|
 | | SYS-5015M-Ni | - SuperServer 5015M-Ni (Beige)
| | SYS-5015M-NiB | - SuperServer 5015M-NiB (Black)
|
| | |
| | CPU | - Single LGA775 ZIF Socket
- Supports a Quad-Core Intel® Xeon® 3200 series processor
- Supports a Dual-Core Intel® Xeon® 3000 series processor
- Supports a Quad-Core Intel® Core™2 Extreme series processor
- Supports an Intel® Core™2 Quad series processor
- Supports an Intel® Core™2 Duo series processor
- Supports an Intel® Pentium® processor E2000 series
- Supports a Dual-Core Intel® Pentium® D processor
- Supports an Intel® Pentium® Extreme Edition processor
- Supports an Intel® Pentium® 4processor
- Supports an Intel® Celeron® processor E1000 series
- Supports an Intel® Celeron® processor 400 series
- NOTE: This board DOES NOT support Q9000, E8000, E7000, E5000 series or 45nm processor
| | System Bus | - 1066 / 800 / 533 MHz system bus
|
| | |
| | Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of memory (Single / Dual Channel)
| | Memory Type | - DDR2 667/533MHz unbuffered, ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 256 MB, 512 MB, 1 GB, 2GB
| | Memory Voltage | |
| | |
| | Chipset | - Intel 3010 (Mukilteo-2P) chipset
- ICH7R + PXH + Intel® 82573V + Intel® 82573L
| | Serial ATA | - Intel® ICH7R SATA controller built-in (3 Gbps)
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support
- SIMSO Slot - Supermicro Intelligement Management
- (Optional: AOC-SIMSO+)
- NOTE: Must use Dedicated LAN for IPMI function
| | Network Controllers | - 2x Single-port Gigabit PCI-Express Ethernet Controllers
- Intel® 82573V + Intel® 82573L
- Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
| | VGA | - On-board ATI ES1000 (16MB) graphics
| | Super I/O | | | Clock Generator | |
| | |
| | Left Slot | - 2 (x8) PCI-Express Slot (via Riser Card)
(Full-height / Full-length)
| | UNiersal Slot | - 1 (x4) PCI-Express (in PCI-E x8 Slot)
(Low-profile)
|
| | |
| | Serial ATA | - Four Serial ATA ports (3 Gbps performance)
- Four SATA hard drives supported
| | IDE | - One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB
| | LAN | | | USB | - Up to 6x USB 2.0 / 1.1 compliant ports
- 2 rear ports
- 2 internal header for 4 USB 2.0/1.1 ports
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1x Fast UART 16550 serial port
- 1x internal header
|
|  | | |
| | Form Factor | | | Model | |
| | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | |
| | |
| | Buttons | - Power On/Off button
- System Reset button
- UID button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- Universal Information LED
|
| | |
| | Hot-swap | |
| | |
| | Fans | |
| | |
| | 280W AC power supply w/ PFC | | AC Voltage | - 100 - 240V, 50 - 60Hz, 5Amp
| | +5V | | | +5V standby | | | +12V | - 23Amp @ 100-140V, 27Amp @ 180-240V
| | -12V | | | +3.3V | |
| | |
| | CPU | - Monitors for CPU Cores (+1.5V, +1.8V, +3.3V, +5, ±12V, +5V Standby, VBAT)
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
| | FAN | - Total of six 4-pin fan headers
- 6x fans with tachometer monitoring
- Status monitor with firmware / software speed control
- Status monitor for on/off control
- Support 3-pin fans (with speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- Thermal Monitor (TM2) Support
- PECI
| | LED | - CPU / System Overheat LED
- Standby alert LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| | |
| | BIOS Type | - 8Mb Flash EEPROM with Phoenix BIOS®
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- SMBIOS 2.3
- USB Keyboard support
|
|