 |
|
MBD-X9DRW-7TPF+ -P |
- X9DRW-7TPF+ (Motherboard Only)
|
| |
|
|
| Form
Factor |
|
|
Dimensions |
- 12.8" x 16.5" (32.5cm x 41.9cm)
|
| |
|
|
| CPU |
- Intel® Xeon® processor E5-2600
and future E5-2600 v2 family
(up to 135W TDP **)
- Dual Socket R (LGA 2011)
|
| Cache |
|
| System
Bus |
|
|
|
** Motherboard
supports this maximum TDP. Please verify your system can
thermally support.
|
| |
|
|
| Memory
Capacity |
- 24x 240-pin DDR3 DIMM sockets
- Supports up to 768 GB DDR3 ECC Registered
memory (RDIMM) in 24 DIMM sockets
- Supports up to 128 GB DDR3 ECC/non-ECC
Un-Buffered memory (UDIMM) in 24 DIMM sockets
|
| Memory
Type |
- 1600/1333/1066/800MHz ECC DDR3 SDRAM
72-bit, 240-pin gold-plated DIMMs
- Support ECC and non-ECC UDIMMs
|
| DIMM
Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
| Memory
Voltage |
|
| Error
Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC
memory)
|
| |
|
|
|
Chipset |
|
| SATA |
- SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
- SATA 3.0 6Gb/s with RAID 0, 1, 5, 10
|
| SAS |
- SAS2 from LSI 2208 (1GB cache)
- HW RAID 0, 1, 5, 6, 10, 50, 60 support
- Supports up to 16 devices
|
| IPMI |
- Support for Intelligent Platform Management
Interface v.2.0
- IPMI 2.0 with virtual media over LAN and
KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
|
Network Controllers |
- Intel® 82599 Dual Port 10G SFP+
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O
overhead
- Supports 10G SFP+, 100BASE-TX, and
1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Video |
- G200 (Nuvoton WPCM450 BMC w/ graphic
controller)
|
| |
|
|
| SATA |
- 2 SATA 3.0 ports (6Gb/s)
- 4 SATA 2.0 ports (3Gb/s)
|
| SAS |
|
| LAN |
- 2 SFP+ 10GbE LAN ports
- 2 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
- 7 USB 2.0 ports total
(2 rear + 4 via header + 1 Type A)
|
| Video |
|
|
Keyboard/Mouse |
- 1 Combo Keyboard/Mouse PS/2 port
|
| Serial
Port / Header |
- 1 Fast UART 16550 port / 1 Header
|
| TPM |
|
|
 |
|
|
|
|
| 1U
Chassis |
|
| 2U
Chassis |
|
|
Important Chassis Notes |
- To support the new generation Intel® Xeon®
processor-based motherboards, Revision M
chassis is recommended. Please talk to your sales
representative for details.
- Please order the optional I/O shield (2 LAN
+ 2TG) separately if the order is not bulk.
|
| |
|
|
|
PCI-Express |
- Left hand riser: 1 PCI-E 3.0 (x32)
- Right hand riser: 1 PCI-E 3.0 (x16)
|
| |
|
|
| BIOS
Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS
Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| |
|
|
|
Software |
|
| Power
Configurations |
- ACPI / APM Power Management
- Power-on mode for AC power recovery
|
| |
|
|
|
Voltage |
- Monitors for CPU Cores, +1.1V, +1.5V,
+3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory
Voltages.
- 5+1 Phase-switching voltage regulator
|
| FAN |
- 6x 4-pin fan headers (up to 6 fans)
- 6x fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 6x Fan Connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote UID
|
| Other
Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
- RoHS
|
| |
|
|
|
|
|
Operating Temperature Range |
- 10°C - 35°C (50°F - 95°F)
|
|
Non-Operating Temperature Range |
- -40°C - 70°C (-40°F - 158°F)
|
|
Operating Relative Humidity Range |
- 8% - 90% (non-condensing)
|
|
Non-Operating Relative Humidity Range |
- 5% - 95% (non-condensing)
|
|