 |
 |
 |
|
|
 | | SYS-7046A-HR+ | - SuperServer 7046A-HR+ (Black)
|
| | |
| | CPU | - Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel®
Xeon®Processor 5600 Series (Westmere) - Intel®
Xeon®Processor 5500 Series (Nehalem-EP)
| | QPI | |
| | |
| | Memory Capacity | - 18x 240-pin DIMM sockets
- Supports up to 288GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
| | Memory Type | - 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 1GB, 2GB, 4GB , 8GB , 16GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
| | Note: | This board does not support LRDIMM memory. Please refer to HERE for list of motherboards with LRDIMM support. |
| | |
| | Chipset | - Intel® 5520 (Tylersburg) chipset
- ICH10R +2x IOH-36D
| | SATA | - Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
| | Network Controllers | - Intel® 82576 Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
| | Audio | - Realtek ALC883 7.1 HD audio
| | Super I/O | |
| | |
| | PCI-Express | - 2 (x16) PCI-E 2.0 slots
- 4 (x8) PCI-E 2.0 slots (1 in x16 slot)
- 1 (x4) PCI-E slot
|
| | |
| | Serial ATA | - 6 Serial ATA ports
- 6 SATA hard drives supported
| | IDE | - Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB
| | LAN | | | USB | - 6 USB rear ports
- 2 USB on-board
- 2 USB internal headers (4 ports)
- Total 12 USB 2.0 Compliant
| | Audio | - Realtek ALC883 7.1 HD audio
| | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header (Option)
| | IEEE 1394a | - 2 IEEE 1394a ports (1x header)
|
|  | | |
| | Form Factor | - 4U Rackmountable / Tower
- Optional Rackmount Kit (CSE-PT26)
| | Model | |
| | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | |
| | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
- Power Fail LED
| | Ports | |
| | |
| | Hot-swap | - 8x Hot-swap Drive Bays
- Supports up to 6x SATA Hard Drives
| | Peripheral Bay(s) | - 3x 5.25" Peripheral Drive Bay
|
| | |
| | SAS / SATA Backplane w/ Enclosure Management |
| | |
| | Fans | - 3x 5000 RPM Hot-Swappable Cooling Fans
- 2x 5000 RPM Hot-Swappable Rear Exhaust Fan
|
| | |
| | 1400W high-efficiency (1+1) redundant power supply with PMBus | | AC Input | - 1100W Output @ 100-140V, 13.5-9.5A, 50-60Hz
- 1400W Output @ 180-240V, 9.5-7.0A, 50-60Hz
| | DC Output | - 1100W: +12V/92A; +5Vsb/4A
- 1400W: +12V/116A; +5Vsb/4A
| | With Distributor | - +5V: 30 Amp
- +3.3V: 24 Amp
- -12V: 0.6 Amp
| | Certification | 
Gold Certified
[ Test Report ] |
| | |
| | CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
| | FAN | - Total of eight fan headers supporting up to 8 fans
- Eight 4-pin fan headers
- 8x fans with tachometer status monitoring
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control (4-pin fan only)
| | Temperature | - Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| | |
| | BIOS Type | - 32Mb SPI Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| | |
RoHS
| | | Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
| | | Part Number | Qty | Description | | Motherboard / Chassis | MBD-X8DAH+
CSE-745TQ-R1400B | 1
1 | Super X8DAH+ Motherboard
4U Chassis | | Backplane | CSE-SAS-743TQ | 1 | 743 SAS BACKPLANE W/AMI MG9072 | | Cable 1 | CBL-0061L | 6 | 35CM, SATA CABLE, PB FREE, 26AWG, flat | | Cable 2 | CBL-0157L | 2 | 8 pin to 8 pin ribbon SGPIO cable with tube , 40cm, PBF | | CD | CDR-X8 | 1 | For X8 series | |
| Heatsink / Retention * | SNK-P0040AP4 | 2 | 4U+ ACTIVE CPU HS FOR SC743 W/ X8 DP WS MB | | Power Supply | PWS-1K41P-1R | 2 | 1400W 1U GOLD LEVEL PWS W/ PM BUS & WX3 | |
| | | |
| | | Part Number | Qty | Description | | Mounting Rails | CSE-PT26 | - | Chassis Mounting Rails |
|
|
|
|
|
 |
|
 |
|
Key Features
1. Intel® Xeon® processor 5600/5500
series, with QPI up to 6.4 GT/s2. 288GB** DDR3 1333/ 1066/
800MHz ECC Registered DIMM /
48GB Unbuffered DIMM3. 2 (x16) PCI-E 2.0,
4 (x8) PCI-E 2.0 (one in x 16 slot),
1(x4) PCI-E slot4. Intel® 82576 Dual-port Gigabit
Ethernet Controller5. 8 x 3.5" Hot-swap Drives Trays
6x SATA Hard Drives Supported6. 1400W High Efficiency Redundant
Power Supply7. Tower or Rackmount
|
|
|
|
|
|
|