 |
 |
 |
|
 | | |
 | | SYS-F627R3-F72PT+ | - SuperServer F627R3-F72PT+ (Black)
|
| | |
| | CPU | - Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 135W TDP *)
* Please contact your Supermicro sales representative for additional details | | Note | † BIOS version 3.0 or above is required | | Cache | | | System Bus | |
| | |
| | Memory Capacity | - 16x 240-pin DDR3 DIMM sockets
- Up to 1TB DDR3 ECC LRDIMM
- Up to 512GB DDR3 ECC Registered memory (RDIMM)
- Up to 128GB DDR3 ECC Un-Buffered memory (UDIMM)
| | Memory Type | - 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| | |
| | Chipset | | | AHCI SATA | - SATA 2.0 3Gbps with RAID 0, 1, 5, 10
- SATA 3.0 6Gbps with RAID 0, 1
| |
| SAS | - SAS2 (6Gbps) via LSI 2208
- HW RAID 0, 1, 5, 6, 10, 50, 60 support
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| | Network Controllers | - Intel® X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201F PHY (dedicated IPMI)
| | Graphics | |
| | |
| |
| SAS | | | LAN | - 2x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | | | VGA | | | Serial Port / Header | |
| | | |
| | Form Factor | | | Model | |
| | |
| | Width | | | Height | | | Depth | | | Weight | - Net Weight: 105 lbs (47.63 kg)
- Gross Weight: 150 lbs (68.04 kg)
| | Available Colors | |
| | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
|
| | |
| | PCI-Express | - 1x PCI-E 3.0 x16 (LP)
- 1x PCI-E 3.0 x8 (LP)
- 1x PCI-E 2.0 x4 (LP)
|
| | |
| | Hot-swap | - 2x 3.5" Hot-swap SAS/SATA HDD trays
|
| | |
| | 1x SAS2 / SATA backplane |
| | |
| | Fans | - 8x 8cm heavy duty fans with air shroud and PWM fan speed control
|
| | |
| | 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 | | AC Input | - 1000W Output @ 100-140V, 12-8A, 50-60Hz
- 1280W Output @ 180-240V, 8-6A, 50-60Hz
| | DC Output | - 1000W: +12V/83A; +5Vsb/4A
- 1280W: +12V/106.7A, +5Vsb/4A
| | Certification |  
Platinum Certified
[ Test Report ] |
| | |
| | BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
| | BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| | |
| RoHS
| | | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
|
 |
|
 |
|
Key Features
Key Features
4 Hot-plug System Nodes in 4U
Front I/O. Each node supports:
1. Dual socket R (LGA 2011) supports
Intel® Xeon® processor E5-2600
and E5-2600 v2 family†2. Up to 1TB ECC DDR3, up to
1866MHz; 16x DIMM sockets3. 1 PCI-E 3.0 x16 (LP), 1 PCI-E 3.0 x8
(LP) and 1 PCI-E 2.0 x4 (LP)4. Front I/O ports: Dual 10GBase-T,
2 USB 2.0, and 1 VGA connector5. Built-in Server management tool
(IPMI 2.0, KVM/media over LAN) with
dedicated LAN port6. 2x 3.5" Hot-swap SAS/SATA HDDs;
SAS2 via LSI 22087. 1280W Redundant Power Supplies
Platinum Level (95%)
|
|
|
|
|
|
|