|
|
|
|
New Page 1
|
MBD-H8DMT-F |
- H8DMT-F (Full IPMI support)
|
|
|
Form
Factor |
|
Dimensions |
- 16.4" x 6.5" (41.6cm x 16.5cm)
|
|
|
CPU |
- Dual 1207-pin Socket F
- Supports up to two Six-Core /
Quad-Core / Dual-Core AMD Opteron™ 2000 Series
processors
- HT3.0 Link support ^
|
|
- Two Hyper-Transport links between the CPUs
|
Chipset |
|
CPU-integrated NB
functions, including DRAM controller and
Hyper-Transport links |
Note: SE
processors not recommended for 1U chassis |
|
|
Memory
Capacity |
- Eight 240-pin DIMM sockets
- Supports up to 64GB DDR2 800/667/533 MHz
memory
- For Dual CPUs: Recommended that memory be
populated equally in adjacent memory banks
- For Single CPU: Memory must be populated in
CPU1 DIMMS only
- Dual channel memory bus
|
Memory
Type |
- DDR2 800/667/533 MHz (registered) ECC SDRAM
72-bit, 240-pin gold-plated DIMMs
|
DIMM
Sizes |
- 256MB, 512MB, 1GB, 2GB, 4GB, 8GB
|
Memory
Voltage |
|
|
|
SATA |
- nVidia MCP55-Pro SATA2 3.0Gbps Controller
- 4x SATA2 Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD support
|
IPMI |
- Winbond WPCM450 BMC IPMI v2.0 support
(Intelligent Platform Management Interface)
- IPMI 2.0 with dedicated LAN support
|
Network Controllers |
- Intel Zoar (82575) Dual-port Gigabit
Ethernet controller with VMDq support
- Support 10/100/1000BASE-T link speeds, 2x
RJ45 ports
|
Graphics |
|
Super
I/O |
|
|
|
SATA |
|
LAN |
|
USB |
- 2x USB rear ports
- 2x USB internal headers
- 2x USB internal ports (Type A)
- Total of 6 USB 2.0 Compliant ports
|
VGA |
|
Serial
Port |
- 2x Fast UART 16550 serial ports
(1x Header, 1x Port)
|
|
|
PCI-Express |
- One PCI-Express (x16) Slot
|
|
|
|
|
1U
Chassis |
-
CSE-809T-780B
- Please use: Air-shroud (MCP-310-80903-0B) &
CPU heat sink (SNK-P0022+) Both are sold separately
|
2U
Chassis |
|
|
|
BIOS
Type |
- 8Mb Flash EEPROM with AMI® BIOS
|
BIOS
Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus Protection
- SMBIOS 2.3
|
|
|
Software |
- IPMI (Intelligent Platform Management
Interface) 2.0
-
Super
Doctor III
- Watch Dog
- NMI
|
Power
Configurations |
- ACPI Power Management
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- CPU Fan auto-off in sleep mode
- Power-on mode control for AC power loss
recovery
|
|
|
CPU |
- Monitors CPU Core Voltages, +3.3V, +12V,
+5V Standby, 1.5V, VBAT, VDD, HyperTransport Link voltage,
memory voltage, Chipset voltage
- CPU switching voltage regulator
|
FAN |
- Total of Four fan headers supporting up to
4 fans
- 4x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on / off control
- Low noise fan speed control
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal Control for 4x Fan Status
- I2C Temperature Sensing Logic
|
LED |
- CPU / System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED
|
Other
Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
|
|
RoHS
|
|
Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
|
|
|
|
Key Features
New Page 1
Key Features
1. Two Six-Core / Quad-Core / Dual-Core
AMD Opteron™ 2000 Series (Socket F)
support; HT3.0 Link support ^
2. nVidia MCP55-Pro Chipset with
HyperTransport Link
3. Up to 64GB of ECC, Registered
DDR2 800/667/533 SDRAM
4. Dual-port Gigabit Ethernet Intel Zoar
(82575) LAN Controller
5. Four SATA2 connectors at 3.0Gb/s
Support RAID 0, 1, 0+1, 5, JBOD
6. One PCI-Express (x16) Slot
7. Integrated Graphics
8. IPMI 2.0 w/ Dedicated LAN Support
|
|
|
|
|
|
|