|
|
|
|
SYS-6046T-TUF
|
SuperServer 6046T-TUF (Black)
|
CPU
|
Dual 1366-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
Intel®
Xeon®Processor 5600 Series (Westmere)
Intel®
Xeon®Processor 5500 Series (Nehalem-EP)
|
QPI
|
up to 6.4 GT/s
|
Memory Capacity
|
12x 240-pin DIMM sockets
Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
Memory Mirroring supported
|
Memory Type
|
1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes
|
1GB, 2GB, 4GB , 8GB , 16GB
|
Memory Voltage
|
1.5 V, 1.35 V
|
Error Detection
|
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
Chipset
|
Intel® 5520 (Tylersburg) chipset
ICH10R + IOH-36D
|
SATA
|
Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 10 support (Linux)
|
IPMI
|
Support for Intelligent Platform Management Interface v.2.0
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
|
Network Controllers
|
2x Intel® 82574L Gigabit Ethernet Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics
|
Matrox G200eW 16 MB DDR2
|
Super I/O
|
Winbond 83827HF chip
|
SATA
|
Six Serial ATA ports
Six SATA hard drives supported
|
LAN
|
2x RJ45 LAN ports
1x RJ45 Dedicated IPMI LAN port
|
USB
|
4x USB rear ports
2x USB on-board (TypeA)
4x USB internal headers
Total 8 USB 2.0 Compliant
|
VGA
|
1x VGA Port
|
Keyboard / Mouse
|
PS/2 keyboard and mouse ports
|
Serial Port / Header
|
1 Fast UART 16550 serial port
1 Fast UART 16550 serial header (Option)
|
Floppy
|
1 Floppy controller; 1.44 MB
|
BIOS Type
|
32Mb SPI Flash EEPROM with AMI® BIOS
Legacy BIOS by default
|
BIOS Features
|
Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support
|
Form Factor
|
4U Rackmount
|
Model
|
CSE-842TQ-865B
|
Height
|
7" (178mm)
|
Width
|
17.2" (437mm)
|
Depth
|
20.5" (521mm)
|
Weight
|
35 lbs (15.9 kg)
|
Available Colors
|
Black
|
Buttons
|
Power On/Off button
System Reset button
|
LEDs
|
Power status LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED
Power fail LED
|
Ports
|
2x USB ports, 1x COM port
|
PCI-Express
|
4 (x8) PCI-E 2.0 slots
1 (x4) PCI-E 2.0 slot
1 (x4) PCI-E slot
|
Hot-swap
|
5x 3.5" (8x 2.5" optional kits; SATA Hot-swap Drive Bays)
Enterprise SATA HDD only recommended
|
Peripheral Bay(s)
|
3x 5.25" Peripheral Drive Bays
1x Slim DVD-ROM (optional) Drive Bay
|
|
SAS / SATA Hard Drive Backplane
|
Fans
|
1x Front Intake 9cm PWM cooling fan
2x Rear 8cm PWM cooling fans
|
|
865W AC power supply (cooling-redundant) w/ PFC
|
AC Voltage
|
100 - 240V, 50-60Hz, 12-6 Amp
|
+5V standby
|
6.5 Amp
|
+12V
|
70 Amp
|
+5V
|
30 Amp
|
+3.3V
|
30 Amp
|
-12V
|
1 Amp
|
Certification
|
80 Plus Platinum
|
CPU
|
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
6-Phase-switching voltage regulator
|
Fan
|
Total of eight fan headers supporting up to 8 fans
Eight 4-pin fan headers
8x fans with tachometer status monitoring
Support 3-pin fans (w/o speed control)
Low noise fan speed control
|
Temperature
|
Monitoring for CPU and chassis environment
Thermal Control for 8x fan connectors
PECI
|
Other Features
|
Chassis intrusion detection
Chassis intrusion header
|
Operating Environment / Compliance
|
RoHS
|
RoHS Compliant
|
Environmental Spec.
|
Operating Temperature: 10°C to 35°C (50°F to 95°F)
Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)
|
Electronic Design
|
"...The name (Supermicro) has been synonymous with top notch quality and cutting edge performance. Not surprisingly it earned Electronic Design's Best of 2010 Award for its 4U SuperServer 6046T-TUF..."
|
|
Part Number
|
QTY
|
Description
|
Motherboard
|
MBD-X8DTE-F
|
1
|
Super X8DTE-F Motherboard
|
Chassis
|
CSE-842TQ-865B
|
1
|
4U Chassis
|
Backplane
|
BPN-SAS-842TQ
|
1
|
4U SC842 5x3.5inch Hotswap SAS/SATA with SES2
|
Cable 1
|
CBL-0044L
|
5
|
SATA CABLE 61CM FLAT S-S PBF. 26AWG flat
|
Cable 2
|
CBL-0157L
|
2
|
8 pin to 8 pin ribbon SGPIO cable with tube , 40cm, PBF
|
CD
|
CDR-X8
|
1
|
For X8 series
|
Power Supply
|
PWS-865-PQ
|
1
|
865W PS2 POWER SUPPLY W/2 8CM FANS
|
Cable 3
|
CBL-0084L
|
1
|
Front control cable 16 pin split, 6
|
Cable 4
|
CBL-0087
|
1
|
Front Control Cable Round 16 pin to 16 pin Ribbon 20
|
Cable 5
|
CBL-0286L
|
2
|
4 to 4 pin rear fan pwr ext w/ square header, 30cm (PWM). 24AWG
|
Cable 6
|
CBL-0336L
|
1
|
4 pin to 4 pin MIDDLE FAN POWER EXTENSION (PWM) 57CM,24AWG
|
Fan 1
|
FAN-0082L4
|
2
|
80x80x38 mm 4-pin PWM Fan Assembly for SC743, SC745
|
Fan 2
|
FAN-0097L4
|
1
|
92x92x38 mm, 5K RPM, 4-pin PWM w/ Housing for SC842
|
|
Part Number
|
QTY
|
Description
|
Fan Accessory
|
MCP-320-84201-0N
|
--
|
Middle Fan Module Assembly for SC842
|
Front Bezel
|
MCP-210-84201-0B
|
--
|
Black 4U Plastic Front Bezel Assembly for SC842
|
Heatsink
|
SNK-P0040AP4
|
--
|
4U+ ACTIVE CPU HS FOR SC743 W/ X8 DP WS MB
|
Mounting Rails
|
MCP-290-00057-0N
|
--
|
Quick release rail (extendable 26.5" to 36.4")
|
Mounting Rails
|
MCP-290-00058-0N
|
--
|
Quick release rail (extendable 19" to 26.6")
|
Parts
|
MCP-420-84202-0N
|
--
|
Add-On Card Holder (7 Slots) for SC842
|
|
|
|
|
|
|
|
Key Features
- Intel® Xeon® processor 5600/5500
series, with QPI up to 6.4 GT/s
- Intel® 5520 (Tylersburg) Chipset
- Up to 192GB DDR3 1333/1066/800MHz
Reg. ECC DIMM / 48GB Unbuf. DIMM
- Dual Intel® 82574L GbE Controller
- 5x Hot-swap 3.5" SATA HDD; 3x 5.25"
Peripheral bays; opt. Slim DVD drive
- 4 (x8) PCI-E 2.0, 1 (x4) PCI-E 2.0
and 1 (x4) PCI-E slot
- Integrated Matrox G200eW Graphics
- Integrated IPMI 2.0 with Dedicated LAN
- 865W High-efficiency Power Supply
|
|
|
|
|
|
|