|
MBD-X7SPT-DF-D525
-B |
- X7SPT-DF-D525
(Bulk Pack)
|
|
|
Form Factor |
|
Dimensions |
- 6.8" x 16.4" (17.27cm x 41.66cm)
|
|
|
CPU |
- Intel® Atom™ D525 processor
|
System Bus |
|
|
|
Memory Capacity |
- Two 200-pin SO-DIMM sockets
- Up to 4GB unbuffered non-ECC DDR3 800MHz SO-DIMM (Single Channel)
Some 1066MHz & 1333MHz DDR3 memory can be used, but will operate at 800MHz
|
Memory Type |
- DDR3 800MHz unbuf., non-ECC SO-DIMM
|
DIMM Sizes |
- 2 GB, 1 GB, 512 MB, 256 MB
|
Memory Voltage |
|
|
|
Chipset |
- Intel ICH9R Express
- Intel 82574L
|
SATA |
- Intel ICH9R for SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows Only)
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond® WPCM450 BMC
|
Network Controllers |
- Dual Intel 82574L Gigabit Ethernet
- Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
|
Graphics |
- Onboard Matrox G200eW graphics
|
Super I/O |
|
|
|
Serial ATA |
- 3x SATA ports (3Gbps) via hot-plug slot
- 1x SATA port on board
|
USB |
- 2 USB 2.0 ports
(2 more ports for OEM option)
|
LAN |
|
IPMI |
- Integrated IPMI 2.0 w/ optional shared LAN
|
DOM |
- 1x DOM (Disk on Module) power connector
|
Others |
- Optional 2x COM port headers
- TPM 20-pin header ready
|
|
|
BIOS Type |
- AMI BIOS, 8Mb SPI Flash ROM
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0 / 3.0
- USB Keyboard support
- SMBIOS 2.3
|
|
|
|
|
2U Chassis |
|
|
|
Software |
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
- Watch Dog
|
Power Configurations |
- ACPI/APM Power Management
- Main Switch Override Mechanism
- Suspend to RAM (STR)
- Power-on mode control for AC power recovery
- Internal / External modem remote ring-on
|
|
|
Voltage |
- Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, VBAT, Memory, Chipset
- CPU Core 1-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
|
FAN |
- 2 x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on / off control
- Support 3-pin fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) Support
|
LED |
- CPU / System Overheat LED
|
Other Features |
- Chassis intrusion Header
- SDDC Support
|
|
|
RoHS
|
|
Environmental Spec. |
- Operating Temperature: 0°to 55°C
- Non-operating Temperature: -40°to 70°C
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
FCC |
| |