 |
|
SYS-6015P-TRB |
- SuperServer 6015P-TRB (Black)
|
| |
|
|
| CPU |
- Dual 771-pin LGA Sockets
- Supports up to two Intel® 64-bit
Xeon® processor(s) of the same
type below:
- Quad-Core Intel®
Xeon®Processor
5400/5300 sequence
(Harpertown
/Clovertown processor)
up to 3.16 GHz
- Dual-Core Intel®
Xeon®Processor 5200/5100/5000
sequence (Wolfdale
/Woodcrest/Dempsey processor) up to
3.40 GHz
|
| System
Bus |
- 1333 / 1066 / 667 MHz system bus
|
|
Operating System Software |
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
| |
|
|
| Memory
Capacity |
- Eight 240-pin DIMM sockets
- Supports up to 32 GB 667/533MHz FB-DIMM
memory
- Dual branch memory bus
- Memory must be populated in pairs
|
| Memory
Type |
- 667/533MHz FB-DIMM (Fully Buffered DIMM)
ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM
Sizes |
|
| Memory
Voltage |
|
| Error
Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC
memory)
- Supports Intel® x4 Single Device Data
Correction (SDDC)
|
| |
|
|
|
Chipset |
- Intel® 5000P (Blackford) chipset
- MCH + PXH + ESB2
|
| SATA |
- ESB2 SATA Controller
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
|
| IPMI |
|
|
Network Controllers |
- Intel® (ESB2/Gilgal) 82563EB Dual-Port
Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and
1000BASE-T, RJ45 output
- Intel® I/OAT support for
fast, scaleable, and reliable networking
|
|
Graphics |
- ATI ES1000 controller with 16 MB of video
memory
|
| Super
I/O |
|
| Clock
Generator |
|
| |
|
|
| Left
Universal Slot |
- 1 (x8) PCI-e slot OR
- 1x 64-bit 100MHz PCI-X (3.3V) slot
|
| Right
Universal Slot |
- 1 (x8) PCI-e slot OR
- 1x 64-bit 133MHz PCI-X (3.3V) slot
|
| IPMI |
- 1 SIM1U Slot (IPMI 2.0)
(Supermicro Intelligent Management)
|
| |
|
|
| Serial
ATA |
- Six Serial ATA ports
- Four SATA hard drives supported
|
| IDE |
- Single EIDE channels support up to two UDMA
IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and
ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
|
| USB |
- 2x USB rear ports
- 2x USB internal headers, 1 dual, 1 single
- USB 2.0 Compliant / 1.1 Compliant
|
| VGA |
|
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial
Port / Header |
- 2 Fast UART 16550 serial ports
|
|
 |
|
|
|
|
| Form
Factor |
|
| Model |
|
| |
|
|
| Height |
|
| Width |
|
| Depth |
|
| Gross
Weight |
|
|
Available Colors |
|
| |
|
|
|
Buttons |
- Power On/Off button
- UID button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
- UID LED
|
| Ports |
|
| |
|
|
|
Hot-swap |
- 4x 3.5" Hot-swap SATA drive bays
|
| |
|
|
| Floppy |
- 3.5" 1.44MB Slim Floppy Drive
|
|
DVD-ROM |
|
| |
|
|
SAS/SATA HDD
Backplane
(SAS support requires optional SAS controller) |
| |
|
|
| Fans |
- 4x 6-pin Counter-rotating Cooling Fans
|
| |
|
|
| 700W (1 + 1)
Redundant AC-DC high-efficiency power supply w/ PFC |
| AC
Voltage |
- 100 - 240V, 60-50Hz, 10 - 4 Amp
|
| +5V
standby |
|
| +12V |
|
| With
Power Distributor |
- +5V: 30 Amp
- +3.3V: 24 Amp
- -12V: 0.6 Amp
|
| |
|
|
| CPU |
- Monitors for CPU Cores, +3.3V, +5V, ±12V,
+5V Standby, VBAT
- CPU Core 5-Phase-switching voltage
regulator with auto-sense from 0.86V-1.63V
|
| FAN |
- Total of ten proprietary fan headers for up
to ten fans
- Ten fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
|
| LED |
- CPU / System Overheat LED
|
| Other
Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
|
| |
|
|
| BIOS
Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
| BIOS
Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
- Fan Speed Control
|
| |
|
Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|