Main Specifications |
Device Type | Motherboard |
Dimensions (WxDxH) | 8" x 9.6" (20.32cm x 24.38cm) |
Form Factor | Proprietary WIO |
Processor |
Cache/Cores | 8 cores, 16 threads |
Compatible Processors | Intel Xeon Processor D-2146NT |
Processor Sockets | Single Socket FCBGA2518 supported, CPU TDP support 80W |
System Memory |
DIMM Sizes | 8GB, 16GB, 32GB, 64GB, 128GB |
Error Detection | Corrects single-bit errors |
| Detects double-bit errors (using ECC memory) |
Memory Capacity | Up to 256GB Registered ECC RDIMM, DDR4-2133MHz, Up to 512GB LRDIMM, DDR4-2133MHz, in 4 DIMM slots |
Memory Type | 2666/2400/2133MHz ECC DDR4 RDIMM, LRDIMM (Operating speed up to 2133MHz) |
Memory Voltage | 1.2V |
On-Board Devices |
Chipset | System on Chip |
Graphics | Aspeed AST2500 BMC |
| Header Only |
IPMI | ASPEED AST2500 |
Network Controllers | Quad LAN with Intel Ethernet Controller I350-AM4 |
| Dual LAN with 10G SFP+ LAN via SoC |
| Dual LAN with 10Gbase-T |
| Quad LAN with 1GbE with Intel I350-AM4 |
| Single LAN with 1GbE with Intel I210 |
| Total 13 LAN ports |
| Single LAN with Realtek RTL8201N PHY (dedicated IPMI) |
SATA | SoC controller for 4 SATA3 (6 Gbps) ports, RAID 0,1,5,10 |
Input / Output |
LAN | 2 10G SFP+ LAN ports |
| 2 RJ45 10GBase-T ports |
| 9 RJ45 Gigabit Ethernet LAN ports |
| 1 RJ45 Dedicated IPMI LAN port |
SATA | 4 SATA3 ports via SoC controller |
Serial Port / Headers | 2 COM Ports (1 rear, 1 header) |
TPM | 1 TPM Header & Chip both |
USB | 4 USB 2.0 ports (4 headers, Type A)) |
| 2 USB 3.1 Gen1 ports (2 Rears Type A) |
Video Output | 1 VGA port, Header Only |
Expansion / Connectivity |
Expansion Slots Total (Free) | 1 PCI-E 3.0 x32 Left Riser Slot |
M.2 | 1 M.2 M-Key SATA/PCI-E 3.0 x4, 2280/22110 |
| 1 M.2 E-Key PCI-E 3.0 x1, 2230 |
| 1 M.2 B-Key SATA/PCI-E 3.0 x2/USB 3.0, 2242 |
System BIOS |
BIOS Features | ACPI 6.1, SMBIOS 3.1, UEFI 2.7, PCI FW 3.2 |
BIOS Type | UEFI 256Mb |
Management |
Power Configurations | +12V DC Power Input |
| ACPI Power Management |
| CPU thermal trip support for processor protection |
Software | Intel Node Manager, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor 5, Watchdog |
System Mangement Software | IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support |
PC Health Monitoring |
FAN | 6x 4-pin fan headers (up to 6 fans), 6 fans with tachometer status monitoring, Dual Cooling Zone, Fan speed control, Overheat LED indication, PWM fan speed control, System level control, Thermal control tachometer fan connectors |
LED | CPU / System Overheat LED, UID/Remote UID |
Other Features | 12V DC or ATX Power Source, 8-pin 12v DC power connector, ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Dual Cooling Zones, Intel® QuickAssist Technology , M.2 NGFF connector, Node Manager Support, RoHS, SDDC, System level control, UID, WOL |
Temperature | Monitoring for CPU and chassis environment |
Voltage | +1.5V, +12V, +3.3V, +5V, +5V standby, 5 (4-pin), 5 -fan status, 6 -fan status, Chassis intrusion header, Memory Voltages, Monitors CPU voltages, Supports system management utility, System level control, System temperature |
Environmental Standards |
Non-operating Relative Humidity | 5% - 95% (non-condensing) |
Non-operating Temperature | -40°C - 70°C (-40°F - 158°F) |
Operating Relative Humidity | 8% - 90% (non-condensing) |
Operating Temperature | 0°C ~ 60°C (32°F ~ 140°F) |
Parts List |
I/O Cables | 4x CBL-0044L |
I/O Shield | 1x MCP-260-00143-0n |
Motherboard | 1x MBD-X11SDW-8C-TP13F |