 |
| SKU |
|
| |
|
|
| Form
Factor |
|
|
Dimensions |
- 16.4" x 13" (41.7cm x 33.0cm)
|
| |
|
|
| CPU |
- Quad 1207-pin Socket F
- Supports up to four Six-Core /
Quad-Core AMD Opteron™ 8000 Series processors**
- HT3.0 Link support
|
| Chipset |
- AMD SR5690 + SP5100 Chipset
|
| |
|
|
| Memory
Capacity |
- Sixteen 240-pin DIMM sockets
- Support up to 128GB memory
- Dual channel memory bus; Single or Dual
(recommended) channel memory support
- For Dual CPUs: Recommended that memory be
populated equally in adjacent memory banks
|
| Memory
Type |
- DDR2 800/667/533 MHz Registered ECC SDRAM
72-bit, 240-pin gold-plated DIMMs
|
| DIMM
Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB
|
| Memory
Voltage |
|
| |
|
|
| SATA |
- AMD SP5100 (RAID 0, 1, 10)
|
| SAS |
- LSI 2008 8 port SAS2 controller
- RAID 0, 1, 10; RAID 5 Optional
- Optional: AOC-SAS2-RAID5-KEY
RAID 5 support
|
| IPMI |
- Support for Intelligent Platform Management
Interface v.2.0
- IPMI 2.0 with virtual media over LAN and
KVM over LAN support
- Winbond® WPCM450 BMC
|
|
Network Controllers |
- Intel® 82576 controller, Dual-Port
Gigabit Ethernet
- 10/100/1000BASE-T support
|
| VGA |
- Matrox G200eW 16MB DDR2 graphics
|
| Super
I/O |
|
| |
|
|
| SATA |
|
| SAS |
- Integrated LSI 2008 SAS2 Controller
- Eight Serial Attached SCSI (SAS) ports
- 8x 6Gbps SAS / SATA ports
|
| IDE |
- Single EIDE channel support up to two UDMA
IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
| LAN |
- 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
|
| USB |
- 6x USB 2.0 ports
- 2x Rear / 2x header / 2x type A
|
| VGA |
|
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial
Ports |
- 1x Fast UART 16550 serial port
- 1x serial port header
|
| Others |
- 1 SATA DOM power connector
|
| |
|
|
|
PCI-Express |
|
|
 |
|
|
|
|
| 1U
Chassis |
|
| 2U
Chassis |
|
| Tower
/ 4U Rackmount |
|
| |
|
|
| BIOS
Type |
- 16Mb SPI Flash ROM with AMI® BIOS
|
| BIOS
Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
| |
|
|
|
Software |
|
| Power
Configurations |
- ACPI Power Management
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss
recovery
|
| |
|
|
| CPU |
- Monitors CPU Core Voltages, +1.8V, +3.3V,
+5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
|
| FAN |
- Up to 9-fan status tachometer monitoring
- Up to nine 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support (w/o speed control)
- Low noise fan speed control
(4-pin fan only)
- Pulse Width Modulated (PWM) fan connectors
|
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 9x fan connectors
- I2C Temperature Sensing Logic
|
| LED |
- CPU / System Overheat LED
- +5V Standby Alert LED
|
| Other
Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
|
|
RoHS
|
|
|
Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
| |
|
|
| FCC |
- Passed to meet FCC standard requirement
|
|