|
|
|
|
New Page 1
|
SYS-1015B-M3B |
- SuperServer 1015B-M3B (Black)
|
|
|
CPU |
- Single LGA775 ZIF Socket
- Supports Quad-Core Intel® Xeon®
X3300/X3200 series
- Supports Dual-Core Intel® Xeon®
E3100/3000 series
- Supports Intel® Xeon® processor
L3360 and L3110 series
- Supports Intel® Core™2 Quad
Q9000/Q8000/Q6000 series
- Supports Intel® Core™2 Duo
E8000/E7000/E6000/E4000 series
- Supports Intel® Pentium®
E5000/E2000 series
- Supports Intel® Celeron® E1000 and
400 series
- NOTE: Intel Xeon processor L3014
requires an LGA771 socket and is not supported.
|
System
Bus |
- 1333 / 1066 / 800 MHz system bus
|
|
|
Memory Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB of memory (Dual
Channel)
|
Memory
Type |
- DDR2 800/667MHz unbuffered ECC / non-ECC
SDRAM, 240-pin gold-plated DIMMs
|
DIMM
Sizes |
- 256 MB, 512 MB, 1 GB, 2GB, 4GB
|
Memory
Voltage |
|
|
|
Chipset |
- Intel 3210 chipset
- ICH9 +2x Intel® 82574L + LSI 1068E
|
SAS |
- LSI SAS1068E
- RAID 0, 1, 10
support
- (Optional:
AOC-IButton68) RAID 5 support
|
Serial
ATA |
- Intel® ICH9 SATA2 (3 Gbps) controller
built-in
|
IPMI |
- On board IPMI with dedicated LAN
- Support for Intelligent Platform Management
Interface v.2.0
- IPMI 2.0 with virtual media over LAN and
KVM-over-LAN support
- Winbond® WCPM450
|
Network Controllers |
- 2x Single-port Gigabit PCI-Express Ethernet
Controllers
- Intel® 82574L
- Supports 10BASE-T, 100BASE-T, 1000BASE-T,
RJ45 output
|
VGA |
- On-board Winbond® integrated Graphics
|
Super
I/O |
|
Clock
Generator |
|
|
|
SAS |
|
Serial
ATA |
- Two Serial ATA ports (3 Gbps performance)
- Two SATA hard drives supported
|
Floppy |
- 1 Floppy controller; 1.44 MB
|
LAN |
|
USB |
- Up to 8x USB 2.0 / 1.1 compliant ports
- 2 rear ports
- 2 internal headers + 2 on-board
|
VGA |
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
Serial
Ports |
- 1x Fast UART 16550 serial port
- 1x internal header
|
|
|
BIOS
Type |
- 16Mb Flash EEPROM with Phoenix BIOS®
|
BIOS
Features |
- Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0/2.0
- SMBIOS 2.3
- USB Keyboard support
|
|
|
|
|
Form
Factor |
|
Model |
|
|
|
Height |
|
Width |
|
Depth |
|
Gross
Weight |
|
Available Colors |
|
|
|
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power status LED
- HDD activity LED
- 2x Network activity LEDs
|
|
|
PCI-Express |
|
|
|
Hot-swap |
- 8x 2.5" Hot-swap SAS / SATA drive bays
|
|
|
1x SAS / SATA
Backplane |
|
|
|
Fans |
- 4x 40x28mm high-efficiency fans
- 6x fans maximum
|
|
|
560W AC to DC
power supply w/ PFC |
AC
Voltage |
- 100-240 V, 50-60 Hz, 6.5-2.6 Amp
|
+5V |
|
+5V
standby |
|
+12V |
|
-12V |
|
+3.3V |
|
Certification |
Silver Certified
[
Test Report ]
|
|
|
CPU |
- Monitors for CPU Cores ( +1.8V, +3.3V, +5,
±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset)
- CPU Core 4-Phase-switching voltage
regulator with auto-sense from 0.3750V-1.6000V
- Adjustable CPU clock frequency ratio
|
FAN |
- Total of six 4-pin fan headers
- 6x fans with tachometer monitoring
- Status monitor with firmware / software
speed control
- Status monitor for on/off control
- Support 3-pin fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- Thermal Monitor (TM2) Support
- PECI
|
LED |
- CPU / System Overheat LED
- +5 Standby alert LED
|
Other
Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|
|
RoHS
|
|
Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to
95°F)
- Non-operating Temperature: -40°to 70°C
(-40°to 158°F)
- Operating Relative Humidity: 8% to 90%
(non-condensing)
- Non-operating Relative Humidity: 5 to 95%
(non-condensing)
|
|
New Page 1
|
|
Part Number |
Qty |
Description |
Motherboard / Chassis |
MBD-X7SB3-F
CSE-113MTQ-560CB |
4
1 |
Super X7SB3-F Motherboard
1U Black Chassis |
Air Shroud |
MCP-310-00029-01 |
1 |
1U Air Shroud |
Backplane |
BPN-SAS-113TQ |
1 |
Sup 8x2.5" Hot-swap SAS/SATA hdd; SATA con |
Cable 1 |
CBL-0044L |
1 |
SATA CABLE 61CM FLAT S-S PBF. 26AWG flat |
Cable 2 |
CBL-0157L |
2 |
8 pin to 8 pin ribbon SGPIO cable with tube ,
40cm, PBF |
Cable 3 |
CBL-0190L |
2 |
SATA SET OF 4-43/33/26/22CM ROUND S-S, PBF.
26AWG |
Cable 4 |
CBL-0206L |
1 |
48CM SATA ROUND S-S PBF. 26AWG |
CD |
CDR-X7-UP |
1 |
DRIVER CD FOR X7 UP MOTHERBOARDS |
Riser Card |
RSC-RR1U-E8 |
1 |
RSC-RR1U-E8 (Rev 4.00) |
Heatsink / Retention |
SNK-P0016P |
1 |
CPU HS FOR INTEL PD AND PD+ PROCESSORS |
Power Supply |
PWS-562-1H |
1 |
560W MULTIPLE OUTPUT W/HARNESS STD 24PIN |
Cable 5 |
CBL-0335L |
1 |
FRONT CTL CABLE 20 PIN TO 20 PIN
W/TUBE,70CM,PBF. 28AWG |
Fan 1 |
FAN-0065L4 |
4 |
4028mm 13K RPM 4-PIN PWM FAN for SC813MF,
SC113M |
Mounting Rails |
CSE-PT52L |
1 |
Sliver chassis rail set for SC813M,515,113M |
Drive Tray(s) |
MCP-220-00047-0B |
8 |
Hot-swappable Hard Drive Tray (B =
Black) |
|
|
|
|
|
|
|
Key Features
New Page 1
1. Intel® Xeon® 3200 Series,
Xeon® 3000 Series in LGA775
Package (FSB 1333/1066/800)
2. Up to 8GB unbuffered ECC / non-ECC
DDR2 800/677 SDRAM
3. 1 (x8) PCI-Express Slot
4. Intel® Dual 82574L PCI-e Gigabit
Controllers
5. On board Winbond® integrated
Graphics 6. 8 x 2.5" Hot-swap SAS Drive
Trays
7. 560W 85%+ High-efficiency Power Supply
8. On board IPMI with dedicated LAN
|
|
|
|
|
|
|