 |
|
MBD-H8DCT-HLN4F-B |
|
| |
|
|
| Form
Factor |
|
|
Dimensions |
- 6.8" x 16.64" (16.4cm x 42.3cm)
|
| |
|
|
| CPU |
- Dual 1207-pin Socket C32
- Supports two 8/6/4-Core ready AMD
Opteron™ 4000 Series processors
- HT3.0 Link support
|
| Chipset |
- AMD chipset SR5670 + SP5100
|
| |
|
|
| Memory
Capacity |
- 12 DIMM sockets
- Support up to 192GB Registered ECC or 64GB
Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 12 DIMMs
slots
- Dual channel memory bus
- For Dual CPUs: Recommended that memory be
populated equally in adjacent memory banks
-
See Detailed Memory Support Matrix
|
| Memory
Type |
- DDR3 1600/1333/1066 MHz Registered ECC or
Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated
DIMMs
|
| DIMM
Sizes |
|
| Memory
Voltage |
|
| |
|
|
| SATA |
- AMD SP5100 (RAID 0, 1, 10)
|
| IPMI |
- Support for Intelligent Platform Management
Interface v.2.0
- IPMI 2.0 with virtual media over LAN and
KVM over LAN support
- Winbond® WPCM450 BMC
|
|
Network Controllers |
- Intel® I350 Quad Gigabit Ethernet LAN
controller
- 10/100/1000BASE-T support
|
| VGA |
|
| Super
I/O |
|
| |
|
|
| SATA |
|
| LAN |
- 4 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
|
| USB |
- 4x USB 2.0 ports
- 2x Rear, 1x header (2 ports)
|
| VGA |
|
| Serial
Ports |
- 1x Fast UART 16550 serial port
|
| Others |
|
| |
|
|
| PCI-E |
- 1 PCI-E 2.0 x16
- 1 PCI-E 2.0 x8 (in x4 slot)
for SMC SAS adapter card support
|
|
 |
|
|
|
|
| 2U
Twin & 2U Twin^2 |
- SC827H, SC827HQ/HD, SC217HQ/HD
|
| |
|
|
|
|
| Server
SKUs |
|
| |
|
|
| BIOS
Type |
- 16Mb SPI Flash ROM with AMI® BIOS
|
| BIOS
Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
| |
|
|
|
Software |
|
| Power
Configurations |
- ACPI Power Management
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss
recovery
|
| |
|
|
| CPU |
- Monitors CPU Core Voltages, +1.8V, +3.3V,
+5V, +12V, +3.3V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
|
| FAN |
- Up to 3-fan status tachometer monitoring
- Up to three 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support (w/o speed control)
- Low noise fan speed control
(4-pin fan only)
- Pulse Width Modulated (PWM) fan connectors
|
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 8x Fan connectors
- I2C Temperature Sensing Logic
|
| LED |
- CPU / System Overheat LED
- +5V Standby Alert LED
|
| |
|
|
RoHS
|
|
|
Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
| |
|
|
| FCC |
- Passed to meet FCC standard requirement
|
|