 |
|
MBD-H8QG6+-F |
- H8QG6+-F (Standard Retail
Pack)
|
| |
|
|
|
Form Factor |
|
|
Dimensions |
- 16.48" x 13" (41.9cm x
33.0cm)
|
| |
|
|
|
CPU |
- Quad 1944-pin Socket G34
- Supports up to four
16/12/8/4-Core ready AMD Opteron™ 6000
Series processors
- HT3.0 Link support
|
| Chipset |
- AMD SR5690 + SP5100 Chipset
|
| |
|
|
|
Memory Capacity |
- 32 DIMM sockets
- Supports up to 1TB
Registered ECC or 256GB Unbuffered
ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 32
DIMMs
- Quad channel memory bus
- For Dual or Quad CPUs:
Recommended that memory be populated equally
in adjacent memory banks
-
See Detailed Memory Support Matrix
|
|
Memory Type |
- Registered ECC or unb. ECC
/ non-ECC DDR3 1600/1333/1066 MHz SDRAM
72-bit, 240-pin gold-plated DIMMs
|
|
DIMM Sizes |
- 1GB, 2GB, 4GB, 8GB, 16GB,
32GB
|
|
Memory Voltage |
|
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors
(using ECC memory)
|
| |
|
|
|
SATA |
- AMD SP5100 (RAID 0, 1, 10)
|
|
SAS |
- LSI 2008 8 port SAS
controller
- RAID 0, 1, 10; RAID 5
Optional
- Optional:
AOC-SAS2-RAID5-KEY
RAID 5 support
|
|
IPMI |
- Support for Intelligent
Platform Management Interface v.2.0
- IPMI 2.0 with virtual media
over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
|
Network Controllers |
- Intel® 82576 controller,
Dual-Port
Gigabit Ethernet
- 10/100/1000BASE-T support
|
|
VGA |
- Matrox G200 16MB DDR2
graphics
|
|
Super I/O |
|
| |
|
|
|
SATA |
|
|
SAS |
- Integrated LSI 2008 SAS2
Controller
- Eight Serial Attached SCSI
(SAS) ports
|
|
LAN |
- 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN
supports IPMI
|
|
USB |
- 7x USB 2.0 ports
- 2x Rear, 4x internal
header, and 1x type A
|
|
VGA |
|
|
Keyboard / Mouse |
- PS/2 keyboard and mouse
ports
|
|
Serial Ports |
- 1x Fast UART 16550 serial
port
- 1x serial port header
|
|
Others |
- 1 SATA DOM power connector,
TPM header
|
| |
|
|
|
PCI-Express |
|
|
 |
|
|
|
|
|
1U Chassis |
|
|
2U Chassis |
-
CSE-828TQ+-R1400LPB
Requires rev. K
chassis, air shroud MCP-310-82801-0N*
- CSE-828TQ+-R1K43LPB
Requires rev. K
chassis, air shroud MCP-310-82801-0N*
|
|
Tower / 4U Rackmount |
|
|
Note |
- * Sold separately, please
refer to the chassis web spec for the air
shroud info in the optional part list.
|
| |
|
|
|
BIOS Type |
- 16Mb SPI Flash ROM with
AMI® BIOS
|
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
| |
|
|
|
Software |
|
|
Power Configurations |
- ACPI Power Management
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from
Soft-Off
- Power-on mode control for
AC power loss recovery
|
| |
|
|
|
CPU |
- Monitors CPU Core Voltages,
+1.8V, +3.3V, +5V, ±12V, +3.3V Standby, -12V
Standby, VBAT, HT, memory, chipset
- CPU switching voltage
regulator
|
|
FAN |
- Up to 9-fan status
tachometer monitoring
- Up to nine 4-pin fan
headers
- Status monitor for speed
control
- 3-pin fan support (w/o
speed control)
- Low noise fan speed control
(4-pin fan only)
- Pulse Width Modulated (PWM)
fan connectors
|
|
Temperature |
- Monitoring for CPU and
chassis environment
- CPU Thermal Trip Support
- Thermal control for 9x fan
connectors
- I2C Temperature
Sensing Logic
|
|
LED |
- CPU / System Overheat LED
- +5V Standby Alert LED
|
|
Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
|
|
RoHS
|
|
|
Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative
Humidity:
8% to 90% (non-condensing)
- Non-operating Relative
Humidity:
5% to 95% (non-condensing)
|
| |
|
|
|
FCC |
- Passed to meet FCC standard
requirement
|
|