|
|
|
|
|
| SYS-5035B-TB | - SuperServer 5035B-TB (Black)
|
| |
| CPU | - Single LGA775 Socket
- Supports an Intel® Core™2 Extreme QX9000/QX6000 series processor (Exhaust Fan, FAN-0055, is required)
- Supports an Intel® Core™2 Quad Q9000/Q6000 series processor
- Supports an Intel® Core™2 Duo E8000/E7000/E6000/E4000 seriesprocessor
- Supports an Intel® Pentium® dual-core E2000 series processor
- Supports an Intel® Celeron® dual-core E1000 series processor
- Supports an Intel® Celeron® 400 series processor
| System Bus | - 1333 / 1066 / 800 MHz system bus
|
| |
| Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered, non-ECC DDR3 1333/1066/800MHz memory (Dual Channel)
| Memory Type | - DDR3 1333/1066/800MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs
| DIMM Sizes | - 256 MB, 512 MB, 1 GB, 2 GB
| Memory Voltage | |
| |
| Chipset | | Serial ATA | - Intel® ICH9R SATA2 (3 Gbps) controller built-in
- RAID 0, 1, 5, 10 support (Windows Only)
| Network Controllers | - 1x Intel® 82566 Gigabit PCI-Express Ethernet
- Supports 10 BASE-T, 100 BASE-TX, and 1000 BASE-T with RJ45 output
| Audio | - High Definition 7.1 Channel Audio
| Super I/O | | Clock Generator | |
| |
| PCI-Express | - 2 (x16) PCI-e 2.0 slot
- 1 (x1) PCI-e slot
| PCI-X | - 2x 64-bit 133 / 100MHz PCI-X (3.3V) slots
| PCI | - 2x 32-bit 33MHz PCI (5V) slots
|
| |
| Serial ATA | - Six Serial ATA ports (3 Gbps performance)
- Six SATA hard drives supported
| IDE | - One EIDE channel supports up to two UDMA IDE devices
- ITE8213F chipset
| Floppy | - 1 Floppy controller; 1.44 MB
| LAN | | USB | - 12x USB 2.0 / 1.1 compatible
- 6 rear + 2 Type A connectors + 2 headers ( 4 ports )
| Audio | - High Definition 7.1 Channel Audio
- Line-in / Line-out / Microphone Ports
| Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Ports | - 2x Fast UART 16550 serial ports
| Parallel Port | - 1x ECP / EEP Parallel Port
| Firewire | - 1x Firewire IEEE 1394 Port
|
| |
| BIOS Type | - 16Mb Flash EEPROM with SPI BIOS®
- Winbond W39V080FAP
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| | | |
| Height | | Width | | Depth | | Weight | | Available Colors | |
| |
| Buttons | - Power On/Off button
- System Reset button
| LEDs | - Power LED
- Hard drive activity LED
- Network activity LED
- System Overheat LED
| Ports | - 2x Front side USB ports (USB 2.0 ready)
|
| |
| Hot-swap | - 4x 3.5" SATA hot-swap drive bays
| Peripheral Bay | - 2x 5.25" peripheral drive bay
- 1x 3.5" bay for floppy drive
|
| |
| Floppy | - Teac Floppy Drive 3.5" 1.44MB (Optional)
|
| |
| Fans | - 1x 9.2cm Front Thermal Fan
|
| |
| 4 x 3.5" SATA Backplane |
| |
| 465W AC power supply w/ PFC | AC Voltage | - 100 - 240V, 50-60Hz, 6-3 Amp
| +5V | | +5V standby | | +12V | | -12V | | +3.3V | | Certification | Certified |
| |
| CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT, HT, Memory, Chipset
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
- Adjustable CPU clock frequency ratio
| FAN | - Total of five 4-pin fan headers
- 5 x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on / off control
- Support 3-pin PWM fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) Support
- PECI
| LED | - CPU / System Overheat LED
- Suspend-state indicator LED
- +5V standby alert LED
| Other Features | - Chassis intrusion Detection
- Chassis intrusion Header
|
|
|
| | Part Number | Qty | Description | Motherboard / Chassis | MBD-C2SBX-O CSE-733TQ-465B | 1 1 | Super C2SBX Motherboard Mid-Tower SC733T-465 Chassis (B = Black) | Backplane | CSE-SAS-733TQ | 1 | 4 x 3.5" SAS / SATA Backplane with SES-II | Cable(s) | CBL-0049L CBL-0061L CBL-0084 CBL-0157LCBL-0173L | 1 4 1 11 | 16-pin to 16-pin Front Cable 35cm SATA Cable 6" 16-pin Front Control Split Convertor 8-pin to 8-pin Ribbon Cable for SGPIOInternal to External 1394 Connector | Drive Tray | CSE-PT39-B0 | 4 | Hot-swap Drive Tray for SC733 | Power Supply | PWS-465-PQ | 1 | 465W Low Noise Power Supply | Rear I/O | MCP-260-00001-00 | 1 | I/O Shield |
|
| | | |
| | Part Number | Qty | Description | Fan(s) | FAN-0077L4 | 1 | 12cm Thermal Fan | Heatsink / Retention | - | - | Please refer to our Thermal Components Matrix | Peripheral Drives | FPD-TEAC-02 | 1 | TEAC Black 3.5" 1.44MB Floppy Drive |
|
|
| |
|
|
|
|
|
|
|
Key Features
1. Intel® Core 2 Duo / Quad and Extreme processors in LGA775 Package (FSB 1333/1066/800)2. Up to 8GB dual channel unbuffered, non-ECC DDR3 1333/1066/800 SDRAM3. 2 (x16) PCI-Express 2.0, 1 (x1) PCI-e, 2x 64-bit 133 / 100MHz PCI-X, 2x 32-bit PCI, 1x Rear Firewire 1394 Port (& 1x Firewire 1394 header onboard)4. 1x Intel® 82566 PHY PCI-e Gigabit LAN Port5. 4 x Hot-swappable SATA Hard Drive Bays6. 465W High-Efficiency, Low-noise Power Supply
|
|
|
|
|
|
|