 |
 |
 |
|
|
 | | SuperWorkstation | |
| | |
| | CPU | - Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel®
Xeon®Processor 5600 Series (Westmere) - Intel®
Xeon®Processor 5500 Series (Nehalem-EP)
| | QPI | |
| | |
| | Memory Capacity | - 12x 240-pin DIMM sockets
- Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
| | Memory Type | - 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 1GB, 2GB, 4GB , 8GB , 16GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| | |
| | Chipset | - Intel® 5520 (Tylersburg) chipset
- ICH10R + IOH-36D
| | SATA | - Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0 / 1.5
- 200-pin IPMI slot (SIMLC)
- (Optional: AOC-SIMLC)
| | Network Controllers | - Intel® 82573V & 82573L Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Audio | - Realtek ALC883 7.1 HD audio
| | Super I/O | |
| | |
| | PCI-Express | - 2 (x16) PCI-E 2.0 slots
- 1 (x4) PCI-E (in x8 slot)
| | PCI | |
| | |
| | Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
| | Floppy | - 1 Floppy controller; 1.44 MB
| | LAN | | | USB | - 4x USB rear ports
- 2x USB on-board
- 4x USB internal headers
- Total 10 USB 2.0 Compliant
| | Audio | - Realtek ALC883 7.1 HD audio
| | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Port | - 2 Fast UART 16550 serial ports
|
| | |
| | BIOS Type | - 32Mb SPI Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|  | | |
| | Form Factor | - 4U Rackmountable / Tower
- Optional Rackmount Kit (CSE-PT26)
| | Model | |
| | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | |
| | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
| | Ports | |
| | |
| | Hot-swap | - 8x SAS / SATA Hot-swap Drive Bays
| | Peripheral Bay(s) [90oRotatable] | - 2x 5.25" Peripheral Drive Bays
- 1x 5.25" Bay for Floppy Drive
|
| | |
| | SC743 SAS / SATA Backplane w/ Enclosure Management |
| | |
| | Fans | - 2x 8cm Hot-swappable PWM Cooling Fans
- 1x 9cm Rear Exhaust PWM Fan
- 2x Active heatsink w/ heatpipe
|
| | |
| | 865W AC power supply (cooling-redundant) w/ PFC | | AC Voltage | - 100 - 240V, 50-60Hz, 12-6 Amp
| | +5V standby | | | +12V | | | +5V | | | +3.3V | | | -12V | | | Certification |  Certified |
| | |
| | CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
| | FAN | - Total of eight fan headers supporting up to 8 fans
- Eight 4-pin fan headers
- 8x fans with tachometer status monitoring
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
| | Temperature | - Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| | |
RoHS
|
 | | Environmental Spec. | - Operating Temperature: 10° to 35°C (50° to 95°F)
- Non-operating Temperature: -40° to 70°C (-40° to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
| | | Part Number | Qty | Description | | Motherboard / Chassis | MBD-X8DAi
CSE-743TQ-865B-SQ | 1
1 | Super X8DAi Motherboard
4U SC743TQ-865B-SQ Chassis | | Backplane | CSE-SAS-743TQ | 1 | SC743 SAS / SATA Backplane [ Manual ] | | Bezel Filter | - | 1 | Front Bezel Filter | | Cable(s) | CBL-0157L
CBL-0061L | 2
5 | 8pin to 8pin ribbon cable with tube for SGPIO, 40cm, PBF
35CM, SATA CABLE, PB FREE | | CD | CDR-X8 | 1 | Driver CD | | Drive Tray(s) | CSE-PT17B | 8 | Hard Drive Tray | | Fan(s) | FAN-0103L4
FAN-0104L4 | 1
2 | 92x25 4Pin PWM Fan
80x25,4 Pin PWM Fan | | Heatsink / Retention | SNK-P0040AP4 | 2 | Please refer to our Thermal Components Matrix | | I/O Shield | MCP-260-74301-ON | 1 | Color Mylar I/O Shield | | Manual(s) | MNL-1010 | 1 | SW7046A-T/T User's Manual | | Power Supply | PWS-865-PQ | 1 | 865W Low-Noise Power Supply |
|
| | | |
| | | Part Number | Qty | Description | | IPMI | AOC-SIMLC
AOC-SIMLC+ | -
-
| IPMI 2.0 w/ Virtual Media Over LANIPMI 2.0 w/ Virtual Media Over LAN & KVM OverLAN | | Mounting Rails | CSE-PT26-B | - | Chassis Mounting Rails (Black) | | Cooling Fans | FAN-091L4 | - | 9 cm exhaust fan |
|
|
|
|
|
 |
|
 |
|
Key Features
1. Intel® Xeon® processor 5600/5500
series, with QPI up to 6.4 GT/s2. Up to 192GB DDR3 1333/ 1066/
800MHz ECC Registered DIMM /
48GB Unbuffered DIMM3. 2 (x16) PCI-E 2.0,
1 (x4) PCI-E (in x 8 slot),
3x PCI 33MHz slots4. Intel® Dual 82573V/L Gigabit
Ethernet Controller5. 6x SATA2 (3 Gbps) Ports via
ICH10R Controller6. 6 SATA hot-swap drive bays
2 spare Bays7. 865W Low-Noise High Efficiency
Power Supply8. Tower or Rackmount9. PWM Fan Speed Control
|
|
|
|
|
|
|