|
|
|
|
|
| SYS-7046T-H6R | - SuperServer 7046T-H6R (Black)
|
| |
| CPU | - Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel®
Xeon®Processor 5600 Series (Westmere) - Intel®
Xeon®Processor 5500 Series (Nehalem-EP)
| QPI | |
| |
| Memory Capacity | - 12x 240-pin DIMM sockets
- Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
| Memory Type | - 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes | - 1GB, 2GB, 4GB , 8GB , 16GB
| Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
| Chipset | - Intel® 5520 (Tylersburg) chipset
- ICH10R + 2x IOH-36D
| SAS | - LSI 6Gbps SAS 2008
- RAID 0, 1, 10 support
- (Optional: AOC-SAS2-RAID5-KEY) RAID 5 support
| SATA | - Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
| Network Controllers | - Intel® 82576 Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
| Graphics | | Super I/O | |
| |
| PCI-Express | - 7 (x8) PCI-E 2.0 ( in x16 slot)
|
| |
| SAS | | Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
| LAN | | USB | - 2x USB rear ports
- 2x USB on-board
- 4x USB internal headers
- Total 8 USB 2.0 Compliant
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Port | - 1 Fast UART 16550 serial port
|
| |
| BIOS Type | - 32Mb SPI Flash EEPROM with AMI® BIOS
| BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| | | |
| Form Factor | - 4U Rackmountable / Tower
- Optional Rackmount Kit (CSE-PT26)
| Model | |
| |
| Height | | Width | | Depth | | Gross Weight | | Available Colors | |
| |
| Buttons | - Power On/Off button
- System Reset button
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
- Power Fail LED
| Ports | |
| |
| Hot-swap | - 8x Hot-swap Drive Bays
- Supports up to 8x SAS Hard Drives
| Peripheral Bay(s) | - 2x 5.25" Peripheral Drive Bay
- 1x 3.5" Bay
|
| |
| SAS / SATA Backplane w/ Enclosure Management |
| |
| Fans | - 3x 5000 RPM Hot-Swappable Cooling Fans
- 2x 5000 RPM Hot-Swappable Rear Exhaust Fan
| Shroud | |
| |
| 800W (1 + 1) Redundant AC-DC high-efficiency power supply w/ PFC | AC Voltage | - 100 - 240V, 50-60Hz, 10-4 Amp
| +5V standby | | +12V | | With Power Distributor | - +5V: 30 Amp
- +3.3V: 24 Amp
- -12V: 0.6 Amp
|
| |
| CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
| FAN | - Total of eight fan headers supporting up to 8 fans
- Eight 4-pin fan headers
- 8x fans with tachometer status monitoring
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control (4-pin fan only)
| Temperature | - Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| |
RoHS
| | Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
| | Part Number | Qty | Description | Motherboard / Chassis | MBD-X8DTH-6 CSE-745TQ-R800B | 1 1 | Super X8DTH-6 Motherboard 4U Chassis | Backplane | CSE-SAS-743TQ | 1 | 743 SAS BACKPLANE W/AMI MG9072 | Cable 1 | CBL-0118L-02 | 2 | Ipass to 4 SATA cable 23CM, W / 25.5cm SB, S, 26AWG | CD | CDR-X8 | 1 | For X8 series | Heatsink / Retention | SNK-P0038P | 2 | 2U+ PASSIVE CPU HS FOR INTEL LGA1366 X8 MB | Power Supply | PWS-801-1R | 2 | 800W,1U,12V OUTPUT POWER SUPPLY | Bezel Filter | - | 1 | Front Bezel Filter |
|
| | | |
| | Part Number | Qty | Description | Mounting Rails | CSE-PT26 | - | Chassis Mounting Rails |
|
|
|
|
|
|
|
|
|
Key Features
1. Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s2. Up to 192GB DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 48GB Unbuffered DIMM3. 7 (x8) PCI-E 2.0 ( in x16 slot)4. Intel® 82576 Dual-Port Gigabit Ethernet5. 8 x 3.5" Hot-swap Drives Trays 8 x SAS 6 Gbps Hard Drives Supported6. 800W High Efficiency Redundant Power Supply7. Tower or Rackmount
|
|
|
|
|
|
|