 |
|
SKU |
|
| |
|
|
|
Form Factor |
|
|
Dimensions |
- 16" x 13" (40.6cm x 33.2cm)
|
| |
|
|
|
CPU |
- Quad 1207-pin Socket F
- Supports up to four
Six-Core / Quad-Core / Dual-Core AMD Opteron™
8000 Series processors
- HT3.0 Link support ^
|
| Chipset |
- nVidia MCP55 Pro
- AMD 8132
|
| |
|
|
|
Memory Capacity |
- Sixteen 240-pin DIMM
sockets
- Supports up to 128GB DDR2
800/667/533 MHz memory
- Single or Dual
(recommended) channel memory support
- For Quad CPUs: Recommended
that memory be populated equally in adjacent
memory banks
|
|
Memory Type |
- DDR2 800/667/533MHz Reg.
ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
|
DIMM Sizes |
- 256MB, 512MB, 1GB, 2GB,
4GB, 8GB
|
|
Memory Voltage |
|
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors
(using ECC memory)
|
| |
|
|
|
SCSI |
- Adaptec AIC-7902W
Controller
- Dual-Channel Ultra320 SCSI
with Host RAID (Host RAID only supports 4
drives)
- Host RAID 0, 1, 10, JBOD
|
|
SATA |
- nVidia MCP55 Pro SATA2
3.0Gbps Controller
- 6 SATA2 Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5 JBOD
Support
|
|
IPMI |
- Support for Intelligent
Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMSO)
- (Optional:
AOC-SIMSO R 3.00)
- NOTE: KVM-over-LAN
not supported - there is no DVO signal to
the IPMI slot
- RMM (Remote Management
Module)
- (Card not included)
-
For Dedicated
LAN, cable CBL-0177L must be used (cable
sold separately)
|
|
Network Controllers |
- Intel® 82546GB Dual Port
Gigabit Ethernet Controller
- Supports 10BASE-T,
100BASE-TX, and 1000BASE-T, RJ45 output
|
|
Super I/O |
|
|
VGA |
- ATI ES1000 Graphics
Controller
16MB Graphics & VGA port
|
| |
|
|
|
BIOS Type |
- 8Mb Flash EEPROM with AMI®
BIOS
- SST 49LF080A BIOS Chip
|
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
| |
|
|
|
PCI-Express |
|
|
HyperTransport |
- 1 HyperTransport (HTX)
Connectors
|
|
 |
|
|
|
|
|
Important Chassis Notes |
- To ensure system stability,
a 1000W (minimum) ATX power supply
[ 8-pin & 8-pin (+12V) and 24-pin are
required]
|
| |
|
|
|
SATA |
|
|
IDE |
- Single EIDE channel support
up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
|
Floppy |
- 1 Floppy port; 1.44 MB
support
|
|
LAN |
|
|
USB |
- FUCI
- Up to 4 USB Ports 2.0
Compliant
- 2 Rear Ports
- 2 Internal Headers
|
|
Keyboard / Mouse |
- PS/2 keyboard and mouse
ports
|
|
Serial Ports |
- 1 Fast UART 16550 serial
port
- 1 Header
|
|
VGA |
|
|
Others |
- 1 SATA DOM power connector
|
| |
|
|
|
Software |
- Optional IPMI (Intelligent
Platform Management Interface) 2.0
-
Super
Doctor III
- Watch Dog
|
|
Power Configurations |
- ACPI Power Management
- Main Switch Override
Mechanism
- Wake-On-Ring (WOR) headert
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from
Soft-Off
- Power-on mode control for
AC power loss recovery
- Internal/External modem
remote ring-on
|
| |
|
|
|
CPU |
- Monitors CPU Core Voltages,
+3.3V, +5V, +12V, 5V Standby, VBAT
- CPU switching voltage
regulator
|
|
FAN |
- Total up to 9-fan status
tachometer monitoring
- Up to nine 3-pin fan
headers
- Status monitor for speed
control
- Support 3-pin fans with
fan-speed control
|
|
Temperature |
- Monitoring for CPU and
chassis environment
- CPU Thermal Trip Support
- PC Temperature Sensing
Logic
|
|
LED |
- CPU / System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED
|
|
Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
|
|
RoHS
|
|
|
Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative
Humidity:
8% to 90% (non-condensing)
- Non-operating Relative
Humidity:
5% to 95% (non-condensing)
|
| |
|
|
|
FCC |
- Passed to meet FCC standard
requirement
|
|