| Product SKUs | MBD-X7DBT-INF-B (Bulk Pack)
|
| CPU | Dual 771-pin LGA Sockets Supports up to Dual Intel 64-bit Xeon Processor of the same type below:
Quad-Core Intel®
Xeon®Processor 5400/5300 sequence (Harpertown/Clovertown processor) up to 3.16GHz
Dual-Core Intel®
Xeon®Processor 5200/5100/5000 sequence (Wolfdale/Woodcrest/Dempsey processor) up to 3.4GHz
|
| Chipset | Intel 5000P (Blackford) chipset
MCH + ESB2 |
| Memory | Support up to 32GB 667/533MHz DDR2 ECC FB-DIMM memory
8 x 240-pin DIMM sockets
Dual branch memory bus
Memory must be populated in pairs
Memory Mirrioring supported
Memory Size :
4GB, 2GB, 1GB, 512MB
1.8V only
1.5V (AMB)
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel x4 and x8 Single Device Data Correction
|
| Graphics | ATIES1000 controller with 16 MB of video memory |
| SATA | Intel ESB2 SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Window only)
RAID 0, 1, 10 support (Linux) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0
200-pin IPMI slot (SIMSO)
|
| Network Controller | Intel (ESB2/Gilgal) 82563EB Dual-port Gigabit Ethernet Controller
Supports 10 BASE-T. 100BASE-TX, and 1000BASE-T, RJ45 output |
| Input/Ouput | 4 Serial ATA ports
2 x RJ45 LAN ports
2 x USB rear ports
2 x USB internal hearders
1 x VGA prot
1 x Fast UART 16550 serial port
1 x External Infiniband Connector |
| System BIOS | 8 Mb Flash EEPROM with Phoenix BIOS
Plug and Play (PnP)
SMBIOS 2.3, DMI 2.3, PCI 2.2
ACPI 1.0/2.0
USB Key board support
|
| Chassis | 1U Chassis
CSE-808T-980
|