Product SKUs | MBD-X7DVL-3-O (Standard Retail Pack)
MBD-X7DVL-3-B (Bulk Pack)
|
CPU | Dual 771-pin LGA Sockets Supports up to Dual Intel 64-bit Xeon Processor of the same type below:
Quad-Core Intel® Xeon®Processor 5400/5300 sequence (Harpertown/Clovertown processor) up to 3.16GHz
Dual-Core Intel® Xeon®Processor 5200/5100/5000 sequence (Wolfdale/Woodcrest/Dempsey processor) up to 3.4GHz
|
Chipset | Intel 5000V (Blackford VS) chipset MCH + ESB2 |
Memory | Support up to 24GB 667/533MHz DDR2 ECC FB-DIMM memory 6 x 240-pin DIMM sockets Dual branch memory bus Memory must be populated in pairs No Memory Mirrioring supported Memory Size : 4GB, 2GB, 1GB, 512MB, 256MB 1.8V only 1.5V (AMB)
Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel x4 and x8 Single Device Data Correction
|
Graphics | XGI Volari Z7 PCI-E Graphics Processor |
SATA / SAS | Intel ESB2 SATA 1.0 Gbps Controller RAID 0, 1, 5, 10 support (Window only)
LSI 1068E PCI-E SAS Controller 8 SAS Ports supporting up to 8 SAS HDD RAID 0, 1, 5, 10 support (Windows Only) |
IPMI | Support for Intelligent Platform Management Interface v.2.0 200-pin IPMI slot (SIMLP) |
Network Controller | Intel (ESB2/Gilgal) 82563EB Dual-port Gigabit Ethernet Controller Supports 10 BASE-T. 100BASE-TX, and 1000BASE-T, RJ45 output Intel I/OAT support for fast, scaleable, and reliable networking
|
Input/Ouput | 8 x SAS ports 8 x SAS hard drives supported 6 x Serial ATA ports 6 x SATA hard rives supported Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) incluing CF card Supports UDMA Mode 5, PIO Mode 4, and ATA/100 1 x Floppy controller; 1.44 MB, 2.88 MB 2 x RJ45 LAN ports 2 x USB rear ports 4 x USB internal hearders 1 x VGA Port PS/2 keyboard and mouse ports 1 x Fast UART 16550 serial port 1 x Fast UART 16550 serial header 1 x ECP / EEP parallel port header |
System BIOS | 8 Mb Flash EEPROM with Phoenix BIOS Plug and Play (PnP) SMBIOS 2.3, DMI 2.1, PCI 2.2 ACPI 1.0 USB Key board support Hardware BIOS Virus protection |
Chassis |
|