 |
 |
 |
|
|  | | | | |
 | | SYS-1027GR-TRF | - SuperServer 1027GR-TRF (Black)
|
| | |
| | CPU | - Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 130W TDP)
| | Note | † BIOS version 3.0 or above is required | | Cache | | | System Bus | |
| GPU/Xeon Phi Support | - M2090, up to 130W CPU at 30°C
- M2075, up to 130W CPU at 35°C
- K10/K20/K20X/K1/K2 (Kepler), up to 130W CPU at 30°C
- Xeon Phi, up to 130W CPU at 30°C
|
| | |
| | Memory Capacity | - 8x 240-pin DDR3 DIMM sockets
- Up to 512GB DDR3 ECC LRDIMM
- Up to 256GB DDR3 ECC Registered memory (RDIMM)
- Up to 48GB DDR3 ECC and non-ECC UDIMM
| | Memory Type | - 1866/1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors
(using ECC memory)
|
| | |
| | Chipset | | | SATA | - SATA 2.0 3Gbps with RAID 0, 1, 5, 10
- SATA 3.0 6Gbps with RAID 0, 1
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| | Network Controllers | - Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Graphics | |
| | |
| | SATA | - 2 SATA 3.0 ports (6Gbps)
- 2 SATA 2.0 ports (3Gbps)
| | LAN | - 2 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 Dedicated IPMI LAN port
| | USB | | | Video | | | Keyboard/Mouse | - 1 PS/2 Keyboard/Mouse port
| | Serial Port | |
| | |
| | BIOS Type | - 128Mb SPI Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
- UEFI
- RTC (Real Time Clock) Wakeup
|
| | | |
| | Form Factor | | | Model | |
| | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Color | |
| | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED /
UID LED
|
| | |
| | PCI-Express | |
| | |
| | Hot-swap | - 4x 2.5" Hot-swap drive bays
|
| | | |
| | Fans | - 10x counter-rotating fans with optimal fan speed control
|
| | |
| | 1800W (1+1) Redundant 1800W power supply with PMBus | | AC Input | - 1000W Output @ 100-120V, 12-10A, 50-60Hz
- 1200W Output @ 120-140V, 12-10A, 50-60Hz
- 1800W Output @ 200-240V, 10-8.5A, 50-60Hz
| | DC Output | - 1000W: +12V/84A; +5Vsb/4A
- 1200W: +12V/100A; +5Vsb/4A
- 1800W: +12V/150A; +5Vsb/4A
| | Certification |   Platinum Certified
|
| | |
| | CPU | - Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
- CPU Core 6-Phase-switching voltage regulator
| | FAN | - Total of ten 4-pin PWM fans
- 10x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 10x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
| | LED | - Power Fail / Overheat LED
- Suspend-state Indicator LED
- UID LED
| | Other Features | |
| | |
| RoHS
| | | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
| | |
| | | Part Number | Qty | Description | | Motherboard / Chassis | MBD-X9DRG-HF
CSE-118GQ-R1800B | 1
1 | Super X9DRG-HF Motherboard
1U Black SC118GQ Chassis | | Air Shroud | MCP-310-11802-0N | 1 | Air Shroud for X9DRG used in SC118GQ-R1800B | | Backplane | BPN-SAS-118G-4 | 1 | SAS-118G-4; supports 4X2.5" SATA HDD, | | Cable 1 | CBL-0157L-02 | 1 | 8 pin to 8 pin ribbon SGPIO cable with tube, 27cm, PBF | | Cable 2 | CBL-0207L | 1 | 59CM SATA ROUND S-S PBF.26AWG | | Cable 3 | CBL-0227L | 1 | 48CM SATA ROUND S-RA PBF.26AWG | | Cable 4 | CBL-0228L | 2 | 55CM SATA ROUND S-RA PBF 26AWG | | Cable 5 | CBL-0296L | 5 | 4 pin to 4 pin fan extension cord, for PWM fan. 23cm. 24AWG | | Cable 6 | CBL-0333L | 3 | 6+2 pin to 8 pin GPU power extension from MB, 30cm. 18/20AWG | | Cable 7 | CBL-0460L | 1 | 8 Pin to Two 4 Pin Backplane Power Ext. 28/22cm. 18AWG | | Riser Card | RSC-R1UG-E16A-X9 | 1 | RSC-R1UG-E16A-X9-O-P | | Riser Card | RSC-R1UG-E16AR-X9 | 1 | A Right Hand Side Riser Card with PCI-E x16 | | Riser Card | RSC-R1UG-E16B-X9 | 1 | RSC-R1UG-E16B-X9-O-P | | Riser Card | RSC-R1UG-E16R-X9 | 1 | A 1U Right Hand Side Riser Card with PCI-E x16 | | Heatsink / Retention | SNK-P0047PS | 1 | 1U Passive CPU Heat Sink for X9 Generation Motherboards w/ Narrow ILM | | Heatsink / Retention | SNK-P0047PSC | 1 | 1U Passive Front CPU Heat Sink for X9DRG-HF 1U GPU Server | | Power Supply | PWS-1K81P-1R | 2 | 1800W Platinum Redundant Single Output | | Cable 8 | CBL-0160L | 2 | NEMA5-15P to C13 US power cord 16AWG 6ft, PBF (default for high watt) | | Fan 1 | FAN-0141L4 | 10 | 40x40x56 mm 20.5K RPM / 17.6K RPM Counter-rotating Fan | | Drive Tray(s) | MCP-220-00047-0B | 4 | Black gen 3rd hot-swap 2.5inch HDD tray | | Mounting Rails | MCP-290-00054-0N | 1 set | Rail set, quick/quick, optional for 1U 17.2 |
|
|
|
|
|
 |
|
 |
|
Key Features
Key Features
1. Dual socket R (LGA 2011) supports
Intel® Xeon® processor E5-2600
and E5-2600 v2 family†2. Up to 512GB ECC DDR3, up to
1866MHz; 8x DIMM sockets3. 3x PCI-E 3.0 x16 slots
(support GPU/Xeon Phi cards),
1x PCI-E 3.0 x8 (in x16) low-profile slot4. Integrated IPMI 2.0 with KVM and
Dedicated LAN5. Intel® i350 Dual-Port GbE Controller6. 4x Hot-swap 2.5" SATA Drive Bays7. 1800W Redundant Power Supplies
Platinum Level (94%+)8. 10x Counter rotating fans w/ optimal
fan speed control9. Smart server management tools
| |
|
|
|
|
|
|
|