 | |
 | | MBD-H8DMT-IBX | |
| | |
| | Form Factor | | | Dimensions | - 16.4" x 6.5" (41.6cm x 16.5cm)
|
| | |
| | CPU | - Dual 1207-pin Socket F
- Supports up to two Six-Core / Quad-Core / Dual-Core AMD Opteron™ 2000 Series processors
- HT3.0 Link support ^
| | | - Two Hyper-Transport links between the CPUs
| | Chipset | | CPU-integrated NB functions, including DRAM controller and
Hyper-Transport links | | Note: SE processors not recommended for 1U chassis |
| | |
| | Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 64GB DDR2 800/667/533 MHz memory
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- For Single CPU: Memory must be populated in CPU1 DIMMS only
- Dual channel memory bus
| | Memory Type | - DDR2 800/667/533 MHz registered ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 256MB, 512MB, 1GB, 2GB, 4GB, 8GB
| | Memory Voltage | |
| | |
| | SATA | - nVidia MCP55-Pro SATA2 3.0Gbps Controller
- 4x SATA2 Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD support
| | Network Controllers | - Intel Zoar (82575) Dual-port Gigabit Ethernet controller with VMDq support
- Support 10/100/1000BASE-T link speeds, 2x RJ45 ports
| | Graphics | | | Super I/O | |
| | |
| | SATA | | | LAN | | | USB | - 2x USB rear ports
- 2x USB internal headers
- 2x USB internal ports (Type A)
- Total of 6 USB 2.0 Compliant ports
| | VGA | | | Serial Port | - 2x Fast UART 16550 serial ports
(1x Header, 1x Port)
| | InfiniBand | - 1x External InfiniBand CX4 Connector
|
| | |
| | PCI-Express | - One PCI-Express (x16) Slot
|
| | | |
| | 2U Chassis | |
| | |
| | BIOS Type | - 8Mb Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus Protection
- SMBIOS 2.3
|
| | |
| | Software | | | Power Configurations | - ACPI Power Management
- Wake-On-LAN (WOL) header
- CPU Fan auto-off in sleep mode
- Power-on mode control for AC power loss recovery
|
| | |
| | CPU | - Monitors CPU Core Voltages, +3.3V, +12V, +5V Standby, 1.5V, VBAT, VDD, HyperTransport Link voltage, memory voltage, Chipset voltage
- CPU switching voltage regulator
| | FAN | - Total of Four fan headers supporting up to 4 fans
- 4x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on / off control
- Low noise fan speed control
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal Control for 4x Fan Status
- I2C Temperature Sensing Logic
| | LED | - CPU / System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED
| | Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
| | |
| RoHS
|
 | | Environmental Specifications | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|