|
|
|
|
H8DIi+ |
|
Form Factor |
|
Dimensions |
- 12" x 13.05" (30.5cm x
33.2cm)
|
|
|
CPU |
- Dual 1207-pin Socket F
- Supports up to two
Six-Core / Quad-Core AMD Opteron™ 2000
Series processors**
- HT3.0 Link support
|
Chipset |
- AMD chipset SR5690 + SP5100
|
|
|
Memory Capacity |
- Sixteen 240-pin DIMM
sockets
- Support up to 128GB DDR2
800/667/533 MHz memory *
- Dual channel memory bus
- Single or Dual
(recommended) channel memory support
- For Dual CPUs: Recommended
that memory be populated equally in adjacent
memory banks
|
Memory Type |
- DDR2 800/667/533 MHz
Registered ECC SDRAM 72-bit, 240-pin
gold-plated DIMMs
|
DIMM Sizes |
- 256 MB, 512 MB, 1GB, 2GB,
4GB
|
Memory Voltage |
|
|
|
SATA |
- AMD SP5100 (RAID 0, 1, 10)
|
Network Controllers |
- Two Intel® 82574L
controller, Dual-Port
Gigabit Ethernet
- 10/100/1000BASE-T support
|
VGA |
- Matrox G200 16MB DDR2
16MB Graphics & VGA port
|
Super I/O |
|
|
|
SATA |
|
IDE |
- Single EIDE channel support
up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
Floppy |
|
LAN |
|
USB |
- 6x USB 2.0 ports
- 2x Rear / 2x header / 2x
type A
|
VGA |
|
Keyboard / Mouse |
- PS/2 keyboard and mouse
ports
|
Serial Ports |
- 1x Fast UART 16550 serial
port
- 1x serial port header
|
Others |
- 1 SATA DOM power connector
|
|
|
PCI-Express |
- 2x PCI-e 2.0 x16 (x8
signals) slots
- 1x PCI-e 2.0 x8 slot
- 1x PCI-e 2.0 x8 (x4
signals) slot
|
PCI-X |
- 2x PCI-X 64-bit 133/100MHz
slots
|
|
|
|
|
BIOS Type |
- 16Mb SPI Flash ROM with
AMI® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
|
|
Software |
|
Power Configurations |
- ACPI Power Management
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from
Soft-Off
- Power-on mode control for
AC power loss recovery
|
|
|
CPU |
- Monitors CPU Core Voltages,
+1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT,
HT, memory, chipset
- CPU switching voltage
regulator
|
FAN |
- Up to 8-fan status
tachometer monitoring
- Up to eight 4-pin fan
headers
- Status monitor for speed
control
- 3-pin fan support (w/o
speed control)
- Low noise fan speed control
(4-pin fan only)
- Pulse Width Modulated (PWM)
fan connectors
|
Temperature |
- Monitoring for CPU and
chassis environment
- CPU Thermal Trip Support
- I2C Temperature
Sensing Logic
|
LED |
- CPU / System Overheat LED
- +5V Standby Alert LED
|
Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
|
|
RoHS
|
|
Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative
Humidity:
8% to 90% (non-condensing)
- Non-operating Relative
Humidity:
5% to 95% (non-condensing)
|
|
|
FCC |
- Passed to meet FCC standard
requirement
|
|
|
|
|
|
|
|
|
|
|
|
Key Features
1. Two Six-Core / Quad-Core
AMD Opteron™ 2000 Series (Socket
F) support; HT3.0 Link support
2. AMD SR5690 + SP5100 Chipset
3. Up to 128GB Reg. ECC DDR2
800/667/533 SDRAM in 16 DIMM
4. Two Intel® 82574L controllers,
Dual-Port Gigabit Ethernet
5. 6x SATA2 3.0Gbps Ports via
AMD SP5100 controller, RAID 0, 1, 10
6. 2x PCI-e 2.0 x16 (x8 signals),
1x PCI-e 2.0 x8 (x4 signals),
1x PCI-e 2.0 x8,
2x PCI-X 133/100
7. 8x Fans with Speed Control
8. Integrated Matrox G200eW Graphic
|
|
|
|
|
|
|