|
 | | SYS-5015B-MRB | - SuperServer 5015B-MRB (Black)
|
| | |
| | CPU | - Single LGA775 ZIF Socket
- Supports Quad-Core Intel® Xeon® X3300/X3200 series
- Supports Dual-Core Intel® Xeon® E3100/3000 series
- Supports Intel® Xeon® processor L3360 and L3110 series
- Supports Intel® Core™2 Quad Q9000/Q8000/Q6000 series
- Supports Intel® Core™2 Duo E8000/E7000/E6000/E4000 series
- Supports Intel® Pentium® E5000/E2000 series
- Supports Intel® Celeron® E1000 and 400 series
- NOTE: Intel Xeon processor L3014 requires an LGA771 socket and is not supported.
| | System Bus | - 1333 / 1066 / 800 MHz system bus
|
| | |
| | Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of memory (Dual Channel)
| | Memory Type | - DDR2 800/667 MHz unbuffered, ECC SDRAM, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 256 MB, 512 MB, 1 GB, 2GB, 4GB
| | Memory Voltage | |
| | |
| | Chipset | - Intel 3210 chipset
- ICH9R + PXH + Intel® 82573V + Intel® 82573L
| | Serial ATA | - Intel® ICH9R SATA2 (3 Gbps) controller built-in
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support
- SIMSO Slot - Supermicro Intelligement Management
- (Optional: AOC-SIMSO-HTC, AOC-SIMSO+)
- NOTE: AOC-SIMSO+ must use Dedicated LAN for KVM-over-LAN function
| | Network Controllers | - 2x Single-port Gigabit PCI-Express Ethernet Controllers
- Intel® 82573V + Intel® 82573L
- Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
| | VGA | - On-board ATI ES1000 (32MB) graphics
| | Super I/O | | | Clock Generator | |
| | |
| PCI-Express/
PCI-X | - 1 Universal (x8) PCI-E or 1 64 bit PCI-X 133 MHz slot
|
| | |
| | Serial ATA | - Six Serial ATA ports (3 Gbps performance)
- Six SATA hard drives supported
- External SATA supported
| | IDE | - One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB
| | LAN | | | USB | - Up to 8x USB 2.0 / 1.1 compliant ports
- 2 rear ports
- 4 internal headers + 2 on-board
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1x Fast UART 16550 serial port
- 1x internal header
| | Parallel Port | - 1x ECP / EEP Parallel Port
|
| | |
| | BIOS Type | - 16Mb Flash EEPROM with Phoenix BIOS®
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0/2.0
- SMBIOS 2.3
- USB Keyboard support
|
|  | | |
| | Form Factor | | | Model | |
| | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | |
| | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
| | Ports | |
| | |
| | Internal Bay | - 1x 3.5" internal SATA drive bay
|
| | |
| | Fans | |
| | |
| | 200W Low Noise High-Efficiency AC-DC power supply w/ PFC | | AC Voltage | - 100 - 240V, 50-60Hz, 4-2 Amp Max
| | +5V | | | +5V standby | | | +12V | | | -12V | | | +3.3V | | | Certification |  Certified |
| | |
| | CPU | - Monitors for CPU Cores ( +1.8V, +3.3V, +5, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset)
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
- Adjustable CPU clock frequency ratio
| | FAN | - Total of six 4-pin fan headers
- 6x fans with tachometer monitoring
- Status monitor with firmware / software speed control
- Status monitor for on/off control
- Support 3-pin fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- Thermal Monitor (TM2) Support
- PECI
| | LED | - CPU / System Overheat LED
- +5 Standby alert LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| | |
| RoHS
|
 | | Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|