 |
|
SYS-6014P-32RB |
- SuperServer 6014P-32RB (Black)
|
| |
|
|
| CPU |
- Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit
Xeon® processor(s) of the same type below:
-
Xeon Dual
Core (Paxville) CPU
with 2x2MB L2
Integrated Advanced
Transfer Cache
-
Xeon
(Nocona) CPU
with 1MB L2
Integrated Advanced
Transfer Cache, up
to 3.60 GHz
-
Xeon (Irwindale)
CPU with
2MB L2 Integrated
Advanced Transfer
Cache, up to 3.80
GHz
-
Xeon LV (Low
Voltage) CPU,
up to 2.8 GHz
|
| System
Bus |
|
|
Operating System Software |
|
| |
|
|
| Memory
Capacity |
- Eight 240-pin DIMM sockets
- Supports up to 16 GB DDR2 400MHz memory
- Dual-channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+
DIMM support
|
| Memory
Type |
- DDR2 400MHz buffered (registered) ECC SDRAM
72-bit, 240-pin gold-plated DIMMs
|
| DIMM
Sizes |
|
| Memory
Voltage |
|
| Error
Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC
memory)
- Supports Single Device Data Correction (SDDC)
|
| |
|
|
|
Chipset |
- Intel® E7520 chipset
- MCH + ICH5R + PXH +82546GB
|
| SAS |
- Adaptec AIC9410: Adaptec 8-port SAS
Controller
- RAID 0, 1, 10, JBOD support
|
| SAS
Zero Channel RAID |
- Support for Zero-Channel RAID
- Optional Card Not Included
|
| IPMI |
- Support for Intelligent Platform Management
Interface v.2.0
- (Optional IPMI Card:
AOC-1UIPMI-B)
- 3rd LAN(GbE) port (Optional:
AOC-1UIPMI-LANG) *Must be used with Optional
IPMI Card above.
|
|
Network Controllers |
- Intel® 82546GB Dual Port Gigabit Controller
- Supports RJ45 output
|
|
Graphics |
- ATI Rage XL SVGA PCI video controller with
8 MB of video memory
|
| Super
I/O |
|
| |
|
|
|
PCI-Express / PCI-X |
- 1 x Universal (SXB-E) slot for
[1 (x8) PCI-E Slot] OR
[1x 64-bit PCI-X 100MHz slot]
- 1 x Universal (SXB-E) slot for
[1 (x8) PCI-E Slot] OR
[1x 64-bit PCI-X 100MHz slot]
- 1 x IPMI 2.0 Slot (For optional 3rd LAN)
- Supports Full-length add-on cards
|
| |
|
|
| SAS |
- Four internal SAS ports
- Four external SAS ports
|
| IDE |
- Dual EIDE channels support up to four UDMA/
IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and
ATA/100
|
|
Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
|
| USB |
- 2x USB rear ports
- 2x USB internal headers
- USB 2.0 / 1.1 Compliant
|
| VGA |
|
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
|
Serial Ports |
- 2 Fast UART 16550 serial ports
|
|
 |
|
|
|
|
| Form
Factor |
|
| Model |
|
| |
|
|
| Height |
|
| Width |
|
| Depth |
|
| Gross
Weight |
|
|
Available Colors |
|
| |
|
|
|
Buttons |
- Power On/Off button
- UID button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
- UID LED
|
| Ports |
|
| |
|
|
|
Hot-swap |
- 4x 3.5" Hot-swap SAS / SATA drive bays
|
| |
|
|
| Floppy |
|
|
DVD-ROM |
|
| |
|
|
| 1x 1U SAS / SATA Hard
Drive Backplane |
| |
|
|
| Fans |
|
| |
|
|
| 700W (1 + 1)
Redundant AC-DC high-efficiency power supply w/ PFC |
| AC
Voltage |
- 100 - 240V, 60-50Hz, 10 - 4 Amp
|
| +5V
standby |
|
| +12V |
|
| With
Power Distributor |
- +5V: 30 Amp
- +3.3V: 24 Amp
- -12V: 0.6 Amp
|
| |
|
|
| CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V,
±12V, +3.3V Standby & VBAT
- CPU Core 4-Phase-switching voltage
regulator with auto-sense
|
| FAN |
- Total of five proprietary fan connectors
supporting 10 fans
- 10x fans with Tachometer status monitoring
- Status monitor for speed control
|
|
Temperature |
- Monitoring for CPU, chassis environment
- CPU thermal trip support
- Thermal control for 10x fan connectors
- Thermal Monitor 2 (TM2) support
|
| LED |
- CPU / System Overheat LED
|
| Other
Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC support
|
| |
|
|
| BIOS
Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
| BIOS
Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
- Fan Speed Control
|
|