|
|
|
|
|
MBD-PDSML-E+-O |
- PDSML-E+ (Standard Retail Pack)
|
MBD-PDSML-E+-B |
|
|
|
Form Factor |
|
Dimensions |
- 9.6" width x 9.6 " length , (24.4cm x 24.4cm), 6 layers
|
|
|
CPU |
- Single LGA775 ZIF Socket
- Supports a Quad-Core Intel® Xeon® 3200 series processor
- Supports a Dual-Core Intel® Xeon® 3000 series processor
- Supports a Quad-Core Intel® Core™2 Extreme series processor
- Supports an Intel® Core™2 Quad series processor
- Supports an Intel® Core™2 Duo series processor
- Supports an Intel® Pentium® processor E2000 series
- Supports a Dual-Core Intel® Pentium® D processor
- Supports an Intel® Pentium® Extreme Edition processor
- Supports an Intel® Pentium® 4 processor
- Supports an Intel® Celeron® processor E1000 series
- Supports an Intel® Celeron® processor 400 series
- NOTE: This board DOES NOT support Q9000, E8000, E7000, E5000 series or 45nm processor
|
System Bus |
- 1066 / 800 / 533 MHz system bus
|
|
|
Memory Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered ECC / non-ECC DDR2 667/533MHz memory (Dual Channel)
|
Memory Type |
- DDR2 667/533MHz unbuffered ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
|
DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2GB
|
Memory Voltage |
|
|
|
Chipset |
- Intel 3010 (Mukilteo-2P) chipset
- ICH7R + Intel® 82573V + Intel® 82573L
|
Serial ATA |
- Intel® ICH7R SATA2 (3 Gbps) controller built-in
- Intel:
RAID 0, 1, 5, 10 support (Windows Only)
|
IPMI |
|
Network Controllers |
- 1x Intel® 82573V Gigabit PCI-Express Ethernet
- 1x Intel® 82573L Gigabit PCI-Express Ethernet
- Supports 10Base-T, 100Base-TX, 1000BASE-TX, RJ45 output
|
VGA |
- On-board XGI Volari Z7 graphics
|
Super I/O |
|
Clock Generator |
|
|
|
Serial ATA |
- Four Serial ATA ports (3 Gbps performance)
- Four SATA hard drives supported
|
IDE |
- One EIDE channel supports up to two UDMA IDE devices
|
Floppy |
- 1 Floppy controller; 1.44 MB
|
LAN |
|
USB |
- 6x USB 2.0 compliant / 1.1 compatible
- 4x internal USB headers
- 2x rear ports
|
VGA |
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
Serial Ports |
- 1x Fast UART 16550 serial port
- 1x Header
|
|
|
|
|
Important Note |
- To ensure system stability, a 300W (minimum) ATX power supply [4-pin +12V AND (20 or 24-pin)] is recommended.
|
|
|
Universal Slot |
- 1 (x8) PCI-Express Slot OR
- 1x 32-bit 33MHz PCI Slot
|
PCI-Express |
- 1 (x4) PCI-e (using x8) slot
|
PCI |
- 1x 32-bit 33MHz PCI (5V) slot
|
|
|
BIOS Type |
- 8Mb Flash EEPROM with Phoenix BIOS®
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- ACPI 1.0 (limited)
- USB Keyboard support
- SMBIOS 2.3
|
|
|
Software |
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- SuperDoctor® III
- Watch Dog
- NMI
- W83793 H/W Monitor
|
Power Configurations |
- ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
- Internal / External Modem Rign-on
|
|
|
Voltage |
- Monitors for CPU Cores +1.8V, +3.3V, +5V, ±12V, +5V Standby
- CPU 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
|
FAN |
- Total of six 4-pin fan headers
- 6 fans with tachometer monitoring
- Status monitor with firmware speed control
- Low noise fan speed control
- Status monitor for on/off control
- Support 3-pin fans (without speed control)
- Pulse Width Modulated (PWM) fan connector
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- CPU / System Overheat LED
- Standby Power alert LED
|
Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
|
|
RoHS
|
|
Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
FCC |
- Passed to meet FCC standard requirement
| |
|
|
Part Number |
Qty |
Description |
PDSML-E+ |
MBD-PDSML-E+-O |
1 |
PDSML-E+ Motherboard |
Manual(s) |
MNL-0903 |
1 |
Motherboard Manual for PDSML-E+ |
I/O Cables |
CBL-0022L
CBL-0036L-03
CBL-0044L |
1 1 4 |
ATX Floppy Cable ATA 66/100 IDE LP Cable SATA Cable (2Ft.) |
I/O Shield |
CSE-PT07L |
1 |
I/O Shield for PDSML-E+ |
Quick Reference Guide |
MNL-0903-QRG |
1 |
Quick Reference Guide |
|
|
|
|
|
|
Part Number |
Qty |
Description |
Heat Sink |
SNK-P0016 |
- |
1U, Pentium® D LGA775, Passive Heatsink |
Riser Card |
RSC-RR1U-32L
RSC-RR1U-E8 |
- - |
1U 32-bit PCI Riser Card (Full height, full length) 1U Universal (SXB-E) Slot to PCI-E Slot Riser Card | | |
|
|
|
|
|
|
|
Key Features
Key Features
1. Intel® Xeon® 3200 / 3000 Series,
Core™ 2 Quad / Duo Series,
Pentium® D, Pentium Extreme Edition,
Pentium 4 & Celeron D in LGA775
Package (FSB 1066/800/533)
2. Intel® 3010 (Mukilteo-2P) Chipset
3. Up to 8GB unbuffered ECC / non-ECC DDR2 667/533 SDRAM
4. 1x Intel® 82573L PCI-e Gigabit
LAN 1x Intel® 82573V PCI-e Gigabit
LAN
5. Built-in SATA ICH7R Controller 4x SATA (3 Gbps) Drive with RAID 0, 1, 5, 10 Support
6. 1 (x4) PCI-Express, 1 Universal Slot Supporting: 1 (x8) PCI-Express OR 1x 32-bit 33MHz PCI slot, 1x 32-bit 33MHz PCI
7. On board XGI Volari Z7 Graphics
8. IPMI 2.0 Support
|
|
|
|
|
|
|