Supermicro 1U server with 4xQuad-core Xeon 3.0GHz processors 48GB DDR2 memory 8x600GB SAS 2.5" 10KRPM hard drives with 780W High-efficiency Power Supply 2xDual port GbE Lan 2xIPMI 2.0 Full Warranty

Home > Special Offer >

Supermicro 1U server with 4xQuad-core Xeon 3.0GHz processors 48GB DDR2 memory 8x600GB SAS 2.5" 10KRPM hard drives with 780W High-efficiency Power Supply 2xDual port GbE Lan 2xIPMI 2.0 Full Warranty Free Ground Shipping

Alternative Views:

Market Price $5,499.95

Sale Price: $4,750.00

Savings: $749.95

Quantity in Stock:5
Product Code: SYS-S1U-8C48M

Qty:

Description

Technical Specs

Supermicro 1U integrated powerful server (with 2 nodes inside)

·4 x Intel Xeon Quad core E5450 3.0GHz processors
·48GB DDR2 ECC memory
·8 x SAS 2.5" 600GB 10KRPM hard drives
·2 x Intel® 82575 Dual-Port Ethernet Controller
·2 x Integrated IPMI 2.0 with KVM and Dedicated LAN
·Build on board SAS controller

Full Manufacture Warranty from Supermicro
Free Ground Shipping
Please note: the color of chassis is black.

New Page 1


Motherboards

Super X7DCT-3F + Super X7DCT-3F


Processor/Cache

CPU	4 x Intel Xeon Quad-core E5450 3.0GHz processors 12MB Cache


System Memory

Memory Capacity	48GB DDR2 ECC memory
Memory Voltage	1.8V only
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC)


On-Board Devices (per Node)

Chipset	Intel® 5100 (San Clemente) chipset Intel® ICH9R SB
SAS	LSI SAS1064E 8 x SAS 2.5" 600GB 10KRPM hard drives RAID 0, 1, 10 support (Optional: AOC-IButton68) RAID 5 support
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC
Network Controllers	Intel® 82575 Dual-Port Gigabit Ethernet Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) Intel® I/OAT support for fast, scaleable, and reliable networking
Graphics	Matrox G200 8MB DDR2
Super I/O	Winbond W83627HG chip
Clock Generator	ICS9LPR501 chip


Input / Output (per Node)

SAS	4 SAS / SATA ports
Serial ATA	Four Serial ATA ports Four SATA hard drives supported
LAN	2x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port
USB	2 rear + 1 Type A connector + 2 headers (2 Ports) 5 total USB ports, 2.0 Compliant / 1.1 Compliant
VGA	1x VGA Port
Serial Port	1 Fast UART 16550 serial port


System BIOS

BIOS Type	16Mb SPI Flash with Phoenix ® BIOS
BIOS Features	Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 1.0/2.0/3.0 USB Keyboard support Hardware BIOS Virus protection


Chassis

Form Factor	1U Rackmount
Model	SYS-1025TC-3FB


Dimensions

Height	1.7" (43mm)
Width	17.2" (437mm)
Depth	27.75" (705mm)
Gross Weight	50 lbs (22.5kg)
Available Colors	Black


Front Panel (per Node)

Buttons	Power On/Off button System Reset button
LEDs	Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED


Expansion Slots (per Node)

PCI-Express	1 (x8) PCI-e (in x16 slot - Low Profile)


Drive Bays (per Node)

Hot-swap	4x 2.5" SAS Hot-swap drive bays


SATA Backplane

1U SATA Backplane


System Cooling

Fans	6x Cooling Fans


Power Supply

780W AC to DC power supply w/ PFC
AC Input	100-240V, 60-50Hz, 9.5-3.5Amp
+5V sb	4 Amp
+12V	65 Amp @ 180-240Vac 58 Amp @ 100-140Vac


Management

Software	Optional IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 SuperDoctor® III Watch Dog NMI
Power Configurations	ACPI Power Management Main Switch Override Mechansim Power-on mode for AC power recovery


PC Health Monitoring

CPU	Monitors for CPU Cores,+1.5V, +3.3V, +5V, ±12V, +5 Stdby, VBAT CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN	Total of three 4-pin fans 3x fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors PSU I²C temperature sensing logic Thermal Monitor 2 (TM2) support PECI
LED	CPU / System Overheat LED Suspend-state Indicator LED
Other Features	SDDC Support


Operating Environment / Compliance

RoHS	RoHS Compliant 5/6, Server Exemption
Environmental Specifications	Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

Share your knowledge of this product. Be the first to write a review »