|
|
|
|
|
| MBD-X11SSA-F | |
| |
| Form Factor | | Dimensions | - 12" x 9.6" (30.48cm x 24.38cm)
|
| |
| CPU | - Intel® 7th/6th Generation Core i3 series
- Intel® Celeron®
- Intel® Pentium®
- Intel® Xeon® Processor E3-1200 v6/v5 series
- Socket H4 (LGA 1151) supported; CPU TDP support 80W
| Note | - BIOS version 2.0 or above is required to support 7th Generation Intel® Core™ i3 Processors and Intel® Xeon® Processor E3-1200 v6 series
|
| |
| Memory Capacity | - 64GB Unbuffered ECC UDIMM, DDR4-2400MHz, in 4 DIMM slots
| Memory Type | - 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs
| DIMM Sizes | | Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
| Chipset | | SATA | - Intel® C236 controller for 6 SATA3 (6 Gbps) ports; RAID 0,1,5,10
| IPMI | | Network Controllers | - Dual Intel® Ethernet Controller I210-AT
| Graphics | |
| |
| USB | - 6 USB 2.0 ports (2 rear, 4 via header(s))
- 5 USB 3.0 ports (2 rear, 2 via header(s), 1 Type A)
| Video Output | | Serial Port / Header | - 2 COM Ports (1 rear, 1 header(s))
| TPM | |
| | |
| PCI-E | - 1 PCI-E 3.0 x8
- 1 PCI-E 3.0 x8 (in x16 slot)
- 1 PCI-E 3.0 x4 (in x8 slot)
- 4 - 5V PCI 32bit
| M.2 | - Interface: PCIe 3.0 x4 and SATA
- Form Factor: 2242, 2260, 2280, 22110
|
| |
| BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.7.1
- UEFI 2.3.1
- RTC (Real Time Clock) Wakeup
|
| |
| Software | - Intel® Node Manager
- IPMI2.0
- NMI
- SPM
- SSM
- SUM
- SuperDoctor® 5
- Watchdog
| Power Configurations | - ACPI Power Management
- Power-on mode for AC power recovery
|
| |
| Voltage | - +12V, +3.3V, +5V, +5V standby, Chassis intrusion header, Monitors CPU voltages, Supports system management utility, System level control, VBAT
| FAN | - 5x 4-pin fan headers (up to 5 fans)
- Fan speed control
- Overheat LED indication
- Thermal control tachometer fan connectors
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
- PECI
| LED | - CPU / System Overheat LED
- UID/Remote UID
| Other Features | - Control of power-on for recovery from AC power loss
- CPU thermal trip support for processor protection
- M.2 NGFF connector
- WOL
|
| |
| Operating Temperature Range | - 0°C ~ 50°C (32°F ~ 122°F)
| Non-Operating Temperature Range | - -40°C - 70°C (-40°F - 158°F)
| Operating Relative Humidity Range | - 8% - 90% (non-condensing)
| Non-Operating Relative Humidity Range | - 5% - 95% (non-condensing)
|
|
|
|
|
|
|
|
|
Key Features
- Single socket H4 (LGA 1151) supports Intel® Xeon® processor E3-1200 v5, Intel® 6th Gen. Core™ i3 series, Intel® Celeron® and Intel® Pentium®
- Intel® C236 chipset
- Up to 64GB Unbuffered ECC UDIMM DDR4 2133MHz; 4x DIMM slots
- Expansion slots: 1 PCI-E 3.0 x8 (in x16), 1 PCI-E 3.0 x8, 1 PCI-E 3.0 x4 (in x8) 4 5V PCI 32-bit slots
- Dual GbE LAN with Intel® i210-AT
- 6x SATA3 (6Gbps) via C236; RAID 0, 1, 5, 10
- I/O: 1x VGA, 2x COM, TPM 1.2 header
- 2x SuperDOM with built-in power
- 5x USB 3.0 (2 rear + 2 via header + 1 Type A), 6x USB 2.0 (2 rear + 4 via headers)
- M.2 NGFF connector
|
|
|
|
|
|
|