 |
|
SYS-6026TT-HIBXRF |
- SuperServer 6026TT-HIBXRF (Black)
|
| |
|
|
4x Super X8DTT-HIBXF+ |
| |
|
|
| CPU |
- 8 x Quad-core Xeon E5520 64-bit 2.26Ghz Processors
5.86GT/s with smart cache
|
| |
|
|
| Memory
Capacity |
- 192GB DDR3-1333 ECC/Registered memories
|
| Memory
Voltage |
|
| Error
Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC
memory)
- Supports Intel® x4 and x8 Single Device
Data Correction (SDDC)
|
| |
|
|
|
Infiniband |
- Mellanox ConnectX DDR Infiniband 20Gbps
Controller
|
|
Chipset |
- Intel® 5520 (Tylersburg) chipset
- ICH10R + IOH-36D
|
| SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
|
| IPMI |
- Support for Intelligent Platform Management
Interface v.2.0
- IPMI 2.0 with virtual media over LAN and
KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
|
Network Controllers |
- Dual Intel® 82574L Gigabit Ethernet
Controller
- Supports 10BASE-T, 100BASE-TX, and
1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
|
Graphics |
|
| Super
I/O |
|
| Clock
Generator |
|
| |
|
|
| Serial
ATA |
- Six Serial ATA ports
- 3 SATA hard drives supported
|
| LAN |
- 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 2 rear + 1 header (2 Ports)
- 4 total USB ports, 2.0 Compliant / 1.1
Compliant
|
| VGA |
|
| Serial
Port |
- 1 Fast UART 16550 serial port
|
|
Infiniband |
- 1 External QSFP Infiniband Connector
|
| |
|
|
| BIOS
Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS
Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
 |
|
|
|
|
| Form
Factor |
|
| Model |
|
| |
|
|
| Height |
3.5" (89mm) |
| Width |
17.2" (437mm) |
| Depth |
28.5" (724mm) |
| Gross Weight |
85 lbs (38.6kg) |
| Available Colors |
Black |
| |
|
|
|
Buttons |
- Power On/Off button
- UID button
|
| LEDs |
- Power LED (on power button)
- Network activity LED
- System Overheat/fan fail/power fail/ LED
- UID LED (on UID button)
|
| |
|
|
|
PCI-Express |
- 1 (x16) PCI-E ( Low Profile)
|
| |
|
|
|
Hot-swap |
- 3x 3.5" 2TB 7200 RPM SATA Hot-swap drive
|
| |
|
|
| 2U Hard drive
Backplane |
| |
|
|
| Fans |
|
| |
|
|
| 1400W
high-efficiency (1+1) redundant power supply with PMBus |
| AC
Input |
- 1100W Output @ 100-140V, 13.5-9.5A, 50-60Hz
- 1400W Output @ 180-240V, 9.5-7.0A, 50-60Hz
|
| DC
Output |
- 1100W: +12V/92A; +5Vsb/4A
- 1400W: +12V/116A; +5Vsb/4A
|
| With
Distributor |
- +5V: 30 Amp
- +3.3V: 24 Amp
- -12V: 0.6 Amp
|
|
Certification |
Gold Certified
[
Test Report ]
|
| |
|
|
| CPU |
- Monitors for CPU Cores,+1.5V, +3.3V, +5V,
+12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
- CPU Core 6-Phase-switching voltage
regulator
|
| FAN |
- Total of four 4-pin PWM fans
- 4x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 4x Fan Connectors
- PSU I2C temperature sensing
logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- Power Fail / Overheat LED
- Suspend-state Indicator LED
- UID LED
|
| Other
Features |
|
|
