 H/W Monitor
|
|
Power Configurations |
- ACPI/APM Power Management
- Main Switch Override
Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode control for
AC power loss recovery
- Internal / External Modem
Rign-on
|
| |
|
|
|
Voltage |
- Monitors for CPU Cores
+1.8V, +3.3V, +5V, ±12V, +5V Standby
- CPU 3-Phase-switching
voltage regulator with auto-sense from
0.8375V-1.6000V
|
|
FAN |
- Total of six 4-pin fan
headers
- 6 fans with tachometer
monitoring
- Status monitor with
firmware speed control
- Low noise fan speed control
- Status monitor for on/off
control
- Support 3-pin fans (without
speed control)
- Pulse Width Modulated (PWM)
fan connector
|
|
Temperature |
- Monitoring for CPU and
chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2)
support
- PECI
|
|
LED |
- CPU / System Overheat LED
- Standby Power alert LED
|
|
Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
|
|
RoHS
|
|
|
Environmental Spec. |
- Operating Temperature:
10°to 35°C (50°to 95°F)
- Non-operating Temperature:
-40°to 70°C (-40°to 158°F)
- Operating Relative
Humidity: 8% to 90% (non-condensing)
- Non-operating Relative
Humidity: 5 to 95% (non-condensing)
|
| |
|
|
|
FCC |
- Passed to meet FCC standard
requirement
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
| |
Part Number |
Qty |
Description |
|
PDSML-LN2+ |
MBD-PDSML-LN2+-O |
1 |
PDSML-LN2+
Motherboard |
|
Manual(s) |
MNL-0903 |
1 |
Motherboard Manual for PDSML-LN2+ |
|
I/O Cables |
CBL-0022L
CBL-0036L-03
CBL-0044L |
1
1
4 |
ATX Floppy
Cable
ATA 66/100 IDE LP Cable
SATA Cable (2Ft.) |
|
I/O Shield |
CSE-PT07L |
1 |
I/O Shield
for PDSML-LN2+ |
|
Quick Reference Guide |
MNL-0903-QRG |
1 |
Quick Reference Guide |
|
|
|
|
|
| |
Part Number |
Qty |
Description |
| Heat Sink |
SNK-P0016 |
- |
1U, Pentium® D LGA775,
Passive Heatsink |
| Riser Card |
RSC-RR1U-32L
RSC-RR1U-E8 |
-
- |
1U 32-bit PCI Riser Card
(Full height, full length)
1U Universal (SXB-E) Slot to PCI-E Slot Riser Card |
|
|
|
|
 |
|
 |
|
Key Features
1. Intel® Xeon® 3200 / 3000 Series,
Core™ 2 Quad / Duo Series,
Pentium® D, Pentium Extreme Edition,
Pentium 4 & Celeron D in LGA775
Package (FSB 1066/800/533)
2. Intel® 3000 (Mukilteo-2) Chipset
3. Up to 8GB unbuffered ECC / non-ECC
DDR2 667/533 SDRAM
4. 1x Intel® 82573L PCI-e Gigabit LAN
1x Intel® 82573V PCI-e Gigabit LAN
5. Built-in SATA ICH7R Controller
4x SATA (3 Gbps) Drive with
RAID 0, 1, 5, 10 Support
6. 1 (x4) PCI-Express,
1 Universal Slot Supporting:
1 (x8) PCI-Express OR
1x 32-bit 33MHz PCI slot,
1x 32-bit 33MHz PCI
7. On board XGI Volari Z7 Graphics
8. IPMI 2.0 Support
|
|
|
|
|
|
|