|
|
|
|
SBI-7426T-T3
|
Processor Blade SBI-7426T-T3 (Black)
|
CPU
|
Dual 1366-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon®processor(s) of the same type below:
Intel® Xeon® Processor X5600/E5600/L5600 Series (Westmere) 40W - 95W
Intel® Xeon® Processor X5500/E5500/L5500 Series (Nehalem-EP) 38W - 95W Dual 771-pin LGA Sockets
|
QPI
|
up to 6.4 GT/s
|
Memory Capacity
|
12x 240-pin DIMM sockets
Supports up to 96 GB VLP 1333 / 1066 / 800MHz DDR3 ECC Registered memory
Supports up to 24 GB VLP 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
Memory Mirroring supported
|
Memory Type
|
1333 / 1066 / 800MHz VLP ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes
|
1GB, 2GB, 4GB, 8GB
|
Memory Voltage
|
1.5 V and 1.35 V
|
Error Detection
|
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
NOTE: 14-Blade can only use VLP (Very Low Profile) memory module.
|
Chipset
|
Intel® 5500 (Tylersburg) chipset
ICH10R + IOH-24D
|
SATA
|
Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 10 support (Linux)
|
IPMI
|
Support for Intelligent Platform Management Interface (IPMI) v.2.0 via Chassis Management Module (CMM)
|
Network Controllers
|
Intel® 82576 Dual-Port Gigabit Ethernet
Intel® I/OAT 3 support for fast, scaleable, and reliable networking
VMDq support for better performance of virtualization
|
Super I/O
|
Winbond 83527HF chip
|
Clock Generator
|
CK505 chip
|
InfiniBand Support
|
4x DDR (20Gb/s) InfiniBand mezzanine HCA (Optional)
|
KVM
|
1 Front Connector for Supermicro KVM Card
|
BIOS Type
|
32Mb SPI Flash EEPROM with AMI® BIOS
|
BIOS Features
|
Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support
|
Height
|
11.32" (288 mm)
|
Width
|
1.19" (30.2 mm)
|
Depth
|
18.9" (480mm)
|
Weight
|
8.6 lbs (3.9 kg)
|
Available Colors
|
Black
|
Buttons
|
Power On/Off button
KVM button
|
LEDs
|
Power LED
UID / KVM LED
Network Activity LED
Fault LED
|
Connector
|
SUV (Serial/USB/Video) & KVM Connector
|
Hot-swap
|
3x 2.5" SATA Hot-swap drive bays
|
Operating Environment / Compliance
|
Environmental Spec
|
Operating Temperature: 10°C to 35°C (50°F to 95°F)
Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)
|
Electromagnetic Compatibility (EMC)
|
United States / Canada
|
FCC- Emissions (US) Verification
|
Europe
|
EN55022 - Emissions
EN55024 - Immunity
EN61000-3-2 - Harmonics
EN61000-3-3 - Voltage Flicker
CE - EMC Directive 89/336/EEC
|
United States / Canada
|
UL60950-1 - CSA/CUL 60950-1
|
Europe
|
EN60950-1, CE - Low Voltage Directive 73/23/EEE
|
Germany
|
TUV
|
|
Part Number
|
QTY
|
Description
|
Motherboard
|
MBD-B8DTE-O-P
|
1
|
Super B8DTE Motherboard
|
Chassis
|
CSE-714M-230B
|
1
|
Black Front Blade Chassis (B = Black)
|
Hard Drive Tray
|
MCP-220-00047-0B
|
3
|
Black 2.5" Hard Drive Tray
|
Front Panel Control
|
MCP-280-KVM1
|
1
|
Power & KVM buttons, LED, KVM connector
|
|
Part Number
|
QTY
|
Description
|
Heatsink / Retention
|
SNK-P0033P
|
2
|
Heatsink for Intel CPU
|
Networking
|
AOC-XEH-iN2
AOC-IBH-XDD
AOC-IBH-XQD
AOC-IBH-XQS
AOC-IBH-XDS
|
1
1
1
1
1
|
Dual Port 10G Ethernet AOC for Blade
InfiniBand Dual-Port 4x DDR 20Gbps Mezzanine HCA (Mellanox ConnectX chip)
InfiniBand Dual-Port 4x QDR 40Gbps Mezzanine HCA (Mellanox ConnectX-2 chip)
InfiniBand Single port 4x QDR 40Gbps Mezzanine HCA (Mellanox ConnectX chip)
InfiniBand Single port 4x DDR 20Gbps Mezzanine HCA (Mellanox ConnectX chip)
|
|
|
|
|
|
|
|
Key Features
- Intel® Xeon® processor 5600/5500
series, with QPI up to 6.4 GT/s
- Intel® 5500 (Tylersburg) Chipset
- Up to 96GB VLP DDR3 1333/ 1066/
800MHz ECC Registered DIMM / 24GB
Unbuffered DIMM
- Intel® 82576 Dual-Port Gigabit
Ethernet
- Integrated IPMI2.0 w/ remote KVM and
virtual media
- 3x 2.5" Hot-Plug SATA Drive Trays
- Integrated Matrox G200eW Graphics
|
|
|
|
|
|
|