|
|
|
|
Product SKUs
|
|
MBD-A2SAP-L
|
A2SAP-L
|
|
Physical Stats
|
|
Form Factor
|
Pico-ITX 2.5" SBC
|
Dimensions
|
3.9" x 2.8" (9.91cm x 7.11cm)
|
|
Processor/Cache
|
|
CPU
|
Intel® Atom® Processor E3930.
Single Socket FCBGA1296 supported, CPU TDP support 6.5W
|
Cores / Cache
|
2 cores, 2 threads / 2MB L2 cache
|
|
System Memory
|
|
Memory Capacity
|
Up to 8GB Unbuffered non-ECC SO-DIMM, DDR3-1866MHz, in 1
DIMM slot
|
Memory Type
|
DDR3L up to 1866Mhz 8GB
|
DIMM Sizes
|
2GB, 4GB, 8GB
|
Memory Voltage
|
1.35V
|
|
On-Board Devices
|
|
Chipset
|
System on Chip
|
Network Controllers
|
Dual LAN with Intel® Ethernet Controller I210IT
|
Audio
|
ALC 888S HD Audio
|
Graphics
|
Intel® HD Graphics
Dual channel 48-bit LVDS(max. resolution up to
1920x1200@60Hz), HDMI(max. resolution up to 3840x2160@30Hz)
|
|
Input / Output
|
|
SATA
|
1 SATA3 (6Gbps) port
|
LAN
|
2 RJ45 Gigabit Ethernet LAN ports
|
USB
|
2 USB 2.0 ports (2 headers),
2 USB 3.0 ports (2 rear)
|
Video Output
|
1 LVDS port, 1 HDMI port,
Dual channel 48-bit LVDS(max. resolution up to
1920x1200@60Hz), HDMI(max. resolution up to 3840x2160@30Hz)
|
Serial Port / Header
|
2 COM Ports (2 headers), RS232/422/485
|
Others
|
1 HD Audio header (Mic-in/Headphone-out) (Note: Audio
only support 0C~60C)
1 8-bit GPIO header
1 SMbus/5V SATA Power box header
1 2x4-Pin 12V DC-IN power input box header(2.0mm pitch)
1 EI/O (1 DP/HDMI, 2 PCI-E x1, 2 USB2.0, LPC, SMBus,
12Vsb 2A, 5Vsb 2.8A) (Note:A2SAP-E/-L does NOT support SATA signal)
|
|
|
Expansion Slots
|
|
PCI-E
|
1 Half size Mini-PCI-E (USB2.0 x 1,PCI-E Gen2 x 1)
1 EI/O (1 DP/HDMI, 2 PCI-E x1, 2 USB2.0, LPC, SMBus,
12Vsb 2A, 5Vsb 2.8A) (Note:A2SAP-E/-L does NOT support SATA signal)
|
M.2
|
M.2 Interface: SATA and PCI-E 2.0 x1 and USB 2.0
Form Factor: 3042, 2242
Key: B-Key
1 M.2 2242/3042 B-Key (USB2.0 x 1,PCI-E Gen2 x 1,SATA
Gen3 x 1)
|
|
System BIOS
|
|
BIOS Type
|
AMI UEFI
|
|
Management
|
|
Software
|
SuperDoctor® 5, Watchdog
|
Power Configurations
|
+12V DC Power Input
ACPI Power Management
Control of power-on for recovery from AC power loss
Force Power On by Jumper
|
|
PC Health Monitoring
|
|
Voltage
|
+1.35V, +12V, +3.3V, 3.3V standby, Memory Voltages,
System level control, System temperature, VBAT, VCGI
|
FAN
|
N/A
|
Temperature
|
CPU thermal trip support
|
LED
|
Standby alert LED
|
Other Features
|
ACPI power management, Control of power-on for recovery
from AC power loss, CPU thermal trip support for processor protection, M.2
NGFF connector, RoHS, System level control, WOL
|
|
Operating Environment
|
|
Operating Temperature Range
|
-30°C ~ 60°C (-22°F ~ 140°F)
|
Non-Operating Temperature Range
|
-40°C - 85°C (-40°F - 185°F)
|
Operating Relative Humidity Range
|
8% - 90% (non-condensing)
|
Non-Operating Relative Humidity Range
|
10% ~ 95% (non-condensing)
|
|
|
|
|
|
|
|
|
Key Features
- Up to 8GB 1866MHz DDR3L Non-ECC SO-DIMM in 1 socket
- 1 M.2 B-Key 2242/3042, 1 Half size Mini-PCI-E, 1 SATA 3.0
- 2 USB 3.0 ports (rear), 2 USB 2.0 ports (via headers), 2 COM
ports (via headers)
- Intel Atom processor E3930 (6.5W, 2C)
- Intel Goldmont microarchitecture 14nm System-on-Chip
- Dual Gigabit Ethernet LAN ports via Intel i210AT
- 1 HDMI, 1 48-bit LVDS, Intel® HD Graphic 2 independent
displays
- Supports 12V DC power input
|
|
|
|
|
|
|