 |
 |
 |
|
 |
 | | | | |
 | | MBD-H8SMA-2-O | - H8SMA-2 (Standard Retail Pack)
| | MBD-H8SMA-2-B | |
| | |
| | Form Factor | | | Dimensions | - 12" x 9.6 " (30.5cm x 24.4cm)
- 6 layers
|
| | |
| | CPU | - Single 940-pin AM2 Socket
- Supports one Quad-Core AMD Opteron™ 1000 Series
(Socket AM2) processor
NOTE: Motherboard PCB revision 2.xx is needed to support quad-core processor
| | System Bus | | | Chipset | |
| | |
| | Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB DDR2 800/667/533 MHz memory
- Single or Dual (recommended) channel memory
| | Memory Type | - DDR2 800/667/533MHz un-buffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | |
| | |
| | SATA | - nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD Support
| | IDE | - Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA/100/133
| | IPMI | | | Network Controllers | - nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Super I/O | |
| | |
| | SATA | | | IDE | - Single ATA 133/100 EIDE channels support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports ATA133/100
| | Floppy | | | LAN | | | USB | - 4 USB Rear Ports
- 4 USB Internal Headers
- 8 Total USB 2.0 Compliant, 1.1 Compatible
| | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 2 Fast UART 16550 serial ports
- 1 Header
| | Parallel Port | - 1 ECP / EPP parallel port
| | Others | - 1 SATA DOM power connector
|
| | | |
| | Mid-Tower | | | 4U | | | Mid-Tower | | | Important Chassis Notes | - To ensure system stability, a 300W (minimum) ATX power supply
[4-pin (+12V) and 24-pin are required]
|
| | |
| | PCI-Express | - 1 x16 PCI-e slot
(nVidia SLI Technology Supported) - 1 x8 PCI-e using x16 slot
- 1 x4 PCI-e using x8 slot
| | PCI | - 3 PCI 32-bit, 33MHz slots
|
| | |
| | BIOS Type | - 4Mb Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- BIOS Rescue Hot Keys
- SMBIOS 2.3
- USB Keyboard support
- Hardware BIOS Virus Protection
|
| | |
| | Software | | | Power Configurations | - ACPI Power Management
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Main Switch Override Mechanism
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
|
| | |
| | CPU | - Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
- Monitor for HyperTransport voltage 1.2V, DDR termination 1.25V
- CPU switching voltage regulator
| | FAN | - Total up to five 4-pin fan headers
- 5 Fan Status Tachometer monitoring
- Status Monitor for Speed Control
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- I2C temperature sensing logic
| | LED | - CPU / Overheat LED
- Suspend-state indicator LED
- +5V Standby Alert LED
| | Other Features | - Chassis Intrusion Header
- Chassis Intrusion Detection
- Chipkill Support
|
| | |
RoHS
|
 | | Environmental Spec. | - Operating Temperature: 10?to 35?C (50?to 95?F)
- Non-operating Temperature: -40?to 70?C (-40?to 158?F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
| | |
| | FCC | |
|
|
| | |
| | | Part Number | Qty | Description | | H8SMA-2 | MBD-H8SMA-2 -O | 1 | H8SMA-2 Motherboard | | Retention | BKT-0017L | 1 | BACKPLATE FOR AMD AM2 CPU ROHS | | Retention | BKT-0018L | 1 | RETENTION MODULE FOR AMD AM2 CPU ROHS | | I/O Cable 1 | CBL-0044L | 6 | 57.5CM SATA FLAT S-S PBF | | I/O Cable 2 | CBL-010L | 1 | 9 PIN SERIAL PORT DTK CABLE, LF | | I/O Cable 3 | CBL-022L | 1 | ATX FLOPPY CABLE 3 HEADERS PB FREE | | I/O Cable 4 | CBL-036L-03 | 1 | 18" ATA 133/100/66 3-DROP TPE CABLE, PBF | | Driver Disk | CDR-A+NVDA2 | 1 | DRIVER CD FOR MCP55 CHIPSET A+ MB | | I/O Shield | MCP-260-00039-0N | 1 | STANDARD SIZE I/O SHIELD FOR X8SIA |
|
|
|
|
|
 |
|
 |
|
Key Features
Key Features
1. Single AMD® Opteron™ 1000 Series
(Socket AM2) Support,
1000 MHz HyperTransport Link2. nVidia MCP55 Pro Chipset3. Up to 8GB DDR2 800/667/533 SDRAM4. Dual-port Gigabit
LAN/Ethernet Controller5. Up to 6 SATA2 3.0 Gb/s HDD Support6. 1 (x16) PCI-Express
1 (x8) PCI-Express (using x16 slot),
1 (x4) PCI-Express (using x8 slot),
3 32-bit 33MHz PCI slots7. SIMLP IPMI 2.0 Support
|
|
|
|
|
|
|