|
|
|
|
|
| SYS-7045A-WTB | - SuperServer 7045A-WTB (Black)
|
| |
| CPU | - Dual 771-pin LGA Sockets
- Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor 5400/5300LV sequence (Harpertown /Clovertown processor) up to 3.20 GHz - Dual-Core Intel®
Xeon®Processor 5200/5100LV sequence (Wolfdale/Woodcrest processor)up to 3.40 GHz
| System Bus | - 1600 / 1333 / 1066 MHz system bus
|
| |
| Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 64 GB 800 / 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Sparing supported
| Memory Type | - 800 / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes | - 512 MB, 1GB, 2GB, 4GB , 8GB**
| Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
| Chipset | - Intel® 5400 (Seaburg) chipset
- ESB2
| SATA | - Intel ESB2 SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows only)
| IPMI | | Network Controllers | - Intel® 82575EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
| Super I/O | | Audio | - ALC 883 High Definition 7.1 Channel Audio
|
| |
| PCI-Express | - 2 (x16) PCI-e (Gen 2.0) slots
| PCI-X | - 2x 64-bit 133MHz PCI-X (3.3V) slots
| PCI | | UIO | |
| |
| Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
| IDE | - Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
- Compact Flash (40-pin connector, IDE 1, single channel) slot
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| LAN | | USB | - 4x USB rear ports
- 1x USB internal header
- Total 5 USB 2.0 Compliant / 1.1 Compliant
| Audio | - High Definition 7.1 Channel Audio
- Line-in / Line-out / Microphone Ports
| Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Serial header
| Parallel Port | - 1 ECP / EEP parallel port
|
| |
| BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
|
| | | |
| Form Factor | - 4U Rackmountable / Tower
- Optional Rackmount Kit (CSE-PT26)
| Model | |
| |
| Height | | Width | | Depth | | Gross Weight | | Available Colors | |
| |
| Buttons | - Power On/Off button
- System Reset button
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
| Ports | |
| |
| Hot-swap | | Peripheral Bay(s) [90oRotatable] | - 3x 5.25" Peripheral Drive Bays
|
| |
| SC743 SAS / SATA Backplane w/ Enclosure Management |
| |
| Fans | - 2x 8cm Hot-swappable PWM Cooling Fans
- 1x 9cm Hot-Swappable Rear Exhaust PWM Fan
- 2x Active heatsink w/ heatpipe
|
| |
| 865W AC power supply (cooling-redundant) w/ PFC | AC Voltage | - 100 - 240V, 50-60Hz, 12-6 Amp
| +5V standby | | +12V | | +5V | | +3.3V | | -12V | | Certification | Certified |
| |
| CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
| FAN | - Total of eight 4-pin fan headers supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- PC temperature sensing logic
- PECI
- Thermal Monitor 2 (TM2) support
| LED | - CPU / System Overheat LED
- Suspend-state indicator LED
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
|
| |
RoHS
|
| Environmental Spec. | - Operating Temperature: 10° to 35°C (50° to 95°F)
- Non-operating Temperature: -40° to 70°C (-40° to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
| | Part Number | Qty | Description | Motherboard / Chassis | MBD-X7DWA-N CSE-743TQ-865B | 2 1 | Super X7DWA-N Motherboard 1U Chassis | Backplane | CSE-SAS-743TQ | 1 | 743 SAS BACKPLANE W/AMI MG9072 | Cable 1 | CBL-0061L | 6 | 35CM, SATA CABLE, PB FREE, 26AWG, flat | Cable 2 | CBL-0139L | 1 | IDE 80-WIRE CABLE FOR DVD ROM, 50 CM, 30AWG | Cable 3 | CBL-0157L | 2 | 8 pin to 8 pin ribbon SGPIO cable with tube , 40cm, PBF | Cable 4 | CBL-0173L | 1 | INTERNAL 10 pin TO EXTERNAL 6 pin FOR 1394 CONNECTOR, 30cm. 26AWG | Cable 5 | CBL-040L | 1 | Round floppy cable 52cm for SC733,822,823 | CD | CDR-X7 | 1 | FOR X7 SERIES MB | |
Heatsink / Retention | SNK-P0034AP4 | 2 | 4U+ ACTIVE CPU HS FOR SC743 W/ X7 DP WS MB | Power Supply | PWS-865-PQ | 1 | 865W PS2 POWER SUPPLY W/2 8CM FANS | Cable 6 | CBL-0084 | 1 | Front control cable 16 pin split, 6\", (converter head), 26AWG | Cable 7 | CBL-0087 | 1 | Front Control Cable Round 16 pin to 16 pin Ribbon 20 | Cable 8 | CBL-0160L | 1 | NEMA5-15P to C13 US power cord 16AWG 6ft, PBF (default for high watt) | Cable 9 | CBL-0216L | 4 | 4 PIN TO 4 PIN MIDDLE FAN POWER EXTENSION, 20cm. 24AWG(PWM) | |
Fan 1 | FAN-0103L4 | 1 | 92x25 4Pin PWM Fan assembly for SC743 Super Quiet rear fan | Fan 2 | FAN-0104L4 | 2 | 80x25,4 Pin PWM fan assem. for SC743 Super Quiet chassis fan | Drive Tray(s) | MCP-220-00092-0B | 8 | Black Hot-swap 3.5inch HDD Tray (w/o logo) | |
Air Shroud | MCP-310-74301-0N | 1 | Air Shroud | Bezel Filter | - | 1 | Front Bezel Filter | Drive Tray(s) | CSE-PT17-B | 8 | 1" Black SCA Drive Tray | Fan(s) | FAN-0104L4 FAN-0103L4 | 2 1 | 80x25,4 Pin PWM Fan 92x25 4Pin PWM Fan | I/O Shield | CSE-PT57L | 1 | Color Mylar I/O Shield | Manual(s) | MNL-0993 | 1 | SW7045A-WT User's Manual |
|
| | | |
| | Part Number | Qty | Description | IPMI | AOC-SIMLP-3(+)AOC-SIMLP-B(+) | -- | IPMI 2.0 w/ Virtual Media Over LAN, Dedicated LAN, & 3rd Data LAN Port IPMI 2.0 w/ Virtual Media Over LAN & Dedicated LAN | Mounting Rails | CSE-PT26 | - | Chassis Mounting Rails | UIO Controller Card(s) | - | - | Please refer to our UIO Add-on Card Table |
|
|
| |
|
|
|
|
|
|
|
Key Features
1. Dual Intel® 64-bit Xeon® Quad-Core or Dual-Core, with 1600 / 1333 / 1066 MHz FSB2. Up to 64GB DDR2 800 / 667 / 533 SDRAM Fully Buffered DIMM (FB-DIMM)3. 2 (x16) PCI-Express 2.0, 2x 64-bit 133MHz PCI-X, 2x 32-bit PCI, 1x UIO Slots4. Intel® 82575EB Dual-port Gigabit Ethernet Controller5. 8 x 3.5" Hot-swap Drives Trays 6x SATA Hard Drives Supported6. 865W Low-Noise Power Supply7. Tower or Rackmount8. PWM Fan Speed Control
|
|
|
|
|
|
|