 |
 |
 |
|
|
 |
| CSE-847E26-R1400LPB |
- SuperChassis 847E26-R1400LPB (Black)
|
| |
|
|
4U chassis support for motherboards up to size ATX, E-ATX,
13.68" x 13", UIO motherboards |
| |
|
|
|
Supports dual, single Intel® / AMD processors
|
| |
|
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
|
| 7x Low-profile expansion slots |
| |
|
|
| Server Chassis |
- 36x (24 front + 12 rear) 3.5" Hot-swap HDD bays
- SAS or enterprise SATA HDD only recommended
|
| |
|
|
|
HDD Backplane supports 36 SAS hard drives (24x front + 12 rear)
|
| |
|
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power Fail LED
|
|
 |
|
|
|
| Fans |
- 7x 8cm hot-swap cooling fans
- Redundant cooling
|
| |
|
|
| Chassis intrusion switch |
| |
|
|
|
| Operating Temperature Range |
|
| Non-Operating Temperature Range |
-
-40°C ~ 60°C (-40°F ~ 140°F)
|
| Operating Relative Humidity Range |
-
8% ~ 90% (non-condensing)
|
| Non-Operating Relative Humidity Range |
-
5% - 95% (non-condensing)
|
| |
|
| 1400W high-efficiency (1+1) redundant power supply with PMBus |
| AC Input |
- 1100W Output @ 100-140V, 13.5-9.5A, 50-60Hz
- 1400W Output @ 180-240V, 9.5-7.0A, 50-60Hz
|
| DC Output |
- 1100W: +12V/92A; +5Vsb/4A
- 1400W: +12V/116A; +5Vsb/4A
|
| With Distributor |
- +5V: 100 Amp
- +3.3V: 30 Amp
- -12V: 0.6 Amp
|
| Certification |
Gold Certified
[ Test Report ]
|
| |
|
|
| Power Supply Safety / EMC |
- USA - UL listed, FCC
- Canada - CUL listed
- Germany - TUV Certified
- Europe/CE Mark
- EN 60950/IEC 60950-Compliant
| |
|
|
| |
Part Number |
Qty |
Description |
| Chassis |
CSE-847E26-R1400LPB |
1 |
4U Chassis (Black) - 847E26-R1400LPB |
| Backplane |
BPN-SAS2-826EL2 |
1 |
826 backplane with two LSI SAS2X28 expander chip |
| Backplane |
BPN-SAS2-846EL2 |
1 |
Backplane supports upto 24 SAS/SATA |
| Power Supply |
PWS-1K41P-1R |
2 |
1400W 1U GOLD LEVEL PWS W/ PM BUS & WX3 |
| Power Distributor |
PDB-PT847-8824 |
1 |
24pin standard output with 5V high current 100Amp power distributor board for SC847 |
| Air Shroud |
MCP- 310-49004-0N |
1 |
SC847/417 DP X9 universal PC air shroud 1368x13/12x13MB |
| Cable 1 |
CBL-0071L |
1 |
ROUND 16 pin TO 16 PIN RIBBON FP CABLE 30 |
| Cable 2 |
CBL-0088L |
7 |
10.5\", 4 PIN MIDDLE FAN POWER EXTENSION (PWM). 24AWG |
| Cable 3 |
CBL-0160L |
2 |
NEMA5-15P to C13 US power cord 16AWG 6ft, PBF (default for high watt) |
| Cable 4 |
CBL-0217L |
1 |
16 pin control panel converter cable for SC826,846, 22cm, PBF |
| Fan 1 |
FAN-0126L4 |
7 |
80x80x38 mm 7K RPM Chassis Middle Fan w/ Housing |
| Front Panel |
MCP-280-82601-0N |
1 |
Front control board adapter (TB826) for SC216,826,936,846 |
| Drive Tray(s) |
MCP-220-00075-0B |
36 |
Black gen 5.5 hot-swap 3.5\" HDD tray |
| Mounting Rails |
MCP-290-00057-0N |
1 set |
Rail set, quick/quick, default for 4U 17.2 |
| Rear Window |
MCP-240-82506-0N |
1 |
LP Rear Window for SC825,825M,826,213,216 |
|
|
|
|
|
|
| |
Part Number |
Qty |
Description |
| Heatsink / Retention |
- |
- |
Please refer to our Thermal Components Matrix |
| Cable(s) |
CBL-0166L
CBL-0168L-LP
CBL-0351L-LP
CBL-0352L-LP |
-
-
-
- |
SAS 826EL2/EL1 BP External Cascading Cable
SAS 826EL2 BP 2-Port Internal Cascading Cable
85CM 1-PORT EXT IPASS TO INT IPASS LP
85CM 2-PORT ETX IPASS TO INT IPASS LP |
| Cable(s) |
CBL-0108L-02
CBL-0281L |
-
- |
SFF 8087 to SFF 8087 Internal Backplane Cable, 39cm
SFF 8087 to SFF 8087 Internal Backplane Cable, 75cm |
| Drive Trays |
MCP-220-84701-0N
MCP-220-00043-0N |
-
- |
Internal drive bay for one 3.5" HDD or two 2.5" HDD
3.5" convert to 2.5" hot-swap HDD Tray |
| Mounting Rails |
MCP-290-00058-0N
MCP-290-00060-0N |
-
- |
19" to 26.6" rail set, Quick Release, Tool-less
Square hole to round hole rail adaptor set |
Front Bezel
( Compatibility Table ) |
MCP-210-84601-0B |
- |
Front Bezel Cover, Black with Key Lock |
| RAID cards |
AOC-USAS2LP-H8iR |
- |
8 int ports, supports 240 HDDs |
|
|
|
|
|
|
|
|
 |
|
 |
|
Key Features
Key Features
• High Efficiency Power &
High Storage Capacity
1. Extra High-Density 4U Storage Chassis
2. High-Availability Features: Redundant,
Hot-pluggable cooling system, Power
Supplies, Hot-swap drives
3. Redundant (1+1) 1400W Gold Level
power supply with PMBus function
4. Maximum 3.5" hot-swap drives density
36x (24 front + 12 rear) HDD bays; E26
- 2x Expanders support SAS2 (6Gb/s)
5. 7x Low-profile expansion slots
6. 7x 8cm (middle) Hot-swap cooling
fans, redundant cooling
|
|
|
|
|
|
|