|
|
|
|
|
MBD-X9SCM
-B |
|
|
|
Form Factor |
uATX |
Dimensions |
9.6" x 9.6", (24.4cm x 24.4 cm)
|
|
|
CPU |
-
Intel® Xeon® processor E3-1200 & v2
series, Intel® 2nd Gen and 3rd Gen Core i3, Intel® Pentium® and Celeron
processors
*** *
- Socket H2 (LGA 1155)
|
|
|
Memory Capacity |
- 4x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
|
Memory Type |
- 1333/1600MHz*** ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
|
Chipset |
|
SATA |
- 4x SATA2 (3Gb/s) w/ RAID 0, 1, 5, 10
- 2x SATA3 (6Gb/s) w/ RAID 0, 1
|
Network Controllers |
- Intel® 82579LM and 82574L, 2x Gigabit LAN ports
- Virtual Machine Device Queues High efficient I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
Video |
- BMC integrated Matrox G200
|
Super I/O |
|
|
|
Serial ATA |
- 6 SATA ports
- 6 SATA hard drives supported
|
LAN |
|
USB |
- 9x USB 2.0 ports total
(2x rear + 6x via header + 1x type A)
|
VGA |
|
Serial Port / Header |
- 2x Fast UART 16550 serial port
(one header and one rear port)
|
DOM |
- 1x DOM (Disk on Module) power connector
|
TPM |
|
|
|
|
|
1U Chassis |
|
Important Chassis Notes |
- To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
|
|
|
PCI-Express |
- 2 (x8) PCI-E 3.0 slots***
- 2 (x4) PCI-E 2.0 in x8 slots
|
|
|
BIOS Type |
- 64Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- DMI (SMBIOS) 2.7
- ACPI 4.0
- PCI 2.3
- USB Keyboard support
|
|
|
Software |
|
Power Configurations |
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Internal/External modem ring-on
|
|
|
Voltage |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
FAN |
- Total of 5 fan headers supporting up to 5 fans
- Five 4-pin fan headers
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- CPU / System Overheat LED
- +5V Standby alert LED
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
| |
|
|
Part Number |
Qty |
Description |
X9SCM |
MBD-X9SCM
|
1 |
X9SCM
Motherboard |
I/O Cables |
CBL-0044L |
2 |
57.5CM SATA FLAT S-S PBF |
I/O Shield |
MCP-260-00027-0N |
1 |
STD I/O SHIELD |
|
|
|
|
|
|
|
Key Features
Key Features
1. Single socket H2 (LGA 1155) supports
Intel® Xeon® E3-1200 & E3-1200 v2
series, 2nd and 3rd Gen Core i3
processors***, Pentium, Celeron
2. Intel® C204 PCH Chipset
3. Up to 32GB DDR3 ECC 1333MHz /
1600MHz*** UDIMMs in 4 sockets
4. Intel® 82579LM and 82574L,
2x Gigabit Ethernet LAN ports
5. 4x SATA2 3Gb/s w/ RAID 0, 1, 5, 10;
2x SATA3 6Gb/s w/ RAID 0, 1
6. 2x (x8) PCI-E 3.0*** slots,
2x (x4) PCI-E 2.0 in x8 slots
7. 9x USB 2.0 ports
(2 rear + 6 via header + 1 Type-A)
|
|
|
|
|
|
|