|
MBD-X9SRD-F
-B |
|
|
|
Form Factor |
|
Dimensions |
- 4.75" x 15.95", (12.06cm x 40.51cm)
|
|
|
CPU |
- Single Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600/1600
and E5-2600/1600 v2 family†
(up to 12 cores and up to 130W)
|
Note |
† BIOS version 3.0 or above is required |
|
|
Memory Capacity |
- 4x 240-pin DDR3 DIMM sockets
- Supports up to 128 GB DDR3 ECC Registered memory (RDIMM)
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
|
Memory Type |
- 1866/1600/1333/1066 MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
-
32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
64GB LRDIMM
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
|
Chipset |
|
SATA |
- 1x SATA DOM
- SATA 3.0 6Gb/s with RAID 0, 1, 5, 10
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers |
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
VGA |
|
|
|
Serial ATA |
|
LAN |
- 1 RJ45 Dedicated IPMI LAN port
|
USB |
- 2 USB 2.0 ports (1 header + 1 type A)
|
VGA |
|
Serial Port / Header |
- 2 Fast UART 16550 serial port
(one header and one rear port)
|
DOM |
- 1 DOM (Disk on Module) power connector
|
TPM |
|
|
|
|
|
3U Chassis |
|
Important Chassis Notes |
- To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
|
|
|
PCI-Express |
|
|
|
BIOS Type |
- 32Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- RTC (Real Time Clock) Wakeup
|
|
|
Software |
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
|
Power Configurations |
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Suspend to RAM (STR)
|
|
|
Voltage |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
FAN |
- Total of 5 fan headers supporting up to 5 fans
- Five 4-pin fan headers
- 5x fans with tachometer status monitoring
|
Temperature |
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- CPU / System Overheat LED
- +5V Standby alert LED
- UID/Remote UID
|
Other Features |
| |