Supermicro 4U Server SYS-F647G2-FTPT+ Dual socket R LGA 2011 for Intel Xeon processor E5-2600 IPMI 2.0 with KVM and Dedicated LAN Intel Intel i350-AM2 Dual port GbE LAN 4x Hot-swap 2.5" SATA3 Drive Bays 1600W Redundant Power Supplies Full Warranty

Home >

Supermicro SYS-F647G2-FTPT+ Barebone 4U w/ 2 nodes F/ E5-2600/2600v2

Price: $7,320.99

Membership Price (5% off): $6,954.94

Qty:

Key Features

Technical Specs


Processor/Cache

CPU	Dual Socket R (LGA 2011) Intel® Xeon® processor E5-2600 and E5-2600 v2 family^† (up to 130W TDP)
Note	† BIOS version 3.0 or above is required
Cache	Up to 30MB
System Bus	QPI up to 8 GT/s


System Memory (per node)

Memory Capacity	16x 240-pin DDR3 DIMM sockets Up to 1TB DDR3 ECC LRDIMM Up to 512GB DDR3 ECC Registered memory (RDIMM) Up to 128GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type	1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	64GB, 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage	1.5 V, 1.35 V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)


On-Board Devices

Chipset	Intel® C602 Chipset
AHCI SATA	SATA2 (3Gbps) with RAID 0, 1, 5, 10 SATA3 (6Gbps) with RAID 0, 1
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC
Network Controllers	Intel® X540 Dual Port 10GBase-T Virtual Machine Device Queues reduce I/O overhead Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201F PHY (dedicated IPMI)
Graphics	Matrox G200eW


Input / Output (per node)

AHCI SATA	2x SATA 3.0 ports (6Gbps) 4x SATA 2.0 ports (3Gbps)
LAN	2x RJ45 10GBase-T ports 1x RJ45 Dedicated IPMI LAN port
USB	2x USB 2.0 ports
VGA	1x VGA port
Serial Port / Header	1x Fast UART 16550 port


Dimensions

Width	17.63" (448mm)
Height	6.96" (177mm)
Depth	35" (889mm)
Weight	Net Weight: 105 lbs (47.63 kg) Gross Weight: 150 lbs (68.04 kg)
Available Colors	Black


Front Panel

Buttons	Power On/Off button UID button
LEDs	Power status LED System Overheat / Power Fail LED UID LED


Expansion Slots (per node)

PCI-Express	6x PCI-E 3.0 x16 FH, FL slots (support 6x Double-width GPU/Xeon Phi) 2x PCI-E 3.0 x8 FH, HL slots


System Cooling

Fans	8x 8cm heavy duty fans with air shroud and PWM fan speed control


Switching Power Supply
2000W Redundant Power Supplies with I²C & PMBus
AC Input	1100W Output @ 100-120V, 12.7-10.5A, 50-60Hz 1400W Output @ 120-140V, 13.5-11.5A, 50-60Hz 1800W Output @ 200-220V, 10.0-9.5A, 50-60Hz 1980W Output @ 220-230V, 10.0-9.8A, 50-60Hz 2000W Output @ 230-240V, 10.0-9.8A, 50-60Hz
5Vsb	4A
I²C Remote Monitoring	FRU Data / SMBus / PMBus
Certification	Platinum Certified (Cert. in progress)


System BIOS

BIOS Type	128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	Plug and Play (PnP) APM 1.2 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 UEFI


Operating Environment / Compliance

RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

Key Features
Key Features
2 Hot-plug System Nodes in 4U
Front I/O. 6x GPU/Xeon Phi per node. Each node supports:

1. Dual socket R (LGA 2011) supports
Intel® Xeon® processor E5-2600
and E5-2600 v2 family^†

2. Up to 1TB ECC DDR3, up to
1866MHz; 16x DIMM sockets

3. 6x PCI-E 3.0 x16 for Double-width
GPU/Xeon Phi; 2x PCI-E 3.0 x8 slots

4. Front I/O ports: Dual 10GBase-T,
2x USB 2.0, and 1x VGA connector

5. Built-in Server management tool
(IPMI 2.0, KVM/media over LAN) with
dedicated LAN port

6. 6x 2.5" Hot-swap SATA HDD Bays

7. 2000W Redundant Power Supplies
Platinum Level (94%+)