 |
 |
 |
|
|
 | | SYS-7045A-C3B | - SuperServer 7045A-C3B (Black)
|
| | |
| | CPU | - Dual 771-pin LGA Sockets
- Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor
5400/5300 sequence (Harpertown
/Clovertown processor)
up to 3.16 GHz - Dual-Core Intel®
Xeon®Processor
5200/5100 sequence (Wolfdale/Woodcrest processor)up to 3.40 GHz
| | System Bus | - 1333 / 1066 MHz system bus
| | Operating System Software | - Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
| | |
| | Memory Capacity | - Six 240-pin DIMM sockets
- Supports up to 48GB 667/533MHz DDR2 ECC Register memory
- Memory must be populated in pairs
| | Memory Type | - 667/533MHz Register DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 512MB, 1GB, 2GB, 4GB, 8GB**
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| | |
| | Chipset | - Intel® 5100 (San Clemente) chipset
- Intel® ICH9R + PXH-V
| | SAS | - LSI SAS1068E
- RAID 0, 1, 10 support
- (Optional: AOC-IButton68) RAID 5 support
| | SATA | - Intel ICH9R SB SATAII Controller
- RAID 0, 1, 5, 10 support (Windows only)
- RAID 0, 1, 10 support (Linux)
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMLP)
- (Optional: AOC-SIMLP-B)
- (Optional: AOC-SIMLP-3) with 3rd LAN support
- NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot
| | Network Controllers | - Intel® Dual 82573V/L Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
| | Audio | - High Definition 7.1 Channel Audio
| | Super I/O | | | Clock Generator | |
| | |
| | PCI-Express | - 1 (x16) PCI-e slot
- 1 (x4) PCI-e (using x16) slot
| | PCI-X | - 2x 64-bit 133/100MHz PCI-X (3.3V) slots
| | PCI | - 2x 32-bit 33MHz PCI (5V) slots
|
| | |
| | SAS | | | Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
| | IDE | - Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | LAN | | | USB | - 4x USB rear ports
- 6x USB internal header
- 10 total USB ports, 2.0 Compliant
| | Audio | - High Definition 7.1 Channel Audio
- Line-in / Line-out / Microphone Ports
| | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Header
| | Parallel Port | - 1x ECP / EEP Parallel Port
|
|  | | |
| | Form Factor | - 4U Rackmountable / Tower
- Optional Rackmount Kit (CSE-PT26)
| | Model | |
| | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | |
| | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
| | Ports | |
| | |
| | Hot-swap | | | Peripheral Bay(s) [90oRotatable] | - 3x 5.25" Peripheral Drive Bays
|
| | |
| | SC743 SAS / SATA Backplane w/ Enclosure Management |
| | |
| | Fans | - 2x 8cm Hot-swappable PWM Cooling Fans
- 1x 9cm Hot-Swappable Rear Exhaust PWM Fan
- 2x Active heatsink w/ heatpipe
|
| | |
| | 865W AC power supply (cooling-redundant) w/ PFC | | AC Voltage | - 100 - 240V, 50-60Hz, 12-6 Amp
| | +5V standby | | | +12V | | | +5V | | | +3.3V | | | -12V | | | Certification |  Certified |
| | |
| | CPU | - Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset
- CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
| | FAN | - Eight 4-pin fans
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support for 3-pins
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
| | LED | - CPU / System Overheat LED
- Suspend-state Indicator LED
- +5V Standby alert LED
| | Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
- SDDC Support
|
| | |
RoHS
|
 | | Environmental Spec. | - Operating Temperature: 10° to 35°C (50° to 95°F)
- Non-operating Temperature: -40° to 70°C (-40° to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
| | |
| | BIOS Type | - 8Mb Flash EEPROM with Phoenix ® BIOS
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- ACPI 1.0 (limited)
- USB Keyboard support
- Hardware BIOS Virus protection
|
|
|
| | | Part Number | Qty | Description | | Motherboard / Chassis | MBD-X7DCA-3-O-P
CSE-743TQ-865-SQB | 1
1 | Super X7DCA-3 Motherboard
4U SC743TQ-865-SQ Chassis | | Backplane | CSE-SAS-743TQ | 1 | SC743 SAS / SATA Backplane [ Manual ] | | Bezel Filter | - | 1 | Front Bezel Filter | | Cable(s) | CBL-0112L
CBL-0119L-02
CBL-0087
CBL-0140L
CBL-0216LCBL-0160L | 1
2
1
1
41 | Round Floppy Cable
79536-3230,13CM IPASS TO 4 SATA,PB FREE
Front Panel Ribbon Cable
50cm DVD-ROM IDE Cable
4 TO 4 PIN FAN POWER CABLE, 210MMUS POWER CORD 16AWG, PB FREE | | CD | CDR-X7 | 1 | Driver CD | | Drive Tray(s) | CSE-PT17B | 8 | 1" SCA drive tray | | Fan(s) | FAN-0103L4
FAN-0104L4 | 1
2 | 92x25 4Pin PWM Fan
80x25,4 Pin PWM Fan | | Heatsink / Retention | SNK-P0034AP4 | 2 | Please refer to our Thermal Components Matrix | | I/O Shield | MCP-260-74301-ON | 1 | Color Mylar I/O Shield | | Manual(s) | MNL-1010 | 1 | SW7045A-C3/CT User's Manual | | Power Supply | PWS-865-PQ | 1 | 865W Low-Noise Power Supply |
|
| | | |
| | | Part Number | Qty | Description | | IPMI | AOC-SIMLP-3
AOC-SIMLP-B | -
-
| IPMI 2.0 w/ Virtual Media Over LAN, Dedicated LAN, & 3rd Data LAN PortIPMI 2.0 w/ Virtual Media Over LAN & Dedicated LAN | | Mounting Rails | CSE-PT26-B | - | Chassis Mounting Rails (Black) |
|
|
|
|
|
 |
|
 |
|
Key Features
1. Dual Intel® 64-bit Xeon® Quad-Core or
Dual-Core, with 1333 / 1066 MHz FSB2. Up to 48GB 667/533MHZ DDR2 ECC
Register SDRAM3. 1 (x16) PCI-e,
1 (x4) PCI-e (using x16 slot),
2x PCI-X 133/100MHz,
2x PCI 33MHz slots4. Intel® Dual 82573V/L Gigabit
Ethernet Controller5. LSI 1068E 8-Port SAS Controller;
RAID 0, 1, 106. 8 x 3.5" hot-swap SAS/ SATA
Drive Bays7. 865W Low-Noise High Efficiency
Power Supply8. Tower or Rackmount9. PWM Fan Speed Control
|
|
|
|
|
|
|