|
SYS-6024H-32 |
- SuperServer 6024H-32 (Beige)
|
|
|
CPU |
- Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit
Xeon® processor(s) of the same type below:
-
Xeon Dual
Core (Paxville) CPU
with 2x2MB L2
Integrated Advanced
Transfer Cache
-
Xeon
(Nocona) CPU
with 1MB L2
Integrated Advanced
Transfer Cache, up
to 3.60 GHz
-
Xeon (Irwindale)
CPU with
2MB L2 Integrated
Advanced Transfer
Cache, up to 3.80
GHz
-
Xeon LV (Low
Voltage) CPU,
up to 2.8 GHz
|
System
Bus |
|
Operating System Software |
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
|
|
Memory
Capacity |
- Eight 240-pin DIMM sockets
- Supports up to 16 GB DDR2 400MHz memory
- Dual channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+
DIMM support
|
Memory
Type |
- DDR2 400MHz buffered (registered) ECC SDRAM
72-bit, 240-pin gold-plated DIMMs
|
DIMM
Sizes |
|
Memory
Voltage |
|
Error
Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC
memory)
- Supports Intel® x4 Single Device Data
Correction (SDDC)
|
|
|
Chipset |
- Intel® E7520 chipset
- MCH + 6300ESB + PXH/V + 82541PI
|
SAS |
- Adaptec AIC9410: Adaptec 8-port SAS
Controller
- RAID 0, 1, 10, JBOD support
|
SATA |
- 6300ESB 2-port SATA Controller
|
SAS
ZCR |
- RAID 0, 1, 5, 10, and JBOD support
- Support for Zero-Channel RAID
- Optional Card not included
|
IPMI |
|
Network Controllers |
- Dual Intel® 82541PI Single-Port Gigabit
Controller
|
Graphics |
- ATI Rage XL SVGA PCI video controller with
8 MB of video memory
|
Super
I/O |
|
|
|
Serial
ATA / SAS |
- Two SAS connectors support up to 8 SAS or
SATA drives
- Two SATA connectors support 2 SATA drives
|
IDE |
- Dual EIDE channels support up to four UDMA
IDE devices
- Supports ATA/100
|
Floppy |
- 1 Floppy controller; 1.44 MB, 2.88 MB,
3-mode support
|
LAN |
|
USB |
- 2x USB rear ports
- 2x USB internal headers
- USB 2.0 Compliant / 1.1 Compliant
|
VGA |
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
Serial
Ports |
- 1 Fast UART 16550 serial ports
- 1 header
|
|
|
|
|
Height |
3.5" (89mm) |
Width |
16.8" (426mm) |
Depth |
25.6" (650mm) |
Gross Weight |
51 lbs (23.1kg) |
Available Colors |
Beige, Black |
|
|
Buttons |
• Power On/Off
button
• System Reset button
|
LEDs |
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
|
Ports |
2x USB Ports
(optional) |
|
|
PCI-Express |
|
PCI-X |
- 1x 64-bit 133MHz PCI-X (3.3V) slot
- 2x 64-bit 100MHz PCI-X (3.3V) slots
|
PCI |
|
|
- (Low-profile Add-on Cards Only)
|
|
|
Hot-swap |
6x 3.5"SATA
Hot-swap drive trays |
Peripheral
Bay(s) |
1x 5.25"
full-height peripheral bay |
|
|
CD-ROM |
TEAC Slim 24x
CD-ROM drive |
Floppy |
3.5" 1.44MB Floppy
Drive |
|
|
1x 2U SAS
Backplane (without SESII) |
|
|
Fans |
4x 80mm 6300 RPM
fans
Cooling redundancy with fan shroud |
|
|
550W power
supply with PFC
[ 24-pin, (8-pin, 4-pin)=12V ] |
AC
Voltage |
- 100 - 240V, 47-63Hz, 9/3.5 Amp
|
DC
Output |
|
+5V |
|
+5V
standby |
|
-5V |
|
+12V |
|
-12V |
|
+3.3V |
|
|
|
BIOS
Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
BIOS
Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- ACPI 1.0
- Fan Speed Control
|
|
|
CPU |
- Monitors for CPU Cores, CPU0, CPU1, +3.3V,
+5V, ±12V
|
FAN |
- Total of four 4-pin fan headers and four
3-pin fan headers
- 8x fans with tachometer status monitoring
- Low noise fan speed control
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
|
Other
Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|