| Product SKUs |
| SYS-5019S-ML | SuperServer 5019S-ML (Black) |
| Motherboard |
| Motherboard | Super X11SSH-F |
| Processor/Cache |
| CPU | - Single Socket H4 (LGA 1151) supports:
- Intel® Xeon® processor E3-1200 v5, Intel® 6th Gen Core™ i3
- CPU TDP up to 80W
|
| System Memory |
| Memory Capacity | - 4x 288-pin DDR4 DIMM slots
- Up to 64GB DDR4 ECC UDIMM
|
| Memory Type | 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs |
| DIMM Sizes | 16GB, 8GB, 4GB |
| Memory Voltage | 1.2 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| On-Board Devices |
| Chipset | Intel® C236 chipset |
| SATA | - SATA3 (6Gbps) via C236 controller
- RAID 0, 1, 5, 10 support
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Controllers | - Dual Intel® I210-AT Gigabit Ethernet LAN ports
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Video | ASPEED AST2400 BMC |
| Expansion Slots |
| PCI-Express | - 1x PCI-E 3.0 x8 AOC slot
- 1x M.2 connector
|
| Input / Output |
| SATA | 2x SATA3 (6Gbps) ports |
| LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Shared IPMI LAN port
|
| USB | - 2x USB 3.0 ports (rear)
- 2x USB 2.0 ports (rear)
|
| Video | 1x VGA port |
| Serial Port / Header | 1x COM ports (1 rear) |
| SuperDOM | 2x SuperDOM (Disk on Module) ports with built-in power |
| System BIOS |
| BIOS Type | 8MB SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| PC Health Monitoring |
| Voltage | Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. |
| FAN | - Total of 4 fan headers supporting up to 4 fans
- 2 fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote UID
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- Chipkill support
- RoHS, Halogen Free
|
| Chassis |
| Form Factor | 1U Rackmount |
| Model | CSE-512F-350B1 |
| Dimensions and Weight |
| Height | 1.7" (43mm) |
| Width | 17.2" (437mm) |
| Depth | 14.4" (366mm) |
| Package | 6.1" (H) x 25.4" (W) x 19.8" (D) |
| Weight | - Gross Weight: 16 lbs (7.3 kg)
- Net Weight: 10.5 lbs (4.8 kg)
|
| Available Colors | Black |
| Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Information LED (temp., status)
|
| Drive Bays |
| Fixed | 2x 3.5" or 3x 2.5" (option) internal drive bays |
| System Cooling |
| Fans | 2x 4cm counter-rotating mid fans |
| Power Supply |
| Power Supply | 350W AC power supply w/ PFC |
| AC Voltage | 100-240 V, 50-60 Hz, 4.2-1.8 Amp |
| +5V | Max.: 15 Amp Min.: 0.2 Amp |
| +5V standby | Max.: 3 Amp Min.: 0 Amp |
| +12V | Max.: 29 Amp Min.: 0.5 Amp |
| -12V | Max.: 0.2 Amp Min.: 0 Amp |
| +3.3V | Max.: 12 Amp Min.: 0.2 Amp |
| Certification | 80 Plus Platinum Level Certified |
| Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Spec. | - Operating Temperature: 10°C to 35°C (50°F to 95°F)
- Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5% to 95% (non-condensing)
|