|
SYS-5015P-T |
- SuperServer 5015P-T (Beige)
|
|
|
CPU |
- Single LGA775 ZIF Socket
- Supports an Intel®
Pentium® D (Smithfield Dual Core)
processor
- Supports an Intel®
Pentium® Extreme Edition processor
- Supports an Intel®
Pentium® 4 processor
- Supports an Intel®
Pentium® 4 Extreme Edition
processor
- Supports an Intel®
Celeron® D processor
- Hyper-Threading (HT)
capable
- 1MB L2 Cache
|
System Bus |
- 1066 / 800 / 533 MHz system
bus
|
|
|
Memory
Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB of
unbuffered, ECC DDR2 667/533/400MHz memory
(Single / Dual Channel)
|
Memory Type |
- DDR2 667/533/400MHz
unbuffered, ECC SDRAM, 240-pin gold-plated
DIMMs
|
DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2GB
|
Memory Voltage |
|
|
|
Chipset |
- Intel E7230 (Mukilteo)
Smithfield chipset
- ICH7R + PXH + Intel® 82573V
|
Serial ATA |
- Intel® ICH7R SATA
controller built-in
- RAID 0, 1, 5, 10
|
IPMI |
|
Network Controllers |
- Dual-port Intel® 82573V
Gigabit PCI-Express Ethernet (Tekoa)
- Supports 1000BASE-TX, RJ45
output
|
VGA |
- On-board ATI RageXL
graphics, 8MB
|
Super I/O |
|
|
|
PCI-Express / PCI-X |
- 1 x Universal (SXB-E) slot
for
[1 (x4) PCI-E Slot] OR
[1x 64-bit PCI-X 133MHz slot]
- 1 x 64-bit PCI-X 100MHz
slot
- 1 x 1U IPMI Slot
|
|
|
Serial ATA |
- Four Serial ATA ports (3
Gbps performance)
- Four SATA hard drives
supported
|
IDE |
- One EIDE channel supports
up to two UDMA IDE devices
- IDE Master / Slave 2 ports
- Supports UDMA Mode 5, PIO
Mode 4, and ATA/100
|
Floppy |
- 1 Floppy controller; 1.44
MB, 2.88 MB, 3-mode support
|
LAN |
|
USB |
- 6x USB 2.0 compliant / 1.1
compatible
- 4 internal USB headers
- 2 rear ports
|
VGA |
|
Keyboard / Mouse |
- PS/2 keyboard and mouse
ports
|
Serial Ports |
- 2x Fast UART 16550 serial
header
|
|
|
|
|
Form Factor |
|
Model |
|
|
|
Height |
|
Width |
|
Depth |
|
Gross Weight |
|
Available Colors |
|
|
|
Buttons |
- Power On/Off button
- UID button
|
LEDs |
- Power / Power Fail LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail
LED
- UID LED
|
Ports |
|
|
|
Hot-swap |
- 4x 3.5" Hot-swap SATA drive
bays
|
|
|
Floppy |
- TEAC 3.5" 1.44MB Slim
Floppy Drive
|
DVD-ROM |
- Panasonic Slim 8x DVD-ROM
drive
|
|
|
1x SAS Hard Drive Backplane |
|
|
Fans |
- 3x 4cm 12,000 RPM Nidec
dual blade fans
|
|
|
400W AC power supply with PFC |
AC Voltage |
- 100 - 240V, 50-60Hz, 6A-3A
Amp
|
+5V |
|
+5V standby |
|
+12V |
|
-12V |
|
+3.3V |
|
|
|
CPU |
- Monitors for CPU Cores
(+1.8V, +3.3V, +5, ±12V, +3.3V/+5V Standby,
VBAT)
- CPU Core 4-Phase-switching
voltage regulator with auto-sense from
0.8375V-1.6000V
|
FAN |
- Fan Speed Control
- Total of four proprietary
fan headers
- 4 fans with tachometer
monitoring
- Status monitor with
firmware speed control
- Low noise fan speed control
|
Temperature |
- Monitoring for CPU and
chassis environment
- CPU thermal trip support
- Thermal Monitor (TM2)
Support
|
LED |
- CPU / System Overheat LED
- +5V standby alert LED
- Suspend-state indicator LED
|
Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
|
|
BIOS Type |
- 8Mb Flash EEPROM with
Phoenix BIOS®
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- Hardware BIOS Virus
protection
- USB Keyboard support
|
|