 |
 |
 |
|
 |
 | | | | |
 | | MBD-H8DM3-2-O | - H8DM3-2 (Standard Retail Pack)
| | MBD-H8DM3-2-B | |
| | |
| | Form Factor | | | Dimensions | - 12" x 13.05" (30.5cm x 33.2cm)
|
| | |
| | CPU | - Dual 1207-pin Socket F
- Supports up to two Six-Core / Quad-Core / Dual-Core AMD Opteron™ 2000 Series processors
- HT3.0 Link support ^
| | Chipset | |
| | |
| | Memory Capacity | - 8x 240-pin DIMM sockets support up to
64GB DDR2 800/667/533/400 MHz SDRAM - For Single CPU: Memory must be populated in CPU1 DIMMs only
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- Dual channel memory bus
| | Memory Type | - DDR2 800/667/533/400MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB
| | Memory Voltage | |
| | |
| | SAS | | | SATA | - nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA2 Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5 JBOD Support
| | IPMI | | | Network Controllers | - nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | VGA | - ATI ES1000 Graphics Controller
16MB Graphics & VGA port
| | Super I/O | |
| | |
| | SAS | - Eight SAS / SATA (internal) ports
- Up to 8 SAS / SATA hard drives supported
| | SATA | | | IDE | - Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
| | Floppy | - 1 Floppy port; 1.44 MB support
| | LAN | | | USB | - Up to 6 USB Ports 2.0 Compliant, 1.1 Compatible
- 2 Rear Ports
- 4 Internal Headers
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1 Fast UART 16550 serial port
- 1 serial port header
| | Parallel Port | - 1 ECP / EPP parallel port
| | Others | - 1 SATA DOM power connector
|
| | |
| | PCI-Express | - 2 x8 PCI-e slots
- 1 x4 PCI-e (in a x8 physical slot)
- 1 SEPC (Supermicro extended Power Connector) slot for 2U active riser cards w/ a power extension (i.e. CSE-RR2UE-AX)
| | PCI-X | - 1 64-bit 133MHz PCI-X (3.3V) slots
- 2 64-bit 133/100MHz PCI-X (3.3V) slots
| | IPMI | |
| | | |
| | 2U Chassis | | | Important Chassis Notes | - To ensure system stability, a 550W (minimum) ATX power supply
[ 4-pin (+12V), 8-pin (+12V) and 24-pin are required]
|
| | |
| | BIOS Type | - 8Mb Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
| | |
| | Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super
 Doctor III - Watch Dog
| | Power Configurations | - ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) headert
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
|
| | |
| | CPU | - Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
- CPU switching voltage regulator
| | FAN | - Total up to 8-fan status tachometer monitoring
- Up to six 3-pin and two 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- I2C Temperature Sensing Logic
| | LED | - CPU / System Overheat LED
- +5V Standby Alert LED
| | Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
- Chipkill Support
|
| | |
| RoHS
|
 | | Environmental Specifications | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
| | |
| | FCC | - Passed to meet FCC standard requirement
|
|
|
| | |
| | | Part Number | Qty | Description | | H8DM3-2 | MBD-H8DM3-2 -O | 1 | H8DM3-2 Motherboard | | Retention | BKT-0012L | 2 | RETENTION MODULE FOR AMD CPU SOCKET F,ROHS | | I/O Cable 1 | CBL-0044L | 4 | 57.5CM SATA FLAT S-S PBF | | I/O Cable 2 | CBL-0097L-02 | 2 | 79536-3220,50CM IPASS TO 4 SATA,PB FREE | | I/O Cable 3 | CBL-010L | 1 | 9 PIN SERIAL PORT DTK CABLE, LF | | I/O Cable 4 | CBL-022L | 1 | ATX FLOPPY CABLE 3 HEADERS PB FREE | | I/O Cable 5 | CBL-036L-03 | 1 | 18" ATA 133/100/66 3-DROP TPE CABLE, PBF | | Driver Disk | CDR-A+NVDA2 | 1 | DRIVER CD FOR MCP55 CHIPSET A+ MB | | I/O Shield | CSE-PT7L | 1 | I/O SHIELD FOR DUAL LAN MOTHERBOARD, PB FREE |
|
|
|
|
|
 |
|
 |
|
Key Features
Key Features
1. Two Six-Core / Quad-Core / Dual-Core
AMD Opteron™ 2000 Series (Socket F)
support; HT3.0 Link support ^2. nVidia MCP55 Pro / AMD 8132 Chipsets3. Up to 64GB DDR2 800/667/533 SDRAM4. Dual-port Gigabit
LAN/Ethernet Controller5. 8-port LSI 1068E SAS Controller6. 2 x8 PCI-e,
1 x4 PCI-e (in x8 slot),
1 64-bit 133MHz PCI-X,
2 64-bit 133/100MHz PCI-X7. ATI ES1000 Graphics8. SIMLP IPMI 2.0 Support9. 8 Fan Support with Speed Control
|
|
|
|
|
|
|
|