|
|
|
|
SYS-4048B-TRFT
|
SuperServer 4048B-TRFT (Black)
|
CPU
|
Intel® Xeon® processor E7-8800 v2 / 4800 v2 family (up to 15 Cores and 155W)
Quad Socket R1 (LGA 2011)
|
Cache
|
Up to 37.5 MB
|
System Bus
|
QPI up to 8 GT/s
|
Memory Capacity
|
96x 240-pin DDR3 DIMM sockets
Supports up to 6TB DDR3 ECC Registered memory (RDIMM) and LRDIMM in 96 DIMM sockets
|
Memory Type
|
1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes
|
64GB, 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
Memory Voltage
|
1.5 V, 1.35 V
|
Error Detection
|
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
|
Chipset
|
Intel® C602J chipset
|
AHCI SATA
|
SATA2 (3Gbps) with RAID 0, 1, 5, 10
SATA3 (6Gbps) with RAID 0, 1
|
IPMI (via AOM)
|
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Aspeed 2400
|
Network Controllers (via AOM)
|
Intel® X540 Dual Port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBase-T , 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics
|
Aspeed 2400
|
Super I/O
|
Nuvoton W83527HG
|
SATA
|
2x SATA3 (6Gbps) ports
4x SATA2 (3Gbps) ports
|
LAN
|
2x RJ45 10GBase-T ports on AOM
1x dedicated LAN port for IPMI on AOM
|
USB
|
2x USB 2.0 ports
|
DOM
|
1 DOM (Disk on Module) power connector
|
Serial Port / Header
|
2x Fast UART 16550 ports: 1 rear and 1 header
|
BIOS Type
|
16MB SPI Flash EEPROM with AMI® BIOS
|
BIOS Features
|
Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support
|
Form Factor
|
4U Rackmountable
Rackmount Kit: Comes with the system
|
Model
|
CSE-418XTS-R3240B
|
Height
|
7.0" (178mm)
|
Width
|
17.2" (437mm)
|
Depth
|
31.3" (795mm)
|
Weight
|
Net Weight: 150 lbs (68.0 kg)
Gross Weight: 180 lbs (81.6 kg)
|
Available Colors
|
Black
|
PCI-Express
|
11x PCI-E 3.0 slots
(4x PCI-E 3.0 x16 and 7x PCI-E 3.0 x8)
|
Hot-swap
|
24x 2.5" Hard drive bays (default)*
48x 2.5" Hard drive bays (optional)
* BPN-SAS3-216A direct attached backplane, system supports up to 24 HDDs by using selected RAID/HBA card and default HDD connection is onboard C602J chipset 2 SATA3 + 4 SATA2
|
Fans
|
4x 92mm RPM Hot-Swappable Cooling Fans
3x 80mm RPM Hot-Swappable Rear Exhaust Fan
2x 80mm Rear Exhaust Fans (optional)
|
Shroud
|
1x Air Shroud (MCP-310-41804-0B)
|
|
1620W high-efficiency redundant power supply w/ PMBus
|
AC Input
|
1000W Output @ 100-120V, 12-10A, 50-60Hz
1200W Output @ 120-140V, 12-10A, 50-60Hz
1620W Output @ 180-240V, 10.5-8A, 50-60Hz
|
DC Output
|
1000W: +12V/84A; +5Vsb/4A
1200W: +12V/100A; +5Vsb/4A
1620W: +12V/150A; +5Vsb/4A
|
Certification
|
80 Plus Platinum
|
CPU
|
Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V)
Standby, VBAT, Memory, Chipset Voltages.
4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
|
FAN
|
4-pin fan headers with tachometer status monitoring
Low noise fan speed control mod
|
Temperature
|
Monitoring for CPU and system environment
Thermal Control for 9x fan connectors
|
Other Features
|
Chassis intrusion detection
|
Operating Environment / Compliance
|
RoHS
|
RoHS Compliant
|
Environmental Spec.
|
Operating Temperature: 10°C to 35°C (50°F to 95°F)
Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)
|
|
Part Number
|
QTY
|
Description
|
Motherboard
|
X10QBi
|
1
|
Super X10QBi Motherboard
|
Chassis
|
CSE-418XTS-R3240B
|
1
|
CSE-418XTS-R3240B 4U Chassis with 48x HDD trays
|
Memory Module
|
X10QBi-MEM1
|
8
|
Mylar CPU air shroud for SC418X (X10QBi),PBF
|
Air Shroud
|
MCP-310-41804-0B
|
1
|
Mylar CPU air shroud for SC418X (X10QBi),PBF
|
Add-on Module (Proprietary)
|
AOM-X10QBI-A
|
1
|
Add-on Module support VGA, dual 10GBase-T ports, and Dedicated IPMI 2.0 LAN port
|
Backplane
|
BPN-SAS3-216A
|
1
|
24x 2.5"HDD backplane, support SAS-3 12Gb/s,mini-SAS HD connector,new
29-pin SAS-3 receptacles,support power control stagger spin,pre-charge
resistor,fuse protect and SGPIO encl mgmt,RoHS/REACH,PBF
|
Cable 1
|
CBL-SAST-0591
|
2
|
cross-over mini SAS HD to 4 SATA w/SB, S. 75cm. 30AWG,HF,RoHS/REACH,PBF
|
Heatsink / Retention
|
SNK-P0048PS
|
4
|
2U Passive CPU Heat Sink for X9 Generation Motherboards w/ Narrow ILM
|
Power Supply
|
PWS-1K62P-1R
|
4
|
1620W REDUNDANT POWER MODULE (2 + 2)
|
|
Part Number
|
QTY
|
Description
|
2.5" HDD/SSD Tray
|
MCP-220-00047-0B
|
--
|
Black gen 3rd hot-swap 2.5" HDD tray
|
Cable
|
CBL-SAST-0507-01
|
--
|
Internal mini SAS to Mini SAS HD for LSI 2108, 2208 and 2308 RAID/HBA card
|
Cable
|
CBL-SAST-0531
|
--
|
SAS3 RAID card support
|
Air Shroud
|
MCP-310-41805-0B
|
--
|
Air shroud for 4 memory module configuration (to utilize all PCI-E slots)
|
Rear Fan Kit
|
MCP-320-00046-0N-KIT
|
--
|
Rear fan kit (8.2K RPM fan) when use GPU card
|
GPU Power Cable
|
CBL-PWEX-0581
|
--
|
1 GPU Power Cable for 1 GPU
|
|
|
|
|
|
|
|
Key Features
- Quad socket R1 (LGA 2011) supports Intel® Xeon® processor E7-8800 v2
/ E7-4800 v2 family (15-Core), w/ QPI up to 8.0 GT/s
- Up to 6TB DDR3 1600MHz ECC RDIMMs and LRDIMMs; 96x DIMM sockets
- Up to 11x PCI-E 3.0 slots (4 x16, 7 x8)
- I/O ports via Add-on Card: 2x 10Gb LAN, 1x Dedicated LAN for IPMI Remote Management, 1x VGA
- 24x 2.5" Hot-swap SAS3/SATA3 HDD
or SSD (selected RAID/HBA cards); 48x 2.5" Hot-swap HDD/SSD optional
- 4x 9cm + 3x 8cm Heavy-duty Fans
- 1620W Redundant (2+2) Power Supplies, Platinum Level (94%+)
|
|
|
|
|
|
|