|
|
|
|
New Page 1
|
MBD-H8SML-iF |
- H8SML-iF (Standard Retail
Pack)
|
|
|
Form Factor |
|
Dimensions |
- 9.6" x 9.6 " (24.4cm x
24.4cm)
|
|
|
CPU |
- Single 942-pin Socket AM3+
- Supports up to Single
8/4-Core ready AMD Opteron™ 3000
Series processor
- HT3.0 Link support
|
Chipset |
- AMD chipset SR5650 / SP5100
|
|
|
Memory Capacity |
|
Memory Type |
- DDR3 1600/1333/1066MHz
un-buffered ECC / non-ECC SDRAM 72-bit,
240-pin gold-plated DIMMs
|
DIMM Sizes |
|
Memory Voltage |
|
|
|
SATA |
|
IPMI |
- Support for Intelligent
Platform Management Interface v.2.0
- IPMI 2.0 with virtual media
over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
Network Controllers |
- Intel 82574L single-port
Gigabit Ethernet, 10/100/1000Base-T support
|
VGA |
- Matrox G200eW 16MB DDR2
graphics
|
Super I/O |
|
|
|
SATA |
|
USB |
- 7x USB 2.0 ports (2x rear /
2x header - 4 ports / 1x type A)
|
VGA |
|
Serial Ports |
- 2 Fast UART 16550 serial
ports
- 1 header & 1 port
|
IPMI |
- 1x dedicated IPMI LAN port
|
|
|
|
|
1U Chassis |
|
|
|
PCI-Express |
- 1 PCI-E 2.0 x8 (in x16
slot)
- 1 PCI-E 2.0 x4 (in x8 slot)
- 1 PCI-E 2.0 x8
|
|
|
|
Server SKUs |
|
|
|
BIOS Type |
- 16Mb SPI Flash ROM with
AMI® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
|
|
Software |
|
Power Configurations |
- ACPI Power Management
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from
Soft-Off
- Power-on mode control for
AC power loss recovery
|
|
|
CPU |
- Monitors CPU Core Voltages,
+1.8V, +3.3V, +5V, ±12V, +3.3V Standby, -12V
Standby, VBAT, HT, memory, chipset
- CPU switching voltage
regulator
|
FAN |
- Up to 5-fan status
tachometer monitoring
- Up to five 4-pin fan
headers
- Status monitor for speed
control
- 3-pin fan support (w/o
speed control)
- Low noise fan speed control
(4-pin fan only)
- Pulse Width Modulated (PWM)
fan connectors
|
Temperature |
- Monitoring for CPU and
chassis environment
- CPU Thermal Trip Support
- Thermal control for 9x fan
connectors
- I2C Temperature
Sensing Logic
|
LED |
- CPU / System Overheat LED
- +5V Standby Alert LED
|
Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
|
|
RoHS
|
|
Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative
Humidity:
8% to 90% (non-condensing)
- Non-operating Relative
Humidity:
5% to 95% (non-condensing)
|
|
|
FCC |
- Passed to meet FCC standard
requirement
|
|
|
|
|
|
|
|
|
|
|
|
Part Number |
Qty |
Description |
H8SML-iF |
MBD-H8SML-iF -O |
1 |
H8SML-iF
Motherboard |
Retention |
BKT-0017L |
1 |
BACKPLATE FOR AMD AM2
CPU ROHS |
Retention |
BKT-0018L |
1 |
RETENTION MODULE FOR
AMD AM2 CPU ROHS |
I/O Cable 1 |
CBL-0044L |
6 |
57.5CM SATA FLAT S-S
PBF |
I/O Cable 2 |
CBL-010L |
1 |
9 PIN SERIAL PORT DTK
CABLE, LF |
I/O Shield |
MCP-260-00027-0N |
1 |
STD I/O SHIELD FOR X8,
H8, X7SB3 SERVER MB (3RD LAN + 4XLAN) |
|
|
|
** It is recommended to use dedicated LAN for KVM-over-LAN with fast
speed needed.
|
|
|
|
|
|
|
|
Key Features
New Page 1
1. Single AMD Opteron™ 3000 series
(3300 ready) processor (Socket AM3+)
8/4-Core ready; HT3.0 Link
2. AMD SR5650 / SP5100 Chipset
3. Up to 32GB DDR3 1600MHz Unb.
ECC/non-ECC; 4x DIMM sockets
4. 2x Intel 82574L single-port Gigabit
Ethernet Controller
5. 6x SATA2 (3.0 Gbps) ports via
AMD SP5100 Controller; RAID 0, 1, 10
6. Expansion slot:
1 PCI-E 2.0 x8 (in x16 slot)
1 PCI-E 2.0 x4 (in x8 slot)
1 PCI-E 2.0 x8
7. Integrated Matrox G200eW Graphics
8. Integrated IPMI 2.0 with Dedicated LAN
|
|
|
|
|
|
|