|
|
|
|
SYS-2027PR-DTR
|
SuperServer 2027PR-DTR (Black)
|
CPU
|
Dual Socket R (LGA 2011)
Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 135W TDP *)
Please contact your Supermicro sales representative for additional details
Note † BIOS version 3.0 or above is required
|
Cache
|
Up to 30MB
|
System Bus
|
QPI up to 8 GT/s
|
Memory Capacity
|
8x 240-pin DDR3 DIMM sockets
Up to 512GB DDR3 ECC LRDIMM
Up to 256GB DDR3 ECC Registered memory (RDIMM)
|
Memory Type
|
1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes
|
32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
Memory Voltage
|
1.5 V, 1.35 V
|
Error Detection
|
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
|
Chipset
|
Intel® C606 Chipset
|
SATA
|
SATA3 (6Gbps) w/ RAID 0, 1, 10
SATA2 (3Gbps) w/ RAID 0, 1, 10
|
IPMI
|
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
|
Network Controllers
|
Intel® i350 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics
|
Matrox G200eW
|
Input / Output (per Node)
|
ACHI SATA
|
2x SATA3 (6Gbps) ports
4x SATA2 (3Gbps) ports
|
SCU SATA
|
2x SATA2 (3Gbps) ports
|
LAN
|
2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port
|
USB
|
2x USB 2.0 ports total (2x rear)
|
VGA
|
1x VGA Port
|
Serial Port / Header
|
1x Fast UART 16550 port / 1 Header
|
BIOS Type
|
128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features
|
Plug and Play (PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI
|
Form Factor
|
2U Rackmount
|
Model
|
CSE-217HD+-R1K28B
|
Height
|
3.47" (88mm)
|
Width
|
17.25" (438mm)
|
Depth
|
28.5" (724mm)
|
Weight
|
85 lbs (38.6kg)
|
Available Colors
|
Black
|
Buttons
|
Power On/Off button
System Reset button
UID button
|
LEDs
|
Power status LED
HDD activity LED
2x Network activity LEDs
Universal Information (UID) LED
|
PCI-Express
|
1x PCI-E 3.0 (x16) slot
1x PCI-E 3.0 (x8) slot
|
Hot-swap
|
8x 2.5" Hot-swap SATA HDD trays
|
Fans
|
4x 8cm heavy duty PWM fans with optimal fan speed control
|
|
1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
|
AC Input
|
1000W Output @ 100-140V, 12-8A, 50-60Hz
1280W Output @ 180-240V, 8-6A, 50-60Hz
|
DC Output
|
1000W: +12V/83A; +5Vsb/4A
1280W: +12V/106.7A, +5Vsb/4A
|
Certification
|
80 Plus Platinum
|
Operating Environment / Compliance
|
RoHS
|
RoHS Compliant
|
Environmental Spec.
|
Operating Temperature: 10°C to 35°C (50°F to 95°F)
Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)
|
|
Part Number
|
QTY
|
Description
|
Motherboard
|
MBD-X9DRT-P
|
2
|
Super X9DRT-P Motherboard
|
Chassis
|
CSE-217HD+-R1K28B
|
1
|
2U Chassis
|
Backplane
|
BPN-SAS3-217HD
|
1
|
RoHS/REACH,PBF 2U Twin Backplane, support 24 SAS3/SATA3 HDD (2.5") with Hot Swapping. Per node for 12 HDDs. PWM fan control, HDD spin up and failure LED supported.
|
Heatsink / Retention
|
SNK-P0048PS
|
4
|
2U Passive CPU Heat Sink for X9 Generation Motherboards w/ Narrow ILM
|
Power Supply
|
PWS-1K28P-SQ
|
2
|
1U 1280W, redundant single output power supply
|
|
|
|
|
|
|
|
Key Features
Two hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
- Dual socket R (LGA 2011) supports
Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
- Up to 1TB ECC LRDIMM, 512GB ECC
RDIMM, up to 1866MHz; 16x DIMM
sockets
- 1x PCI-E 3.0 x16 slot;
1x PCI-E 3.0 x8 slot
- Intel® i350-AM2 Dual port GbE LAN
- Integrated IPMI 2.0 with KVM and
Dedicated LAN
- 8x Hot-swap 2.5" SATA HDD
Bays
- 1280W Redundant Power Supplies
Platinum Level (94%)
|
|
|
|
|
|
|