 |
|
SYS-6014P-32 |
- SuperServer 6014P-32 (Beige)
|
| |
|
|
|
CPU |
- Dual 604-pin FC-mPGA4
Sockets
- Supports up to two
Intel® 64-bit Xeon® processor(s) of
the same type below:
-
Xeon Dual
Core (Paxville) CPU
with 2x2MB L2
Integrated Advanced
Transfer Cache
-
Xeon
(Nocona) CPU
with 1MB L2
Integrated Advanced
Transfer Cache, up
to 3.60 GHz
-
Xeon (Irwindale)
CPU with
2MB L2 Integrated
Advanced Transfer
Cache, up to 3.80
GHz
-
Xeon LV (Low
Voltage) CPU,
up to 2.8 GHz
|
|
System Bus |
|
|
Operating System Software |
|
| |
|
|
|
Memory Capacity |
- Eight 240-pin DIMM sockets
- Supports up to 16 GB DDR2
400MHz memory
- Dual-channel memory bus
- Memory must be populated in
pairs
- Single-rank modules are
recommended for 6+ DIMM support
|
|
Memory Type |
- DDR2 400MHz buffered
(registered) ECC SDRAM 72-bit, 240-pin
gold-plated DIMMs
|
|
DIMM Sizes |
|
|
Memory Voltage |
|
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors
(using ECC memory)
- Supports Single Device Data
Correction (SDDC)
|
| |
|
|
|
Chipset |
- Intel® E7520 chipset
- MCH + ICH5R + PXH +82546GB
|
|
SAS |
- Adaptec AIC9410: Adaptec
8-port SAS Controller
- RAID 0, 1, 10, JBOD support
|
|
SAS Zero Channel RAID |
- Support for Zero-Channel
RAID
- Optional Card Not Included
|
|
IPMI |
- Support for Intelligent
Platform Management Interface v.2.0
- (Optional IPMI Card:
AOC-1UIPMI-B)
- 3rd LAN(GbE) port (Optional:
AOC-1UIPMI-LANG) *Must be used
with Optional IPMI Card above.
|
|
Network Controllers |
- Intel® 82546GB Dual Port
Gigabit Controller
- Supports RJ45 output
|
|
Graphics |
- ATI Rage XL SVGA PCI video
controller with 8 MB of video memory
|
|
Super I/O |
|
| |
|
|
|
PCI-Express / PCI-X |
- 1 x Universal (SXB-E) slot
for
[1 (x8) PCI-E Slot] OR
[1x 64-bit PCI-X 100MHz slot]
- 1 x Universal (SXB-E) slot
for
[1 (x8) PCI-E Slot] OR
[1x 64-bit PCI-X 100MHz slot]
- 1 x IPMI 2.0 Slot (For
optional 3rd LAN)
- Supports Full-length add-on
cards
|
| |
|
|
|
SAS |
- Four internal SAS ports
- Four external SAS ports
|
|
IDE |
- Dual EIDE channels support
up to four UDMA/ IDE devices
- Supports UDMA Mode 5, PIO
Mode 4, and ATA/100
|
|
Floppy |
- 1 Floppy controller; 1.44
MB
|
|
LAN |
|
|
USB |
- 2x USB rear ports
- 2x USB internal headers
- USB 2.0 / 1.1 Compliant
|
|
VGA |
|
|
Keyboard / Mouse |
- PS/2 keyboard and mouse
ports
|
|
Serial Ports |
- 2 Fast UART 16550 serial
ports
|
|
 |
|
|
|
|
|
Form Factor |
|
|
Model |
|
| |
|
|
|
Height |
|
|
Width |
|
|
Depth |
|
|
Gross Weight |
|
|
Available Colors |
|
| |
|
|
|
Buttons |
- Power On/Off button
- UID button
|
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail
LED
- UID LED
|
|
Ports |
|
| |
|
|
|
Hot-swap |
- 4x 3.5" Hot-swap SAS / SATA
drive bays
|
| |
|
|
|
Floppy |
|
|
DVD-ROM |
|
| |
|
|
| 1x 1U
SAS / SATA Hard Drive Backplane |
| |
|
|
|
Fans |
|
| |
|
|
|
700W AC-DC power supply and power distributor w/
PFC |
|
AC Input |
- 100 - 240V, 60-50Hz, 10 - 4
Amp
|
|
+5V standby |
|
|
+12V |
|
|
With Power Distributor |
- +5V: 24 Amp
- +3.3V: 21 Amp
- -12V: 0.6 Amp
|
| |
|
|
|
CPU |
- Monitors for CPU Cores,
+1.8V, +3.3V, +5V, ±12V, +3.3V Standby &
VBAT
- CPU Core 4-Phase-switching
voltage regulator with auto-sense
|
|
FAN |
- Total of five proprietary
fan connectors supporting 10 fans
- 10x fans with Tachometer
status monitoring
- Status monitor for speed
control
|
|
Temperature |
- Monitoring for CPU, chassis
environment
- CPU thermal trip support
- Thermal control for 10x fan
connectors
- Thermal Monitor 2 (TM2)
support
|
|
LED |
- CPU / System Overheat LED
|
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC support
|
| |
|
|
|
BIOS Type |
- 8Mb Flash EEPROM with
Phoenix® BIOS
|
|
BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
- Fan Speed Control
|
|