|
MBD-H8DME-2 |
|
|
|
Form
Factor |
|
Dimensions |
- 12" x 13.05" (30.5cm x 33.2cm)
|
|
|
CPU |
- Dual 1207-pin Socket F
- Supports up to two Six-Core /
Quad-Core / Dual-Core AMD Opteron™ 2000 Series
processors
- HT3.0 Link support ^
|
|
- Two Hyper-Transport links between the CPUs
|
Chipset |
- nVidia MCP55 Pro
- NEC uPD720400
|
|
|
Memory
Capacity |
- Sixteen 240-pin DIMM sockets
- Support up to 128GB DDR2 800/667/533 MHz
memory *
- For Single CPU: Memory must be populated in
CPU1 DIMMs only
- For Dual CPUs: Recommended that memory be
populated equally in adjacent memory banks
- Dual channel memory bus
|
Memory
Type |
- DDR2 800/667/533/400 MHz Reg. ECC SDRAM
72-bit, 240-pin gold-plated DIMMs
|
DIMM
Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB
|
Memory
Voltage |
|
|
|
SATA |
- nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD Support
|
IPMI |
- Support for Intelligent Platform Management
Interface v.2.0
- 200-pin IPMI slot
- (Optional:
AOC-SIM1U(+) R 3.00) **
- RMM (Remote Management Module)
- (Card not included)
|
Network Controllers |
- nVidia MCP55 Pro Chipset Dual-port LAN /
Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and
1000BASE-T, RJ45 output
|
VGA |
- ATI ES1000 Graphics Controller
16MB Graphics & VGA port
|
Super
I/O |
|
|
|
SATA |
|
IDE |
- Single EIDE channel support up to two UDMA
IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
Floppy |
- 1 Floppy port; 1.44 MB support
|
LAN |
|
USB |
- FUCI
- Up to 6 USB Ports 2.0 Compliant, 1.1
Compatible
- 2 Rear Ports
- 4 Internal Headers
|
VGA |
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
Serial
Ports |
- 1 Fast UART 16550 serial port
- 1 serial port header
|
Others |
- 1 SATA DOM power connector
|
|
|
PCI-Express |
- 2 x8 PCI-e slots
- 1 SEPC (Supermicro extended Power
Connector) slot for 2U active riser cards w/ a power
extension (i.e. CSE-RR2UE-AX)
|
PCI-X |
- 2 64-bit 133/100MHz PCI-X (3.3V) slots
- 2 64-bit 100MHz PCI-X (3.3V) slot
|
IPMI |
|
|
|
|
|
2U
Chassis |
|
Important Chassis Notes |
- To ensure system stability, a 550W
(minimum) ATX power supply
[ 4-pin (+12V), 8-pin (+12V) and 24-pin are required]
|
|
|
BIOS
Type |
- 8Mb Flash EEPROM with AMI® BIOS
|
BIOS
Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus Protection
- SMBIOS 2.3
|
|
|
Software |
- Optional IPMI (Intelligent Platform
Management Interface) 2.0
-
Super
Doctor III
- Watch Dog
|
Power
Configurations |
- ACPI Power Management
- Wake-On-Ring (WOR) headert
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss
recovery
- Internal/External modem remote ring-on
|
|
|
CPU |
- Monitors CPU Core Voltages, +1.5V, +3.3V,
+5V, ±12V, 5V Standby, HyperTransport Link voltage 1.2V,
memory voltage 1.8V, VBAT
- CPU switching voltage regulator
|
FAN |
- Up to 8-fan status tachometer monitoring
- Up to six 3-pin & two 4-pin fan headers
- Status monitor for speed control
- Stauts monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal Control for 8x Fan Connectors
- I2C Temperature Sensing Logic
|
LED |
- CPU / System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED
|
Other
Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
|
|
RoHS
|
|
Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
FCC |
- Passed to meet FCC standard requirement
|
|