Supermicro SuperServer A+ Barebone System AS-1020C-3 Dual 940-pin ZIF Sockets Supports up to two Dual-Core AMD Opteron 200 Series Two BCM5721 GbE 4 x 3.5" Hot-swap SAS / SATA Drive Trays 500W Cold-swap Power Supply RAID 0, 1, 10 Full Warranty

Home > Enterprise Servers >

Supermicro SuperServer A+ Barebone System AS-1020C-3

Alternative Views:

Our Price: $1,140.95

Product Code: AS-1020C-3

Choose Your Color

Color*:

Qty:

Description

Technical Specs

Extended Information

Dual 940-pin ZIF Sockets Supports up to two Dual-Core AMD Opteron 200 Series Two BCM5721 GbE 4 x 3.5" Hot-swap SAS / SATA Drive Trays 500W Cold-swap Power Supply RAID 0, 1, 10 Full Warranty

Product SKUs

AS-1020C-3	A+ Server 1020C-3 (Beige)
AS-1020C-3B	A+ Server 1020C-3B (Black)


Motherboard

H8DCR-3


Processor/Chipset

CPU	Dual 940-pin ZIF Sockets Supports up to two Dual-Core AMD Opteron™ 200 Series processor(s) Single CPU configurations are not recommended VRM x3
Chipset	nVidia nForce Pro 2200 (CK804) AMD 8132


System Memory

Memory Capacity	Eight 184-pin DIMM sockets Supports up to 16 GB DDR 400 MHz memory or Supports up to 32 GB DDR 333 MHz memory or Supports up to 32 GB DDR 266 MHz memory Single or Dual (recommended) channel memory support For Single CPU: Memory must be populated in CPU1 DIMMs only For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type	DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
DIMM Sizes	256 MB, 512 MB, 1GB, 2GB, 4GB**
Memory Voltage	2.5 V only
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)


On-Board Devices

SAS	Adaptec AIC-9410W SAS Controller 8 SAS Ports (4 Internal, 4 External) RAID 0, 1, 10 Zero-Channel RAID (optional)
IPMI	1U support: Intelligent Platform Management Interface v.2.0+ (Optional: 1UIPMI-B) Remote Management Module (Card not included)
Network Controllers	Two Broadcom BCM5721 Gigabit LAN / Ethernet Controllers Supports 10Base-T, 100Base-TX, and 1000Base-T, RJ45 output
Graphics	ATI Rage XL 8MB
Super I/O	Winbond 83627HG
Clock Generator	ICS8634


Input / Output

Serial Attached SCSI	Integrated Adaptec AIC-9410W(SAS) Controller Two Serial Attached SCSI (SAS) ports (1 internal, 1 external) Each SAS port supports up to 4 SAS / SATA drives for a total of up to 8 SAS or SATA hard drives
IDE	Dual EIDE channels support up to four UDMA IDE devices Supports UDMA Mode 5 Supports PIO Mode 4 Supports ATA 100/133
Floppy	1 Floppy port, 1.44 MB
LAN	2 RJ45 LAN ports
USB	FUCI Up to 4 USB Ports 2.0 Compliant, 1.1 Compatible 2 Rear Ports 2 Internal Headers
VGA	1 VGA port
Keyboard / Mouse	PS/2 keyboard and mouse ports
Serial Ports	1 Fast UART 16550 serial port 1 header


Chassis

Form Factor	1U Rackmount
Model	SC813TQ+-500


Dimensions

Height	1.7" (43mm)
Width	17.2" (437mm)
Depth	25.6" (650mm)
Gross Weight	38 lbs (17.2kg)
Available Colors	Beige, Black


Front Panel

Buttons	Power On/Off button System Reset button
LEDs	Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED
Ports	N/A


Drive Bays

Hotswap	4 x 3.5" hot-swap SCSI Drive Bays with SAF-TE


Peripheral Drives

Floppy	3.5" 1.44MB Slim Floppy Drive
CD-ROM	Slim 24x CD-ROM drive


Expansion Slots

Full-height / Half-length Slot	64-bit 133MHz PCI-X (riser card pre-preinstalled) OR PCI-E x8 (requires optional riser cardCSE-RR1U-EL)
Low-profile / Half-length Slot	64-bit 100MHz PCI-X (riser card pre-installed) OR PCI-E x8 (requires optional riser cardCSE-RR1U-ELP) Note: Dual Processors are required for correct PCI-X expansion slot operation


SAS Backplane

4 x 3.5" SAS HDD Backplane


System Cooling

Fans	4x 10,200 RPM counter rotating fans


Power Supply

Cold-swappable 500W AC power supply module with PFC [ 20-pin, (4-pin, 8-pin = 12V) ]
AC Voltage	100 - 240V, 60-50Hz, 10 Amp Max
DC Output	5V + 3.3V ≤ 160W
+5V	30.0 Amp
+5V standby	2.0 Amp
+12V	39.0 Amp
-12V	1.0 Amp
+3.3V	21.0 Amp


System BIOS

BIOS Type	8Mb Flash EEPROM with AMI® BIOS 49LF080A BIOS Chip
BIOS Features	Plug and Play (PnP) SMBIOS 2.3 DMI 2.3 ACPI 2.0 / 1.0 BIOS Rescue Hot Keys USB Keyboard Support


PC Health Monitoring

CPU	Monitors CPU Core Voltages, +1.5V, +2.5V, +3.3V, +5V, ±12V, HyperTransport Link voltage 1.2V, memory voltage 2.5V, 3.3V Standby, VBAT
FAN	Total up to 5-fan status tachometer monitoring Up to five 3-pin fan headers
Temperature	Monitoring for CPU and chassis environment CPU Thermal Trip Support I²C Temperature Sensing Logic
LED	CPU / System Overheat LED Suspend-State Indicator LED +5V Standby Alert LED
Other Features	Chassis Intrusion Header Chassis Intrusion Detection

Parts List - (Items Included)

	Part Number	Qty	Description
Motherboard / Chassis	MBD-H8DCR-3 　　 CSE-813TQ+-500(B)	1 　　 1	Super H8DCR-3 Motherboard 　　 1U SC813TQ+-500 Chassis (B = Black)
Air Shroud	CSE-PT70	1	Internal Air Shroud
Cable(s)	CBL-0097L-02	1	40cm IPass to 4 SAS/SATA Cable
Fan(s)	FAN-0083	4	10,200 RPM 9cm Cooling Fan
Heatsink Components	BKT-0004 　　 BKT-0005	2 　　 2	Heatsink Mounting Plate 　　 Heatsink Retention
Mounting Rails	CSE-PT51	1	1U Mounting Rail Kit
Peripheral Drives	FPD-TEAC-S(B) 　　 CDM-TEAC-24(B)	1 　　 1	TEAC 3.5" 1.44MB Slim Floppy Drive (B = Black) 　　 Slim 24x TEAC CD-ROM Drive (B = Black)
Power Supply	PWS-0048 　　 CSE-PT813-PD520	1 　　 1	SP502-1S Cold-Swappable 500W 1U power supply 　　 Power Distributor
Riser Card	CSE-RR1U-X 　　 CSE-RR1U-XLP	1 　　 1	1U 1-Slot 64-bit PCI-X - Left Side 　　 1U 1-Slot Low-Profile 64-bit PCI-X - Right Side
Hard Drive	CSE-PT39(B) 　　 CSE-SAS-813TQ	4 　　 1	1" Hot-swap Hard Drive Trays 　　 1U SAS/SATA Hard Drive Backplane


Optional Parts List

	Part Number	Qty	Description
Riser Card	CSE-RR1U-EL 　　 CSE-RR1U-ELP	- 　　 -	1U PCI-e Riser Card - Left side, Full-height / length 　　 1U PCI-e Riser Card - Right Side, Low-Profile
Heatsink / Retention	SNK-P0012	-	Please refer to our Thermal Components Matrix
IPMI	AOC-1UIPMI-B 　　 AOC-1UIPMI-LANG	- 　　 -	1U IPMI 2.0 Riser Card 　　 Supermicro IPMI Gigabit LAN Card (for 3rd LAN)