 |
 |
 |
|
|
 |
| MBD-PDSML-LN2-O |
- PDSML-LN2 (Standard Retail Pack)
|
| MBD-PDSML-LN2-B |
|
| |
|
|
| Form Factor |
|
| Dimensions |
- 9.6" width x 9.6 " length , (24.4cm x 24.4cm), 6 layers
|
| |
|
|
| CPU |
- Single LGA775 ZIF Socket
- Supports an Intel® Pentium® D (Smithfield Dual Core) processor
- Supports an Intel® Pentium® Extreme Edition processor
- Supports an Intel® Pentium® 4 processor up to 3.8GHz
- Supports an Intel® Pentium® 4 Extreme Edition processor up to 3.73GHz
- Supports an Intel® Celeron® D processor with 256KB L2 Cache up to 3.06GHz
- Hyper-Threading (HT) capable
- 2MB / 1MB L2 Cache
- Will not support E2000 processors
|
| System Bus |
- 1066 / 800 / 533 MHz system bus
|
| |
|
|
| Memory Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered ECC / non-ECC 533/667MHz memory
|
| Memory Type |
- DDR2 667/533MHz unbuffered ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2GB
|
| Memory Voltage |
|
| |
|
|
| Chipset |
- Intel E7230 (Mukilteo) Smithfield chipset
- ICH7R + Intel® 82573V/L
|
| Serial ATA |
- Intel® ICH7R SATA2 (3 Gbps) controller built-in
- Intel:
RAID 0, 1, 5, 10 support (Windows Only) - Adaptec:
RAID 0 (Two, three, four drives only)
RAID 1 (Two hard drives only)
|
| IPMI |
|
| Network Controllers |
- 1x Intel® 82573V Gigabit PCI-Express Ethernet
- 1x Intel® 82573L Gigabit PCI-Express Ethernet
- Supports 10Base-T, 100Base-TX, 1000BASE-TX, RJ45 output
|
| VGA |
- On-board XGI XG20 graphics, 16MB DDR video memory
|
| Super I/O |
|
| Clock Generator |
|
| |
|
|
| Serial ATA |
- Four Serial ATA ports (3 Gbps performance)
- Four SATA hard drives supported
|
| IDE |
- One EIDE channel supports up to two UDMA IDE devices
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
|
| USB |
- 6x USB 2.0 compliant / 1.1 compatible
- 4x internal USB headers
- 2x rear ports
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1x Fast UART 16550 serial port
- 1x Header
|
|
|
SC733T-645
 |
|
|
| 1U |
- SC811T-300 (Do not use riser card bracket with IPMI card)
- SC513F-260 (OEM and SuperServer only)
- SC512F-260 (OEM and SuperServer only)
- SC813MFT-300 (OEM and SuperServer only)
- CSE-510-200B
|
| 4U / Tower |
|
| Important Note |
- Only Supermicro 1U chassis is recommended for 1U Building Block Solutions
|
| |
|
|
| PCI-Express |
- 1 (x4) PCI-e slot
- 1 Universal [1 (x8) PCI-Express or 1x 32-bit 33MHz PCI ] slot
|
| PCI |
- 1x 32-bit 33MHz PCI (5V) slot
|
| IPMI |
|
| |
|
|
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix BIOS®
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- ACPI 1.0 (limited)
- USB Keyboard support
- SMBIOS 2.3
|
| |
|
|
| Software |
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- SuperDoctor® III
- Watch Dog
|
| Power Configurations |
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
|
| |
|
|
| Voltage |
- Monitors for CPU Cores +1.8V, +3.3V, +5V, ±12V, +5V Standby
- CPU 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
|
| FAN |
- Total of six 4-pin fan headers
- 6 fans with tachometer monitoring
- Status monitor with firmware speed control
- Low noise fan speed control
- Status monitor for on/off control
- Support 3-pin fans (without speed control)
- Pulse Width Modulated (PWM) fan connector
|
| Temperature |
- Monitoring for CPU and chassis environment
- Thermal Monitor 2 (TM2) support
- CPU Thermal Trip support
|
| LED |
- +3.3V Standby Alert LED
- CPU / system overheat LED
|
| Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
|
RoHS
|
|
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
| |
|
|
| FCC |
- Passed to meet FCC standard requirement
| |
|
|
| |
Part Number |
Qty |
Description |
| PDSML-LN2 |
MBD-PDSML-LN2-O |
1 |
PDSML-LN2 Motherboard |
| Manual(s) |
MNL-0839 |
1 |
Motherboard Manual for PDSML-LN2 |
| I/O Cables |
CBL-0022L
CBL-0036L-03
CBL-0044L |
1
1
4 |
ATX Floppy Cable
ATA 66/100 IDE LP Cable
SATA Cable (2Ft.) |
| Driver Disk |
CDR-PD |
1 |
Version 1.21 (or newer) CD |
| I/O Shield |
CSE-PT07L |
1 |
I/O Shield for PDSML-LN2 |
|
|
|
|
|
|
| |
Part Number |
Qty |
Description |
| Heat Sink |
SNK-P0016 |
- |
1U, Pentium® D LGA775, Passive Heatsink |
| Riser Card |
RSC-RR1U-32L
RSC-RR1U-E8 |
-
- |
1U 32-bit PCI Riser Card for PDSML-LN2 (Full height, full length)
1U Universal (SXB-E) Slot to PCI-E Slot Riser Card for PDSML-LN2 |
|
|
|
|
|
 |
|
 |
|
Key Features
Key Features
1. Intel® Pentium® D, Pentium® 4
Extreme Edition, Pentium 4, Pentium
Extreme Edition & Celeron D
in LGA775 Package(FSB 1066/800/533)
2. Intel® E7230 (Mukilteo) Chipset
3. Up to 8GB unbuffered ECC / non-ECC
DDR2 667/533 SDRAM
4. 1x Intel® 82573L PCI-e Gigabit LAN
1x Intel® 82573V PCI-e Gigabit LAN
5. Built-in SATA ICH7R Controller
4x SATA (3 Gbps) Drive with
RAID 0, 1, 5, 10 Support
6. 1 (x4) PCI-Express,
1 Universal [1 (x8) PCI-Express, or
1x 32-bit 33MHz PCI] slot,
1x 32-bit 33MHz PCI
7. On board XGI XG20 Graphics with
DDR 16MB video memory
8. 1U IPMI 2.0
|
|
|
|
|
|
|