 |
 |
 |
|
 |
 | | | | |
 | | MBD-H8DAE-2-O | - H8DAE-2 (Standard Retail Pack)
| | MBD-H8DAE-2-B | |
| | |
| | Form Factor | | | Dimensions | - 12" x 13.05" (30.5cm x 33.2cm)
|
| | |
| | CPU | - Dual 1207-pin Socket F
- Supports up to two Six-Core / Quad-Core / Dual-Core AMD Opteron™ 2000 Series processors
- HT3.0 Link support ^
| | Chipset | - nVidia MCP55 Pro
- nVidia IO-55
- NEC uPD720400
|
| | |
| | Memory Capacity | - 8x 240-pin DIMM sockets support up to
64GB DDR2 800/667/533/400 MHz SDRAM - Single or Dual (recommended) channel memory support
- For Single CPU: Memory must be populated in CPU1 DIMMs only
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
| | Memory Type | - DDR2 800/667/533/400 MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 256MB, 512MB, 1GB, 2GB, 4GB, 8GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| | |
| | SATA | - nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD Support
| | IPMI | | | Network Controllers | - nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Super I/O | | | Audio | |
| | |
| | SATA | | | IDE | - Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
| | Floppy | - 1 Floppy port; 1.44 MB support
| | LAN | | | USB | - FUCI
- Up to 8 USB Ports 2.0 Compliant
- 4 Rear Ports
- 4 Internal Headers
| | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 2 Fast UART 16550 serial ports
| | Parallel Port | - 1 ECP / EPP parallel port
| | Audio | - 1 Line In / Line Out / Microphone port
- 3 Audio Jacks for 7.1 Sound
| | Firewire | |
| | |
| | PCI-Express | - 2 x16 PCI-e Slots
(nVidia SLI Technology Supported) - 1 x8 PCI-e Slot
- 1 x4 (using x8 slot) PCI-e Slot
| | PCI-X | - 1 64-bit 133MHz PCI-X (3.3V) slots
- 1 64-bit 100MHz PCI-X (3.3V) slot
|
| | | |
| | Mid-Tower | | | Tower / 4U Rackmount | | | Important Chassis Notes | - To ensure system stability, a 550W (minimum) ATX power supply
[ 4-pin (+12V), 8-pin (+12V) and 24-pin are required]
|
| | |
| | BIOS Type | - 8Mb Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus Protection
- SMBIOS 2.3
|
| | |
| | Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super
 Doctor III - Watch Dog
| | Power Configurations | - ACPI Power Management
- Wake-On-Ring (WOR) headert
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- CPU Fan auto-off in sleep mode
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
- Suspend to RAM (STR)
|
| | |
| | CPU | - Monitors CPU Core Voltages, +1.5V, +3.3V, +5V, ±12V, 3.3V Standby, 5V Standby, HyperTransport Link voltage 1.2V, memory voltage 1.8V, VBAT
- CPU switching voltage regulator
| | FAN | - Total up to 8-fan status tachometer monitoring
- Up to eight 4-pin fan headers
- Status monitor for speed control
- Stauts monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal Control for 8x Fan Connectors
- I2C Temperature Sensing Logic
| | LED | - CPU / System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED
| | Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
| | |
| RoHS
|
 | | Environmental Spec. | - Operating Temperature: 10?to 35?C (50?to 95?F)
- Non-operating Temperature: -40?to 70?C (-40?to 158?F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
| | |
| | FCC | |
|
|
| | | | |
| | | Part Number | Qty | Description | | H8DAE-2 | MBD-H8DAE-2 -O | 1 | H8DAE-2 Motherboard | | Retention | BKT-0012L | 2 | RETENTION MODULE FOR AMD CPU SOCKET F,ROHS | | I/O Cable 1 | CBL-0044L | 6 | 57.5CM SATA FLAT S-S PBF | | I/O Cable 2 | CBL-0083L | 1 | 15.7" USB 2.0 2-PORT W/KEY | | I/O Cable 3 | CBL-022L | 1 | ATX FLOPPY CABLE 3 HEADERS PB FREE | | I/O Cable 4 | CBL-036L-03 | 1 | 18" ATA 133/100/66 3-DROP TPE CABLE, PBF | | Driver Disk | CDR-A+NVDA2 | 1 | DRIVER CD FOR MCP55 CHIPSET A+ MB | | I/O Shield | MCP-260-00004-00 | 1 | STD I/O SHIELD FOR 4 USB & 2X3 AUDIO (H8DA8-2) |
|
|
| |
|
|
|
|
 |
|
 |
|
Key Features
Key Features
1. Two Six-Core / Quad-Core / Dual-Core
AMD Opteron™ 2000 Series (Socket F)
support; HT3.0 Link support ^2. nVidia MCP55 Pro
nVidia IO-55 Chipset
NEC uPD7204003. Up to 64GB DDR2-800/667/533 SDRAM4. Dual-port Gigabit
LAN/Ethernet Controller5. 6 SATA2 3.0Gbps Ports6. 2 (x16), 1 (x8) &
1 (x4) (using x8 slot)PCI-e,
1 64-bit 133MHz PCI-X,
1 64-bit 100MHz PCI-X7. SIMLP IPMI 2.0 Support8. 8 Fan Support with Speed Control
|
|
|
|
|
|
|